• 한국초전도ㆍ저온공학회논문지
• /
• 제5권2호
• /
• pp.51-57
• /
• 2003

This paper proposes a new oscillating flow model of the pressure drop through the regenerator under pulsating pressure. In this oscillating flow model. pressure drop is expressed by the amplitude and the phase angle with respect to the inlet mass flow rate. In order to generalize the oscillating flow model. non-dimensional parameters, which are Reynolds number, Valensi number, gas domain length ratio, oscillating flow friction factor and phase angle of pressure drop, are derived from the capillary tube model of the regenerator. Correlations for the oscillating flow friction factor and the phase angle are obtained from the experiments for the twill-square screen regenerators under various operating frequencies and inlet mass flow rates. The oscillating friction factor is a function of the Reynolds number alone and the phase angle of pressure drop is a function of the Valensi number and the gas domain length ratio. Experiment is also performed to examine the effect of the weave style of screen. Experimental data demonstrate the superiority of the oscillating flow model over the previous steady flow model.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2252-2258
• /
• 2000

In order to investigate the effect of nozzle on stress concentration in pressure vessels, three dimensional finite element analyses were performed. The results were compared with those for corresponding two dimensional axisymmetric finite element analyses. A three dimensional finite element model with a surface crack was also designed to evaluate the effect of internal pressure and heat transfer on crack face, and the resulting stress intensity factors from the finite element analyses were compared with those for ASME Sec. XI and Raju-Newman's stress intensity factor solution. As a result, the validity of currently available stress intensity factor solutions for a surface crack was reviewed in the presence of geometrical complexity, heat transfer and internal pressure.

• 한국해양환경ㆍ에너지학회지
• /
• 제17권1호
• /
• pp.8-12
• /
• 2014

감압증발장치는 압력을 감소시켜 물의 끓는점을 낮춰주는 원리를 이용한 것으로 온도를 높이는데 필요한 에너지 소모량을 줄일 수 있는 원리로 사용되고 있다. 즉, 온도와 압력의 상관관계 원리를 이용한 것이다. 감압증발장치를 이용하여 해수의 온도별 포화증기압을 적용하여 증발량 실험을 한 결과 $80^{\circ}C$, -40 cmHg의 경우가 가장 많은 증발량을 나타내었으며, 해수의 농도에 따른 인자 실험의 결과에서는 농도가 짙을수록 증발량이 많이 발생하는 것을 알 수 있었다. 또한 압력에 따른 인자 실험의 결과 낮은 압력에서 증발량이 증가하는 것을 알 수 있었다. 결과적으로 증발량의 중요인자는 농도가 큰 부분으로 작용하였으며 다음 요인은 온도로 나타났으며 마지막 요인으로 압력을 들 수 있었다. 본 실험을 통하여 감압증발장치를 이용한 담수화 조건을 확인 할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.105-111
• /
• 2000

A numerical study has been performed to obtain the heat transfer and pressure drop characteristics for shell-and-tube heat exchanger with various shapes of tubes. The Tubes have variation of Aspect Ratio, Pitch and Rotation. Results are presented as plots of Colburn j factor and friction factor f against Aspect Ratio, Pitch and Rotation. As Aspect Ratio increases, j factor and f factor decreases. As Pitch increases, j factor decreases. j/f have optimized Pitch for each Aspect Ratio. Accordingly, there is fitness of Aspect Ratio and Pitch fur most effective cases. The Rotation of tubes are of no meaning for both heat transfer and pressure drop.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권4호
• /
• pp.421-429
• /
• 1997

This study is theoretically examined the influences on the performance of diesel engine super¬charged by exhaust gas turbine with the change of excess air factor, admission ratio, total efficien¬cy of turbine and compressor, scavenging pressure ratio, and scavenging temperature. In this study, all calculations are carried out by computer, and the theoretical engine performance is com¬pared with the actual engine performance which is offered from engine manufacturer. Following results are acquired by this study. The mean effective pressure is increased with decrease of excess air factor or increase of scavenging pressure ratio. As the admission ratio or total efficiency of tur¬bine is increased, the mean effective pressure is increased but the specific fuel consumption is decreased. Mean calculation error compared with the actual engine performance is under 5 per¬cents, therefore, this calculation method can be used in the design of diesel engine.

• 대한기계학회논문집B
• /
• 제32권6호
• /
• pp.479-486
• /
• 2008

The objective of this study is to investigate experimentally the characteristics of pressure drop in SMX type motionless mixers. The motionless mixers used are SMX-O, SMX-H, SMXL-O and SMXL-H ones. The SMX-H and SMXL-H mixer elements have been designed to reduce the pressure drop as compared with the SMX-O and SMXL-O ones. The Reynolds number based on the bulk average properties of the water is in a range of 5000 to 13000. The pressure drops across the motionless mixers are measured and the friction factors are calculated using the pressure drop data. On the average, the friction factors of the SMX-H and SMXL-H mixers are about 8% and 15% lower than those of the SMX-O and SMXL-O ones. In addition, the proposed correlations from the experimental data for the friction factor are presented and compared with those obtained from the literature.

• Wind and Structures
• /
• 제30권3호
• /
• pp.219-229
• /
• 2020

Net pressures on roofs and walls of buildings are dependent on the internal and external pressure fluctuations. The variation of internal and external pressures are influenced by the size and location of the openings. The correlation of external and internal pressure influences the net pressures acting on cladding on different parts of the roof and walls. The peak internal and peak external pressures do not occur simultaneously, therefore, a reduction can be applied to the peak internal and external pressures to obtain a peak net pressure for cladding design. A 1:200 scale wind tunnel model study was conducted to determine the correlations of external and internal pressures and effective reduction to net pressures (i.e., net pressure factors, F_C) for roof and wall cladding. The results show that external and internal pressures on the windward roof and wall edges are well correlated. The largest ${\mathcal{C}}_{{\check{p},net}$, highest correlation coefficient and the highest F_C are obtained for different wind directions within 90° ≤ θ ≤ 135°, where the large openings are on the windward wall. The study also gives net pressure factors F_C for areas on the roof and wall cladding for nominally sealed buildings and the buildings with a large windward wall opening. These factors indicate that a 5% to 10% reduction to the action combination factor, K_C specified in AS/NZS 1170.2(2011) is possible for some critical design scenarios.

• 한국항공우주학회지
• /
• 제48권9호
• /
• pp.653-661
• /
• 2020

본 논문에서는 우주 발사체 추진제 탱크 구조인 등방성 격자 원통 구조의 경량 설계를 위하여 축 방향의 압축력과 내부 압력을 함께 고려하여 좌굴 Knockdown factor를 수치해석 연구를 통하여 새롭게 정립하였다. 등방성 격자 원통 구조의 유한요소 모델링 및 비선형 후좌굴 해석을 위하여 비선형 유한요소 해석 프로그램인 ABAQUS를 사용하였다. 본 연구 결과, 축 방향의 압축력과 500 kPa의 내부 압력을 함께 받는 등방성 격자 원통 구조의 전역 좌굴 하중 및 좌굴 Knockdown factor가 축 방향의 압축력만을 받는 원통 구조에 비해 각각 304% 및 53%만큼 증가하였다. 따라서 발사체 탱크 구조의 좌굴 설계 시, 내부 압력과 압축력을 함께 고려한 본 연구의 좌굴 Knockdown factor를 이용할 경우, 내부 압력을 고려하지 않은 설계에 비하여 경량 구조 설계가 가능함을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.58-67
• /
• 1996

In the present study, the pressure distribution, wall shear stress distribution and friction factor of developing turbulent pulsating flows are investigated theoretically and experimentally in the entrance region of a square duct. The pressure distribution for turbulent pulsating flows are in good agreement with the theoretical values. The time-averaged pressure gradients of the turbulent pulsating flows show the same tendency as those of turbulent steady flows as the time-averged Reynolds number $(Re_{ta})$ increase. Mean shear stresses in the turbulent pulsating flow increase more in the inlet flow region than in the fully developed flow region and approach to almost constant value in the fully developed flow region. In the turbulent pulsating flow, the friction factor of the quasi-steady state flow $({\lambda}_{q, tu})$ follow friction factor's law in turbulent steady flow. The entrance length of the turbulent pulsating flow is not influenced by the time-averaged Reynolds number $(Re_{ta})$ and it is about 40 times as large as the hydraulic diameter.

• Journal of Preventive Medicine and Public Health
• /
• 제32권4호
• /
• pp.513-525
• /
• 1999

Objectives : High-normal blood pressure' is a factor influencing decision to initiate targeted intensive intervention strategy in westernized populations. JNC-VI offered the vigorous lifestyle modification for persons with 'high-normal blood pressure', who could be early detected. As a hypertension seems to be the result of multiple genetic factors operating in concert with associated environmental factors, it will be necessary to identify the high-normal blood pressure as a risk factor of hypertension for applying primary prevention strategy in Korean people. Methods : Although cohort study design might be adequate to recruit incidence cases, to keep time sequence of events, and to prevent information bias, nested case-control study was chosen for avoiding measurement errors because hypertension is a benign disease. Source population was the 'Seoul Cohort' participants and follow-up was done by using Korea Medical Insurance Corporation's database on the utilization of health services from 1 Jan93 to 30Jun97. Incidence cases were ascertained through the chart review, telephone contacts, and direct blood pressure measurements. Controls included the pairing of 4 individuals to each case on the basis of age. Results : As 75% of 247 incident cases had high-normal blood pressure, the crude odds ratio for hypertension was 2.04 (95% CI 1.47-2.83). Another statistically significant risk factors of hypertension were body mass index, dietary fiber, alcohol consumption, weekly activity and history of quitting smoking. The multivariate odds ratio of high-normal blood pressure adjusted for all risk factors was 1.84 (95% CI 1.31-2.56). Among high-normal blood pressure group, body mass index, weekly ethanol amounts, weekly physical activity, and dietary fiber except history of quitting smoking were still risk factors of hypertension. Conclusion : 'High-normal blood pressure' is a risk factor for hypertension in Korean middle-aged men, which represents that the vigorous lifestyle modification for persons with 'high-normal blood pressure' is need.