• International conference on construction engineering and project management
• /
• 2005.10a
• /
• pp.869-874
• /
• 2005

Given the intense competition and slowdown in domestic demands, there is greater pressure on Singapore contractors to seek overseas markets for revenue and growth. This impetus, coupled with emerging economic reforms in the regional developing countries, has invariably created numerous opportunities for Singapore contractors. However, mixed results were reported on their overseas performance so far. Consequently, this paper aims to formulate a framework that would assist Singapore contractors to successfully export their services into developing countries. The proposed framework comprises ten critical success factors (CSFs), which are identified from in-depth interviews with eight Singapore contractors. These ten success factors are subsequently classified under three different stages, namely initial, entry and operational stages. Preliminary results show that Singapore contractors are most focused on the entry stage, with the highest number of CSFs.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.387-395
• /
• 2011

In the construction of tall-building, concrete pumping influences the success of the project. In order to establish pumping technology for high speed construction of tall building, study for quantitative evaluation of flow characteristics and pumpability should be conducted. So in this study, the characteristics including the inner pipe pressure, rheological properties of concrete and mortar through the continuous pumping test were evaluated. Then we analyzed the relations between rheological properties and pumpability. In the result of test, there are high correlations between the rheological characteristics which represented by yield stress and plastic viscosity and pressure loss with pipe length. Also, we estimated pressure loss according to conditions of concrete mix and pumping through the evaluation of inner pipe friction.

• Archives of Reconstructive Microsurgery
• /
• v.3 no.1
• /
• pp.40-44
• /
• 1994

Microsurgery has advanced beyond its nascent stages reaching success rates of 90% to 95%. However, this means that even in the best circumstances, 5% to 10% of free flaps and replants fail. Almost all failures are due to vessel thrombosis, resulting in ischemia of the transplanted tissue. Many attemps have been undertaken to treat and reverse its effects. Zdeblick and colleagues noted an improvement in the viability of amputated limbs replanted after an extended period of ischemia following intraarterial infusion of urokinase. Subsequent studies have investigated many modalities of urokinase administration in various animal models by differing ischemic periods. These studies, however, have failed to establish a definitive, generally accepted protocol for administration of urokinase in the salvage of tissue subjected to prolonged ischemia. Our clinical observations suggest that a bolus of urokinase delivered under pressure may increase the thromoblytic effect of the drug, probably by means of increased delivery to microvasculature. We intend to investigate the role of selective pressure perfusion of ischemic flaps as a new means for increasing the effectiveness of urokinase in the treatment of the "no-reflow" phenomenon. A total of 32 male New Zealand rabbits were used and divided into the four groups according to the method of infusion. After 12 hours of ischemia the flaps were injected with Hartmann's solution or with urokinase and the percent survival of the flap was determined at 7 days following flap reperfusion. As the result, the flap survival rate was highest in the pressure injection of urokinase group.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.652-657
• /
• 2009

MPW(Magnetic Pulse Welding) is a technologies for welding of metals by means of repulsive force on account of the interaction between electro-magnetic field of coil and current induced in outer pipe. These MPW is one of the most useful welding process of welding ability of the dissimilar metal in which cylindrical materials, such as pipe, tube. As the quality of a weld joint is strongly influenced by process parameters during the welding process and the success of the welding to evaluated according to the leakage pressure. Generally, the process parameters is magnetic pressure, the gap between outer pipe and inner pipe, and the ratio of thickness to diameter of pipe(D/T) in MPW. Therefore, the goal of this study was to explain the effect of parameters on the weld joint leakage pressure. For these purposes, FFD(Fractional Factorial Design) were used for the experiment. The measured data were analyzed by regression analysis and verification experiments with random condition were conducted to confirm the suggested experimental model.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1990.10a
• /
• pp.97-110
• /
• 1990

This paper presents a case history of a deep open cut excavation of Nakagawa section for Futuoka Subway construction which adopted observational mettled against boiling failure and completed with success by modifying construction based upon field monitoring. One of the difficult conditions for the excavation was sandy layer with high water pressure which was anticipated boiling failure. The boiling was generally considered as one of the difficult phenomena to work with the observational method because of its unpredictable catastrophic nature. Laboratory experiments showed the existence of the prefailure movements of the ground and the possibility of the application of the observational method against the boiling failure. Construction step was planned to be modified, if necessary, based upon field monitoring and was completed with success.

• The Research Journal of the Costume Culture
• /
• v.8 no.1
• /
• pp.77-86
• /
• 2000

The purpose of this study is to identify the nature and trend of multinational corporations and to examine strategies for survival of local companies in newly-rising markets which stand against huge multinational corporations, through case study. This research has been done by the literature review of the articles, books and the case study. The results were as follow : First, if the pressure for the globalization of a industry is low and the possibility of overseas transfer of the competitive property of corporations are bare, the intensive strategy for the protection of a national market can be used against the invasion of a multinational corporations. Second, if the pressure for the globalization is still low and the retaining property can be transferred to abroad, a company can be expended to several foreign markets in the limited scope, using the success in a national market as a stepping-stone. Third, In case the pressure for the globalization is high and the competitive property of corporations are effective only in a national market, corporations can survive individually and continuously through the reorganization of corporation's property, which is the survival strategy against multinational corporations. Forth, if the pressure for the globalization is high and the property of corporations can be transferred to abroad, it is possible for corporations to compete with the multinational corporations confidently.

• Geomechanics and Engineering
• /
• v.24 no.3
• /
• pp.281-293
• /
• 2021

Uncertainties in geomechanical input parameters which mainly related to inappropriate data acquisition and estimation due to lack of sufficient calibration information, have led wellbore instability not yet to be fully understood or addressed. This paper demonstrates a workflow of employing Quantitative Risk Assessment technique, considering these uncertainties in terms of rock properties, pore pressure and in-situ stresses to makes it possible to survey not just the likelihood of accomplishing a desired level of wellbore stability at a specific mud pressure, but also the influence of the uncertainty in each input parameter on the wellbore stability. This probabilistic methodology in conjunction with Monte Carlo numerical modeling techniques was applied to a case study of a well. The response surfaces analysis provides a measure of the effects of uncertainties in each input parameter on the predicted mud pressure from three widely used failure criteria, thereby provides a key measurement for data acquisition in the future wells to reduce the uncertainty. The results pointed out that the mud pressure is tremendously sensitive to UCS and SHmax which emphasize the significance of reliable determinations of these two parameters for safe drilling. On the other hand, the predicted safe mud window from Mogi-Coulomb is the widest while the Hoek-Brown is the narrowest and comparing the anticipated collapse failures from the failure criteria and breakouts observations from caliper data, indicates that Hoek-Brown overestimate the minimum mud weight to avoid breakouts while Mogi-Coulomb criterion give better forecast according to real observations.

• Journal of Energy Engineering
• /
• v.14 no.1
• /
• pp.11-17
• /
• 2005

The purpose of this research is to develop the model of pressure drop per unit pipe length due to the turbulence modulations in particle-laden flows which can be applied to various fluid conditions. The wake behind a particle, particle size, loading ratio and density difference between two phases of particle-laden flow was considered. The frictional pressure drop was modeled with the force balance in control volume. The numerical results show good agreements with available experimental data and the model success-fully predicted the mechanism of the pressure drop in particle-laden flows.

• Journal of Biosystems Engineering
• /
• v.35 no.1
• /
• pp.21-30
• /
• 2010

This study was performed to develop an active tire pressure control system that can adjust tire pressure to the optimum level according to traveling and working condition of agricultural tractor. For the development of active tire pressure control system, pneumatic supplier, solenoid valve block including pneumatic supply line, infinite rotation type pneumatic supplier with rotary joint unit, tire pressure transceiver module and control algorithm were developed. Also, tire simulator was developed. Using this tire simulator, the feasibility of each part constructing actual system was tested by checking the performance. The average communication success ratio was 98.3% between tire pressure transmitter and receiver module according to the various tire rotational speed and data receipt position of receiver module. The communication performance of the developed transmitter and receiver module was very stable in any condition. The tire pressure control system was accomplished by using the proportional control algorithm in this study. Also tire pressure control performance of developed control system was analyzed by using the tire simulator. As a result of control performance analysis to the developed system, the developed control system took 307 seconds to inflate agricultural tractor's tire from 50 kPa to 180 kPa. In opposite case, it took 210 seconds. Also it was able to control the tire pressure accurately under ${\pm}0.9%$ (FS) in any condition.

• Journal of Chest Surgery
• /
• v.53 no.4
• /
• pp.205-210
• /
• 2020

Esophageal anastomotic leak is the most common and serious complication following esophagectomy. However, the standard treatment for anastomotic leaks remains unclear. Recently, endoscopic vacuum therapy has become an important non-surgical alternative treatment method for patients with esophageal anastomotic leak. This treatment involves the endoscopic placement of a sponge connected to a nasogastric tube into the defect cavity or lumen. Subsequently, continuous negative pressure is delivered to the cavity through the tube. Several studies have reported a treatment success rate of 80% to 100%. In this study, we review the mechanism of action, the method of performing the procedure, its safety and efficacy, and prognostic factors for failure of endoscopic vacuum therapy in the management of patients with anastomotic leak, and on this basis attempted to confirm the possibility of establishing a standardized treatment protocol using endoscopic vacuum therapy.