• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.166-170
• /
• 2003

This paper presents the TTFC(Two Transistor Forward Converter) using Synchronous Rectifier of Compulsory Control-driver. The two transistor forward circuit is used to decrease voltage stress of primary side and the synchronous rectifier is used to reduce current stress of secondary side. Previous synchronous rectifier's MOSFET of TTFC have long dead time This paper presents synchronous rectifier of compulsory control-driver for minimized dead time. This paper compared with diode rectifier, self-driven synchronous rectifier and compulsory control-driver synchronous rectifier of TTFC. The principle of operation, feature and design considerations are illustrated and verified through the experiment with a 200W 100kHz MOSFET based experimental circuit.

• 조명전기설비학회논문지
• /
• 제13권3호
• /
• pp.17-24
• /
• 1999

본 연구는 스피터와 마이크폰쌍을 이용하여 변압기 소음 감소를 위한 적응 능동소음제어에 있어서 스피커-증폭기-마이크로폰 경로와 스피거-마이크로폰 쌍의 동특성에 대한 이론적인 내용과 시뮬레이션을 통하여 이를 확인하였다. 또한 음향경로 내에 존재하는 마이크로폰-스피커 쌍의 전달함수를 SLS(sequential least square)알고리즘으로 추정하였으며, 추정된 전달함수에 대한 identify는 z 평면에서 안정된 극점과 영점을 갖고 있음을 확인하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.208-211
• /
• 1993

This paper presents the parameter design method for the desired time response of hydraulic track motor system of an industrial excavator. The dynamic response depends upon many component parameters such as motor displacement, spring constant and various valve coefficients. Most of them are to be determined to obtain the desired response while some parameters are fixed, or discrete for the off-the-shelf type components. The parameters might be selected through repeated simulations of the system once the system is mathematically represented. This paper, however, presents optimization technique to select two parameters using a parameter optimization technique. The variational approach is applied to the system equations which are represented as state equations and from those system equations derived are the adjoint equations. The gradients for each parameter also are formed for the iterations.

• 산업경영시스템학회지
• /
• 제19권40호
• /
• pp.169-178
• /
• 1996

Geographically dispersed computing system is made of computers interconnected by a telecommunications network. To make the system operated efficiently, system designer must determine the allocation of data files to each node. In designing such distributed computing system, the most important issue is the determination of the numbers and the locations where database files are allocated. This is commonly referred to as the file allocation problem (FAP)[3]. The proposed model is a 0/l integer programming problem minimizing the sum of file storage costs and communication(query and update) costs. File allocation problem belongs to the class of NP-Complete problems. Because of the complexity, it is hard to solve. So, this paper presents an efficient heuristic algorithm to solve the file allocation problem using Tabu Search Technique. By comparing the optimal solutions with the heuristic solutions, it is believed that the proposed heuristic algorithm gives good solutions. Through the experimentation of various starting points and tabu restrictions, this paper presents fast and efficient method to solve the file allocation problem in the distributed computing system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권4호
• /
• pp.242-248
• /
• 2007

This paper analyzes on the chaos characteristics of the chaotic neural networks and presents the convergence condition. Although the transient chaos of neural network sould be beneficial to overcome the local minimum problem and speed up the learning, the permanent chaotic response gives adverse effect on optimization problems and makes neural network unstable in general. This paper investigates the dynamic characteristics of the chaotic neural networks with the chaotic dynamic neuron, and presents the convergence condition for stabilizing the chaotic neural networks.

• 한국초전도ㆍ저온공학회논문지
• /
• 제6권3호
• /
• pp.1-5
• /
• 2004

This paper presents a study on the stability of bare and cu-laminated YBCO-coated conductor. we investigate the characteristics of quench/recovery behavior of YBCO test samples. bare and copper-laminated, by subjecting each test sample. immersed in a bath of liquid nitrogen boiling at 77.3 K. to a transport current pulse superimposed to a baseline DC current of 90-95% the critical current. The current pulse has an amplitude up to ∼4.5 times the critical current and a duration of 300 ms. This paper presents both experimental and simulation results.

• 디지털산업정보학회논문지
• /
• 제5권2호
• /
• pp.1-11
• /
• 2009

This study presents HCWS algorithm for researcher grouping on a weighted researcher network. The weights represent intensity of connections among researchers based on the number of co-authors and the number of co-authored research papers. To confirm the validity of the proposed technique, this study conducted an experimentation on about 80 research papers. As a consequence, it is proved that HCWS algorithm is able to bring about more realistic clustering compared with HCS algorithm which presents semantic relations among researchers in simple connections. In addition, it is found that HCWS algorithm can address the problems of existing HCS algorithm; researchers are disconnected since their connections are classified as weak even though they are strong, and vise versa. The technique described in this research paper can be applied to efficiently establish social networks of researchers considering relations such as collaboration histories among researchers or to create communities of researchers.

• 소음진동
• /
• 제10권3호
• /
• pp.480-485
• /
• 2000

This paper presents the application of the substrctural analysis based on the frequency responses for the prediction of the interior noise in a car. The complex trimmed body with the high modal density is presented by the experimental data. Finite element model presents the powertrain and its subframes with the lower modal density. The substructural analysis based on the frequency responses combines the frequency response functions from the numerical analysis and the experiments. It describes the interior noise successwfully. Using this method we can pick up the most dominant paths for the booming noise and predict the effects of the design changes easily.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권5호
• /
• pp.34-40
• /
• 2003

This paper presents the inertial force problem of ultrahigh-speed injection molding machine using linear motors, and presents its solutions. To make very thin products by injection molding, very high injection speed is required, and linear motors are used for this purpose. However, direct drive by linear motors may cause brief nozzle separation from the sprue bushing because of the inertia force which is as large as the total output thrust of the linear motors, and this momentary separation can cause molten plastic to leak. In this paper, two solutions are proposed for this inertia force problem. One is the mechanical cancellation of the inertia force, and the other is to increase the nozzle contact force. With the latter solution, the stationary platen bending worsens, so a new nozzle contact mechanism is also proposed, which can prevent the stationary platen bending.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1040-1044
• /
• 2005

This paper presents a method for the robot localization and calibration using the ultrasonic and the radio frequency. The distance between the receiver and a beacon can be computed by using the difference between times of flight. The presented method uses the gradient of the maximum amplitude of the ultrasonic in order to measure the time of flight precisely. The measured three distances between the receiver and the beacon are used to compute the robot position by the direct inverse method and the iterated least square approximation method. This paper is defined the calibration as the problem to find the location of 3 beacons and 3 robots, and presents 3 methods for it and found the 2B2R method as the best among them.