• 한국공간구조학회논문집
• /
• 제2권1호
• /
• pp.93-102
• /
• 2002

Pressure loads caused by gas, water and wind are the most important load cases in structural analysis. Often the pressure loads are approximated by constant directional loads since it is difficult to evaluate the exact value. However, the pressure load is defined as a displacement dependent one and it is necessary to consider the follower effects of the load in analysis procedure. In this study, the large deformation analysis considering geometrical nonlinearity for shell structures under pressure loads is presented. Finite element by using a three-node flat triangular shell element is formulated and the follower effects of the pressure load are included in the formulation. Some of results are presented for cantilevered beam under uniform external pressure and thin circular ring under non-uniform external pressure. The present results are in good agreement with the results available in existing literature and commercial software ABAQUS.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.475-484
• /
• 1999

압력절점은 요소의 균등한 압력증분을 1개의 자유도로 갖는 절점이며, 유한요소의 하중-변위 평형방정식에 체적과 압력의 관계를 추가하여 한계압력 이후에서도 체적변화에 따른 압력증분을 직접적으로 제저할 수 있는 절점이다. 본 연구에서는 철근콘크리트의 평면 구성 방정식과 적층정식화에 적용한 쉘 요소에 압력절점을 추가하고 해석시 체적을 제어함으로써 철근콘크리트 원통형 구조에 대해 파괴까지의 극한내압 능력을 해석할 수 있는 체적제어 비선형 해석기법을 개발하였다. 본 논문에서 제안한 해석기법을 이용하여 철근콘크리트 원통형 구조물에 대하여 비선형 해석을 수행하여 한계압력과 한계압력 이후의 구조물의 거동을 예측하였으며 실험결과와 비교 검증하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.302-305
• /
• 2009

본 논문에서는 환자나 만성질환자가 공간적으로 구속을 받지 않고 자유롭게 이동이 가능한 상태에서 건강상태 모니터링이 가능한 셀룰러폰(Cellular telephone)에 기반한 통합형 생체신호 계측 및 생체정보 관리가 가능한 생체 관리 시스템을 설계하고자 하였다. 메디컬센서 인터페이스를 센서노드에 부착할 경우 개별적인 센서노드가 필요하기 때문에 생체 디바이스의 문제점을 해결하기 위해서 통합형 메디컬 센서노드 어플리케이션을 설계하였다. 셀룰러폰으로 ECG(Electrocardiogram), 혈압(Blood pressure), 혈당(Blood sugar)과 같은 생체신호를 모니터링해서 비정상적인 생체신호를 판별하며, 당일 측정한 생체신호를 셀룰러폰에 저장해 과거에 측정한 메디컬 기록들과 함께 차트로 리뷰 가능하다. 본 논문에서는 기존의 실시간 생체 모니터링 비해, 개발된 셀룰러폰 기반의 헬스케어용 관리시스템은 고/저혈압, 당료를 갖고 있는 만성질환자가 상시적으로 질병을 관리할 수 있으며, 또한 CDMA의 특성상 넓은 환경에서도 전송이 가능하무로서 무선센서네트워크를 이용하기 위해 CDMA 방식과 통합하였다.

• Archives of Reconstructive Microsurgery
• /
• 제15권2호
• /
• pp.107-110
• /
• 2006

Malignancy in a chronic pressure sore is rare among Marjolin's ulcers. Carcinomas arising in pressure sores are highly aggressive and usually fatal. Although carcinomas in pressure sores are generally well-differentiated squamous carcinomas, they can show quite an aggressive course and do not respond either to chemotherapy or radiotherapy. The mortality rate is high despite wide surgical resection. Extensive surgical excisions with wide surgical margins are necessary and elective lymph node dissection should be considered for optimal therapy. We report a squamous carcinoma arising in a pressure sore. The related literature was reviewed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.168-175
• /
• 1996

This paper deals with the variable-node element for fluid flow and the adaptive h-version mesh refinement algorithm. The transient element has been formulated by the Galerkin approach in which the pressure term is replaced with the penalty function. The present element having variable mid-side node and is suitable for constructing a locally refined mesh avoiding the use of the highly distorted elements. A modified Gauss quadrature is needed to integrate the element matrices to solve the trouble associated with the discontinuity of derivatives of shape functions. Several numerical examples show that the proposed element can be effectively used in the h-version adapt ive mesh refinement

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권6호
• /
• pp.2282-2303
• /
• 2021

To solve the problems of heavy computing load and system transmission pressure in energy internet (EI), we establish a three-tier cloud-edge integrated EI network based on a cloud-edge collaborative computing to achieve the tradeoff between energy consumption and the system delay. A joint optimization problem for resource allocation and task offloading in the threetier cloud-edge integrated EI network is formulated to minimize the total system cost under the constraints of the task scheduling binary variables of each sensor node, the maximum uplink transmit power of each sensor node, the limited computation capability of the sensor node and the maximum computation resource of each edge server, which is a Mixed Integer Non-linear Programming (MINLP) problem. To solve the problem, we propose a joint task offloading and resource allocation algorithm (JTOARA), which is decomposed into three subproblems including the uplink transmission power allocation sub-problem, the computation resource allocation sub-problem, and the offloading scheme selection subproblem. Then, the power allocation of each sensor node is achieved by bisection search algorithm, which has a fast convergence. While the computation resource allocation is derived by line optimization method and convex optimization theory. Finally, to achieve the optimal task offloading, we propose a cloud-edge collaborative computation offloading schemes based on game theory and prove the existence of Nash Equilibrium. The simulation results demonstrate that our proposed algorithm can improve output performance as comparing with the conventional algorithms, and its performance is close to the that of the enumerative algorithm.

• Nuclear Engineering and Technology
• /
• 제23권4호
• /
• pp.363-373
• /
• 1991

핵연료봉 내압 설계기준에 의하면 핵연료봉 갭의 증가만 발생하지 않는다면 봉내압이 계통압력을 초과할 수 있다. 본 연구에서는 이러한 봉내압 설계기준에 따른 정량적이고 보수적인 허용 봉내압을 봉출력의 함수로 생산하였는 바 허용 봉내압은 봉출력의 증가에 따라 감소하였다. 한편, 본 연구에서 구한 허용 봉내압을 봉내압 설계 기준으로 적용하면 핵연료봉 압력 검증을 위한 현행 설계절차를 단순화시킨다. 왜냐하면, 봉내압이 계통압력을 초과할 경우 각각의 주어진 시간 및 축 방향 지점에서 핵연료봉 갭 증가를 계산해야 하는 현행 설계절차가 불필요하기 때문이다.

• 대한조선학회논문집
• /
• 제58권5호
• /
• pp.271-280
• /
• 2021

The code developed using a pressure-based method for unified conservation laws of incompressible/compressible fluids is expanded to handle moving or deforming body boundaries using the hybrid Cartesian/immersed boundary method. An instantaneous pressure field is calculated from a pressure Poisson equation for the whole fluid domain, including the compressible gas region. The polytropic gas is assumed for the compressible fluid so that the energy equation is decoupled. Immersed boundary nodes are identified based on edges crossing body boundaries. The velocity vector is reconstructed at the immersed boundary node using an interpolation along the assigned local normal line. The developed code is validated by comparing the time histories of pressure and wave elevation for sloshing in a rectangular and a membrane-type tank. The validated code is applied to simulate air cushion effects in a rectangular tank under sway motion. Time variations of pressure fields are analyzed in detail as the air pocket pulsates. It is shown that the contraction and expansion of the air pocket dominate the pressure loads on the wall of the tank. The present results are in good agreement with other experimental and computational results for the amplitude and the decay of the pressure oscillations measured at the pressure gauges.

• 한국통신학회논문지
• /
• 제33권11A호
• /
• pp.1021-1033
• /
• 2008

최근 무선 센서 네트워크를 통해 멀티미디어 데이터를 전송하고자 하는 노력이 늘고 있다. 무선 센서 네트워크는 저 전력 소형 노드를 이용하며, 낮은 전송 속도를 갖는 네트워크이다. 하지만 멀티미디어 데이터는 비교적 큰 용량을 가지며, 전송 시 지연에 민감한 특성을 갖는다. 그러므로 무선 센서 네트워크를 이용하여 멀티미디어 데이터를 전송하는 것은 어려운 일이 아닐 수 없다. 따라서 본 논문에서는 무선 센서 네트워크 환경에서 멀티미디어 데이터 전송을 위해 경로의 겹침이 없는 노드 독립적인 (Node-Disjoint) Multi-path Routing방법을 제안한다. 대용량의 데이터 전송 시 기존의 Single-path Routing 방법은 하나의 경로만을 사용하기 때문에 특정 노드에 부하를 가중시켜 데이터 손실이나 지연을 야기 시킬 수 있지만, 본 논문에서 제안하는 TinyONDMR(Tiny Optimized Node-Disjoint Multi-path Routing)방법은 서로 분리된 다른 경로에 데이터를 분산시켜 전송함으로써, 네트워크의 성능을 향상시킨다. 또한 Multi-path를 찾기 위한 라우팅 과정에서 발생하는 라우팅 오버헤드를 줄여 네트워크 부하를 감소시킨다.

• Ocean Systems Engineering
• /
• 제13권1호
• /
• pp.57-77
• /
• 2023

In the present study, the total hydrodynamic pressure exerted by the fluid on walls of rectangular tanks due to horizontal excitations of different frequencies, is investigated by pressure based finite element method. Fluid within the tanks is invisid, compressible and its motion is considered to be irrotational and it is simulated by two dimensional eight-node isoparametric. The walls of the tanks are assumed to be rigid. The total hydrodynamic pressure increases with the increase of exciting frequency and has maximum value when the exciting frequency is equal to the fundamental frequency. However, the hydrodynamic pressure has decreasing trend for the frequency greater than the fundamental frequency. Hydrodynamic pressure at the free surface is independent to the height of fluid. However, the pressure at base and mid height of vertical wall depends on height of fluid. At these two locations, the hydrodynamic pressure decreases with the increase of fluid depth. The depth of undisturbed fluid near the base increases with the increase of depth of fluid when it is excited with fundamental frequency of fluid. The sloshing of fluid with in the tank increases with the increase of exciting frequency and has maximum value when the exciting frequency is equal to the fundamental frequency of liquid. However, this vertical displacement is quite less when the exciting frequency is greater than the fundamental frequency.