• The Journal of the Petrological Society of Korea
• /
• v.17 no.1
• /
• pp.16-35
• /
• 2008

We study metamorphism of metasedimetary rocks and origin and evolution of leucogranite form Samcheok area, northeastern Yeongnam massif, South Korea. Metamorphic rocks in this area are composed of metasedimentary migmatite, biotite granitic gneiss and leucogranite. Metasedimentary rocks, which refer to major element feature of siliclastic sediment, are divided into two metamorphic zones based on mineral assemblages, garnet and sillimanite zones. According to petrogenetic grid of mineral assemblages, metamorhpic P-T conditions are $740{\sim}800^{\circ}C$ at $4.8{\sim}5.8\;kbar$ in the garnet zone and $640-760^{\circ}C$ at 2.5-4.5kbar in sillimanite zone. The leucogranite (Imwon leucogranite) is peraluminous granite which has high alumina index (A/CNK=1.31-1.93) and positive discriminant factor value (DF > 0). Thus, leucogranite is S-type granite generated from metasedimentary rocks. Major and trace element diagram ($R_1-R_2$ diagram and Rb vs. Y+Nb etc.) show collisional environment such as syn-collisional or volcanic arc granite. Because Rb/sr ratio (1.8-22.9) of leucogranites is higher than Sr/Ba ratio (0.21-0.79), leucogranite would be derived from muscovite dehydrate melting in metasedimentary rocks. Leucogranites have lower concentration of LREE and Eu and similar that of HREE relative to metasedimentary rocks. To examine difference of REEs between leucogranites and metasedimentary rocks, we perform modeling using volume percentage of a leucogranite and a metasedimenatry rock from study area and REE data of minerals from rhyolite (Nash and Crecraft, 1985) and melanosome of migmatite (Bea et al., 1994). Resultants of modeling indicate that LREE and HREE are controlled by monazites and garnet, respectively, although zircon is estimated HREE dominant in some leucogranite without garnet. Because there are many inclusions of accessary phases such as monazite and zircon in biotites from metasedimentary rocks. leucogranitic magma was mainly derived from muscovite-breakdown in metasedimenary rocks. Leucogranites can be subdivided into two types in compliance with Eu anomaly of chondrite nomalized REE pattern; the one of negative Eu anomaly is type I and the other is type II. Leucogranites have lower Eu concetnrations than that of metasedimenary rocks and similar that of both type. REE modeling suggest that this difference of Eu value is due to that of components of feldspars in both leucogranite and metasedimentary rock. The tendency of major ($K_2O$ and $Na_2O$) and face elements (Eu, Rb, Sr and Ba) of leucogranites also indicate that source magma of these two types was developed by anatexis experienced strong fractionation of alkali-feldspar. Conclusionally, leucogranites in this area are products of melts which was generated by muscovite-breakdown of metasedimenary rock in environment of continetal collision during high temperature/pressure metamorphism and then was fractionated and crystallized after extraction from source rock.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.404-415
• /
• 1998

Background: Sleep apnea syndrome, which occurs in 1~4 % of the adult population, frequently has different cardiovascular complications such as hypertension, ischemic heart disease, cardiac arrythmia as well as sleep-wake disorder such as excessive daytime hypersomnolence or insomnia. Mortality and vascular morbidity are reported to be significantly higher in sleep apnea syndrome patients than in normal population. According to the recent studies, autonomic dysfunction as well as hypoxemia, hypercapneic acidosis, and increased respiratory effort, may playa role in the high prevalence of cardiovascular complications in patients with sleep apnea syndrome. However the cause and mechanism of autonomic neuropathy in patients with sleep apnea syndrome are not well understood. We studied the existence of autonomic neuropathy in patients with sleep apnea syndrome and factors which influence the pathogenesis of autonomic neuropathy. Method: We used the cardiovascular autonomic neuropathy(CAN) test as a method for evaluation of autonomic neuropathy. The subjects of this study were 20 patients who diagnosed sleep apnea syndrome by polysomnography and 15 persons who were normal by polysomnography. Results: Body mass index and resting systolic blood pressure were higher in sleep apnea group than control group. Apnea index(Al), respiratory disturbance index(RDI) and snoring time percentage were significantly higher in sleep apnea group compared with control group. But there were no significant differences in saturation of oxygen and sleep efficiency in two groups. In the cardiac autonomic neuropathy test, the valsalva ratio was significantly low in sleep apnea group compared with control group but other tests had no differences between two groups. The CAN scores and corrected QT(QTc) interval were calculated significantly higher in sleep apnea group, but there were no significant correlations between CAN scores and QTc interval. There were no significant data of polysomnography to correlate to the CAN score. It meant that the autonomic neuropathy in patients with sleep apnea was affected by other multiple factors. Conclusion: The cardiovascular autonomic neuropathy test was a useful method for the evaluation of autonomic neuropathy in patients with sleep apnea syndrome and abnormalities of cardiovascular autonomic neuropathy were observed in patients with sleep apnea syndrome. However, we failed to define the factors that influence the pathogenesis of autonomic neuropathy of sleep apnea syndrome. This study warrants futher investigations in order to define the pathogenesis of autonomic neuropathy in patients with sleep apnea syndrome.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.5
• /
• pp.1047-1057
• /
• 1998

Background : Sarcoidosis is a systemic granulomatous disorder of unknown origin and characterized by accumulation of T cells and macrophages. Various cytokines may play crucial roles in the activation of T cells and macrophages, and thereby in the formation of granulomas. However, little is known about the balance between proinflammatory cytokines and antiinflammatory cytokines in the development of sarcoid granulomas and disease activities. In the present study, we measured IL-6, IL-8 and IL-10 in the bronchoalveolar lavage fluid(BALF) from patients with pulmonary sarcoidosis to find out whether there is an imbalance between proinflammatory cytokines and antiinflammatory cytokines in the lung. Methods: Fourteen subjects with the diagnosis of sarcoidosis and six healthy volunteers were included. BALF was concentrated ten-fold by pressure ultrafiltration and each cytokine levels were measured by EUSA method. Active sarcoidosis was defined by major organ involvement or clinically progressive diseases. Results: The mean IL-6 levels in the BALF of the active sarcoidosis group were significantly increased than in controls or inactive sarcoidosis group(p<0.05). Meanwhile, the IL-8 levels were increased and IL-10 levels were decreased in the active sarcoidosis group than in controls or inactive sarcoidosis group without significance(p>0.05). In active pulmonary sarcoidosis patients, the IL-6 levels in BALF correlated with the BALF CD4/CD8 ratio(r=0.768, p<0.05) and IL-8 levels(r=0.564, p<0.05). Conclusions : The data presented showed that pro-inflammatory cytokine IL-6 is important in the pathogenesis of sarcoidosis and decreased tendency of anti-inflammatory cytokine IL-10 might also be involved in the development of granulomatous inflammation in sarcoidosis.

• The Journal of the Petrological Society of Korea
• /
• v.6 no.1
• /
• pp.19-33
• /
• 1997

This study reports the results about the petrography and geochemical characteristics of 10 representative volacanic rocks. The Cretaceous volcanic rocks distributed in the vicinity of the Kageo island composed of andesitic rocks, dacitic welded tuff, and rhyolitic rocks in ascending order. Sedimentary rock is the basement in the study area covered with volcanic rocks. Andesitic rocks composed of pyroclastic volcanic breccia, lithic lapilli tuff and cryptocrystallin lava-flow. Most dacitic rocks are lapilli ash-flow welded tuff. Rhyolitic rocks consists of rhyolite tuff and rhyolite lava flow. Rhyolite tuff are lithic crystal ash-flow tuff and crystal vitric ash-flow tuff with somewhat accidental fragments of andesitic rocks, but dacitic rocks. The variation of major and trace element of the volcanic rocks show that contents of $Al_2O_3$, FeO, CaO, MgO, $TiO_2$ decrease with increasing of $SiO_2$. On the basis of Variation diagrams such as $Al_2O_3$ vs. CaO, Th/Yb vs. Ta/Yb, and $Ce_N/YB_N$ vs. $Ce_N$, these rocks represent mainly differentiation trend of calc-alkaline rock series. On the discriminant diagrams such as Ba/La and La/Th ratio, Rb vs. Y + Nb, the volcanic rocks in study area belongs to high-K Orogenic suites, with abundances of trace element and ternary diagram of K, Na, Ca. According to the tectonic discriminant diagram by Wood, these rocks falls into the diestructructive continental margin. K-Ar ages of whole rocks are from andesite to rhyolite $97.0{\pm}6.8~94.5{\pm}6.6,\68.9{\pm}4.8,\61.5{\pm}4.9~60.7{\pm}4.2$ Ma, repectively. Volcanic rocks in study area show well correlation to the Yucheon Group in terms of rock age dating and geochemcial data, and derived from andesitic calc-alkaline magma that undergone low pressure fractional crystallization dominated plagioclase at <30km.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.6
• /
• pp.346-361
• /
• 2013

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2012. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. The conclusions are as follows : (1) The research works on thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and valves, fuel cells and power plants, ground-coupled heat pumps, and general heat and mass transfer systems. Research issues are mainly focused on new and renewable energy systems, such as fuel cells, ocean thermal energy conversion power plants, and ground-coupled heat pump systems. (2) Research works on the heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, and industrial heat exchangers. Researches on heat transfer characteristics included the results for natural convection in a square enclosure with two hot circular cylinders, non-uniform grooved tube considering tube expansion, single-tube annular baffle system, broadcasting LED light with ion wind generator, mechanical property and microstructure of SA213 P92 boiler pipe steel, and flat plate using multiple tripping wires. In the area of pool boiling and condensing heat transfer, researches on the design of a micro-channel heat exchanger for a heat pump, numerical simulation of a heat pump evaporator considering the pressure drop in the distributor and capillary tubes, critical heat flux on a thermoexcel-E enhanced surface, and the performance of a fin-and-tube condenser with non-uniform air distribution and different tube types were actively carried out. In the area of industrial heat exchangers, researches on a plate heat exchanger type dehumidifier, fin-tube heat exchanger, an electric circuit transient analogy model in a vertical closed loop ground heat exchanger, heat transfer characteristics of a double skin window for plant factory, a regenerative heat exchanger depending on its porous structure, and various types of plate heat exchangers were performed. (3) In the field of refrigeration, various studies were executed to improve refrigeration system performance, and to evaluate the applicability of alternative refrigerants and new components. Various topics were presented in the area of refrigeration cycle. Research issues mainly focused on the enhancement of the system performance. In the alternative refrigerant area, studies on CO2, R32/R152a mixture, and R1234yf were performed. Studies on the design and performance analysis of various compressors and evaporator were executed. (4) In building mechanical system research fields, twenty-nine studies were conducted to achieve effective design of mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, renewable energy systems, and lighting systems in buildings. New designs and performance tests using numerical methods and experiments provide useful information and key data, which can improve the energy efficiency of buildings. (5) In the fields of the architectural environment, studies for various purposes, such as indoor environment, building energy, and renewable energy were performed. In particular, building energy-related researches and renewable energy systems have been mainly studied, reflecting interests in global climate change, and efforts to reduce building energy consumption by government and architectural specialists. In addition, many researches have been conducted regarding indoor environments.

• Journal of the Korean Vacuum Society
• /
• v.18 no.1
• /
• pp.66-72
• /
• 2009

The detection methods are required to monitor and diagnose the abnormality on the insulation condition inside a gas-insulated switchgear (GIS). Due to a good sensitivity to the products decomposed by partial discharges (PDs) in $SF_6$ gas, the development of a SWNT gas sensor is actively in progress. However, a few numerical studies on the diffusion mechanism of the $SF_6$ decomposition products by PD have been reported. In this study, we modeled $SF_6$ decomposition process in a chamber by calculating temperature, pressure and concentration of the decomposition products by using a commercial CFD program in conjunction with experimental data. It was assumed that the mass production rate and the generation temperature of the decomposition products were $5.04{\times}10^{-10}$ [g/s] and over 773 K respectively. To calculate the concentration equation, the Schmidt number was specified to get the diffusion coefficient functioned by viscosity and density of $SF_6$ gas instead rather than setting it directly. The results showed that the drive potential is governed mainly by the gradient of the decomposition concentration. A lower concentration of the decomposition products was observed as the sensors were placed more away from the discharge region. Also, the concentration increased by increasing the discharge time. By installing multiple sensors the location of PD is expected to be identified by monitoring the response time of the sensors, and the information should be very useful for the diagnosis and maintenance of GIS.

• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.196-209
• /
• 2009

Occurrences of sandstorms in the deserts and loess of Mongolia and northern China and associated dustfall episodes in the Korean Peninsula were monitored during the period January through December, 2005. False colour images were made by directly receiving the NOAA Advanced Very High Resolution Radiometer (AVHRR) data, and the distribution and transport of sandstorms were analyzed. The ground concentrations for PM10, PM2.5 and visibility of the dustfall episodes (PM10 concentration over $190{\mu}g\;m^{-3}$) were analyzed at Cheongwon, located midway in South Korea, and in the leeward direction of the place of origin of the sandstorms. Variations in the concentrations of $O_3,\;NO_2$, CO and $SO_2$ were also compared with dust concentrations in the dustfall episodes. Fewer occurrences of strong sandstorms in the place of origin were observed in 2005, due largely to the accumulation of snow and mild fluctuations of high and low pressure systems in the place of origin, thereby accounting for a low frequency of dustfall episodes in Korea, compared with those during the period 1997-2005. A total of 7 dustfall episodes were monitored in Korea in 2005 that lasted 11 days. In summer, sandstorms occurred less frequently in the source region in 2005 due to high humidity and milder winds, thereby causing no dustfall episodes in Korea. In case the sandstorms occurring at the place of source head directly to Korea without passing through large cities and industrial areas of China, the PM2.5 concentrations were measured at 20% or lower than the PM10 concentrations. However, when the sandstorms headed to Korea via the industrial areas of eastern China, where they pick up anthropogenic air pollutants, the PM2.5 concentrations were at least 25% higher of the PM10 concentrations. On the other hand, over 5 cases were observed and analyzed in 2005 where the PM10 concentrations of sand dust originating from the deserts were measured at $190{\mu}g\;m^{-3}$ or lower, falling short of the level of a dustfall episode.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.1
• /
• pp.18-29
• /
• 2010

Offshore subsurface storage of $CO_2$ is regarded as one of the most promising options to response severe climate change. Marine geological storage of $CO_2$ is to capture $CO_2$ from major point sources, to transport to the storage sites and to store $CO_2$ into the offshore subsurface geological structure such as the depleted gas reservoir and deep sea saline aquifer. Since 2005, we have developed relevant technologies for marine geological storage of $CO_2$. Those technologies include possible storage site surveys and basic designs for $CO_2$ transport and storage processes. To design a reliable $CO_2$ marine geological storage system, we devised a hypothetical scenario and used a numerical simulation tool to study its detailed processes. The process of transport $CO_2$ from the onshore capture sites to the offshore storage sites can be simulated with a thermodynamic equation of state. Before going to main calculation of process design, we compared and analyzed the relevant equation of states. To evaluate the predictive accuracies of the examined equation of states, we compare the results of numerical calculations with experimental reference data. Up to now, process design for this $CO_2$ marine geological storage has been carried out mainly on pure $CO_2$. Unfortunately the captured $CO_2$ mixture contains many impurities such as $N_2$, $O_2$, Ar, $H_{2}O$, $SO_{\chi}$, $H_{2}S$. A small amount of impurities can change the thermodynamic properties and then significantly affect the compression, purification and transport processes. This paper analyzes the major design parameters that are useful for constructing onshore and offshore $CO_2$ transport systems. On the basis of a parametric study of the hypothetical scenario, we suggest relevant variation ranges for the design parameters, particularly the flow rate, diameter, temperature, and pressure.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.1
• /
• pp.1-17
• /
• 2004

The purpose of this study is to investigate the actual condition of consciousness that the students in Dept. of dental hygiene who will be engaged in dental hygiene at a dental office in the future have about a clinical training, to see whether there is any difference between the results, and then to provide fundamental data which can be helpful to develop more effective clinical training programs. For this, we investigated consciousness, that 114 daytime school students and evening school students(76 daytime school students and 38 evening school students) in Dept. of dental hygiene in J college have, using questionnaires on clinical training with Self-Administrated Method. SPSS 12.0 for Windows was used to analyze all of the questionnaires, and the results analyzed at meaningful level a=.05 are like followings: 1. The degree of satisfaction on clinical training was high as average 3.30 ; it was high in case of night training as 3.34, and of a dental office in a general hospital and an university hospital as 3.83. The degree of stress caused by clinical training was high as average 3.30, and it means that they are under relatively heavy pressure ; it was shown they got the most heavy stress as 3.39 at night, as 3.68 at a dental clinic 2. The students showed the highest tendency to recognize that clinical training is needed "for learning various clinical case experiences" as average 3.54 ; the students trained at daytime showed the highest average 3.55, and at a clinical hospital, the highest average 3.64. 3. In the study on an actual condition of consciousness about clinical training according to class difference by time(at day time and at night), there is meaningful difference between two kinds of class ; the students trained at day time showed average 2.68 that they don't like to attend, on the other hand the students at night showed higher average 2.84(p<.05). In the study on an actual condition of consciousness about clinical training according to the institutions they are trained, there is meaningful difference at satisfaction on learning method and amount of assignment : they show the highest degree of satisfaction on the learning method in case of working at a dental office in a general hospital and an university hospital as average 3.3(p<.0.1) ; the amount of assignment was shown most high at a dental clinic and a dental office in a general hospital and an university hospital as average 3.00 each(p<.05). 4. In the study of the degree of satisfaction on the clinical training, it has relatively high connections with learning contents(r=.656), learning methods(r=.497), special lessons and supplementary lessons(r=.472), the case they don't like attend at work (r=-.439), discriminatory treatment(r=-.25l), respectability on the senior dental hygienists(r=.464), a social status of a dental hygienist(r=.213), the degree of satisfaction from the relationship with other dental hygienists(r=.274), the degree of understanding which clinical training institutions have on the trained students(r=.494), trainers' ability to teach the students(r=.499). enthusiasm on guiding (r=.523), the amount of assignment(r=.333). 5. In the study on stress they got from a clinical training, it has relatively high connections with learning contents(r=-.399). learning methods(r=-.536), comprehension on training program(r=-.208), special lessons and supplementary lessons(r=-.306), the case they don't like attend at work(r=.467), discriminatory treatment(r=.366), respectability on the senior dental hygienists(r=-.341), a social status of a dental hygienist(r=-.l97), the degree of satisfaction from the relationship with another dental hygienists(r=-.289), the degree of understanding which clinical training institutions have on the trained students(r=-.430), trainers' ability to teach the students(r=-.396), enthusiasm on guiding(r=-.495).

• Journal of radiological science and technology
• /
• v.36 no.1
• /
• pp.49-55
• /
• 2013

Currently, commercially available phantom can reproduce and evaluate only a static situation, the study is incomplete research on phantom and system which is can confirmed functional situation in the kidney by time through dynamic phantom and blood flow velocity, various difference according to the amount of radioactive. Therefore, through this study, it has produced the dynamic kidney phantom to reproduce images through the dynamic flow of the kidney, it desires to evaluate the usefulness of nuclear medicine imaging. The production of the kidney phantom was fabricated based on the normal adult kidney, in order to reproduce the dynamic situation based on the fabricated kidney phantom, in this study, it was applied the volume pump that can adjust the speed of blood flow, so it can be integrated continuously radioactive isotopes in the kidney by using $^{99m}Tc$-pertechnate. Used the radioactive isotope was supplied through the two pump. It was confirmed the changes according to the infusion rate, radioactive isotopes and the different injection speeds on the left and right, analysis of the acquired images was done by drawn five times ROI in order to check the reproducibility of each on the front and rear of the kidney and bladder. Depending on the speed of injection, radioisotope was a lot of integrated and emissions up when adjusting the pressure of the pump as 30 stroke, it was the least integrated and emissions up when adjusting as 40 stroke. The integration of the left & right kidney was not reached in the amount of the highest when adjusting as 10 stroke. In the changes according to the amount of the radioactive isotope, 0.6 mCi(22.2 MBq), 0.8 mCi (29.6 MBq)was showed up similar tendency but, in the result of the different injection 0.8 mCi, it was showed up counts close to double of 0.6 mCi. In the result of the differently injection speed of the left & right kidney, as a result of different conditions that injection speed was 20 stroke through left kidney phantom, the injection speed was 30 stroke through right kidney phantom, it was enough difference in the resulting image can be easily distinguished with the naked eye. Through this study, the results showed that the dynamic kidney phantom system is able to similarly reproduce renogram in the actual clinical practice. Especially, the depicted over time for the flow to be excreted through the kidney into the bladder was adequately reproduce, it is expected to be utilized as basic data to check the quality of the dynamic images. In addition, it is considered to help in the field of functional imaging and quality control.