• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.82-85
• /
• 2005

In order to see the effect of die deformation on the forming of sheet metal, the draw-ins, strains, and springbacks of an automotive fender panels are numerically simulated considering the die deformation found by the simultaneous structural analysis of press and dies. The comparison of the forming analysis result between the rigid die and the deformed die layout shows that the deformed tool provides more accurate forming and springback result.

• 한국정밀공학회지
• /
• 제21권7호
• /
• pp.153-162
• /
• 2004

This paper describes a research work on the die design for the deep drawing ＆ ironing(D.D.I.) of high pressure gas cylinder. D.D.I die set is large-sized die used in horizontal press, which is usually composed of drawing, and ironing die. Design method of D.D.I. die set is very different from those of conventional cold forging die set.. Out diameter of the die set is fixed because of press specification and out diameter of the insert should be as small as possible for saving cost of material. In this study, D.D.I die set has been designed to consider those characteristics and the feasibility of the designed die has been verified by FE-analysis. In addition, the automated system of die design has been developed in AutoCAD R14 by formulating the applied methods to the regular rules.

• Design & Manufacturing
• /
• 제10권3호
• /
• pp.46-50
• /
• 2016

Laminate products for motor core are developed with a structure in which the importance of quality level and clamping force is influenced by the recent performance and safety of the product. It has been confirmed that the accuracy of the mold is emphasized, and that the accuracy of the tightening force produced by the stacked product for the motor core is greatly influenced by the change in the bottom dead center displacement of the aged high speed press. The reason why setting the mold, and test the effect of bottom dead center of high speed press is to improve product pull force in embossing process at mold. We have applied the system to minimize the effect on the damping displacement under the dynamical degree of the equipment by applying the emboss complement device which can test the influence and complement in the process.

• 소성∙가공
• /
• 제23권4호
• /
• pp.206-210
• /
• 2014

The metal lead frame, a semiconductor component, has product tolerances in micro units as compared to products made with a larger size mold. Therefore, small deflections of the mold and of the press as well as the press molding process itself have a strong influence on accuracy of the product. Hence, it is necessary for the process design to consider the structural response of the mold and the press during deformation. In the current study, the mold deflection and pressure on the punch is examined using the finite element modeling (FEM) program ABAQUS. The results from the simulation were verified with the dynamic deformation measurement equipment using digital image correlation (DIC).

• 한국CDE학회논문집
• /
• 제14권5호
• /
• pp.314-322
• /
• 2009

In these days, automotive companies are trying to develop new manufacturing technologies and paradigms for rapid product development and production. The press die development process account for 40% of entire vehicle development process, and tryout process usually takes 3 to 4 months, and it is the biggest time portion out of dies manufacturing. Therefore, the effective tryout management system is essential to reduce time and cost of automotive press die production. This paper suggests improved process and practical application of tryout management using ubiquitous technology, and shows the results such as shorten time, improved quality and supporting of lifecycle engineering of press die.

• 산업공학
• /
• 제23권1호
• /
• pp.48-57
• /
• 2010

A tryout is one of the most important process in development and production of dies. For automotive press dies, it takes 3 to 4 months during the vehicle development process. Moreover, useful information and knowledge from tryout process is very important to design and production planning of dies. In this paper, we developed a new supporting system for making and managing tryout reports of an automotive press die. The CBDTS(Case-Based reasoning for Die Tryout report System) was developed and applied using case-based reasoning method in order to reduce time and manage knowledge of tryout. It consists of "Class Retrieval Wizard", "Case Cleansing Module", and "Case Viewer." Also, this CBDTS could be a channel to integrate field information with enterprise-wide information management systems as well. The CBDTS was applied to a Korean automotive press die shop, and the results were very satisfied in both quantitative and qualitative manners.

• 한국자기학회지
• /
• 제7권1호
• /
• pp.49-54
• /
• 1997

급속응고된 (N $d_{14.73}$F $e_{78.67}$ $B_{6.60}$)$_{100-x}$ $Co_{x}$(X = 0, 1, 2, 3)리본의 열처리 온도에 따른 자기적 특성, 상변화, 미세조직의 변화에 대해 연구하였다. Co의 첨가로 인해 N $d_{2}$F $e_{14}$B 상의 결정입도가 균일해졌으며, Nd-rich 상들이 입계에 잘 분포됨으로써 보자력($_{i}$ $H_{c}$)이 향상되어 X=2에서 최대 20.3 kOe를 얻었다. 이와 같은 미량의 Co에 의한 보자력 향상의 효과는 고온성형을 요하는 hot-press 및 die-upset에서도 동일하게 나타났으며 최대의 보자력은 X=2에서 hot press시에 16.9 kOe, die-upset 시에 15.12 kOe 이다.

• 소성∙가공
• /
• 제22권2호
• /
• pp.101-107
• /
• 2013

The heat transfer characteristics between die and sheet and die and coolant are important parameters in hot press forming process. The determination of the quenching time that guarantees full martensitic transformation requires proper understanding of these heat transfer characteristics. The contact area changes drastically during the quenching process due to volume changes of both die and sheet by temperature drop as well as phase transformation. Several types of modeling techniques are tested in order to select the most suitable. The effect of quenching time as well as die heat conductivity on martensitic transformation is investigated and predictions are compared to experimental results.

• 소성∙가공
• /
• 제19권7호
• /
• pp.399-404
• /
• 2010

We propose an analysis model for simulating the detailed procedure of pore closing in open die forging of shafts. In the analysis model, an artificial symmetric plane is used, on which initial pores are located to be traced. The analysis model is employed to carry out three-dimensional simulation of pore closing in shaft free forging by both conventional free forging press and radial forging machine. With this result, two typical types of free forging equipment for manufacture of shafts are compared in detail. It has shown that the radial forging machine is much superior to the conventional open die forging press especially in pore closing under high hydrostatic pressure with sound strain.

• 소성∙가공
• /
• 제18권1호
• /
• pp.13-19
• /
• 2009

In the recent years, the production of light-weight products has become important because of increasing demands for the energy savings through weight reduction. Therefore the advanced manufacturing technology with Al alloy is continuously required in many industrial fields. Bending characteristics of Al rectangular tube with hollow and solid section has been analyzed by FE analysis in press bending with wing-die. Bending stress is affected by punch stroke and rotation of wing-die. There were different sectional sagging characteristics between the solid rectangle section and the hollow rectangle section.