• The Journal of the Korean dental association
• /
• v.48 no.3
• /
• pp.196-204
• /
• 2010

To establish the ideal occlusal relationship, the values of tooth size and ratio must be in a normal range. In this study, the means and standard deviations of Bolton's anterior ratio and overall ratio using mesiodistal dimensions of teeth measured on diagnostic models of 334 Korean malocclusion patients were calculated and differences in Bolton ratio according to the groups of malocclusion patients were studied. Also the changes that can occur in overall ratio before and after hypothetical tooth extractions were observed. The results are as follows. 1. The mean anterior ratio of Korean malocclusion patients was $78.0\;{\pm}\;2.69%$, and the mean overall ratio was $91.56\;{\pm}\;2.28%$. 2. The largest value of tooth size ratio could be found in Class III group, followed by Class I and Class II groups in order. However there was no statically significant difference. 3. The values of overall ratio reduced significantly after premolar extractions in all malocclusion groups, which was much more significant in the extraction of upper second premolar and lower first premolar(U5L4) or upper second premolar and lower second premolar(U5L5). 4. The values of overall ratio reduced significantly after premolar extractions in all 3 groups divided based on Bolton ratio, which was much more significant in the extraction of upper second premolar and lower first premolar(U5L4) or upper second premolar and lower second premolar(U5L5).

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.501-511
• /
• 1995

The purpose of this study was to evaluate the position and shape of mental foramen in periapical radiographs. For this study, periapical radiographs of premolar areas were obtained from the 200 adults. Accordingly, the positional and shape changes of mental foramen were evaluated. The authors obtained radiographs according to changes in radiation beam direction in periapical radiographs of premolar areas, and then evaluated the positional and shape changes of mental foramen. The following results were obtained: 1. Shapes of mental foramen were observed elliptical(34.3％), round or oval(28.0％), unidentified(25.5％) and diffuse(12.2％) type in descending order of frequency. 2. Horizontal positions of mental foramen were most frequently observed at the 2nd premolar area(55.3％), the area between the 1st premolar and 2nd premolar(39.6％), the area between the 2nd premolar and 1st molar(3.4％), the 1st premolar area(1.0％), the area between the canine and 1st premolar(0.7％) in descending order of frequency. 3. Vertical positions of mental foramen were most frequently observed at the inferior to apex(67.1％), and at apex(24.8％), overlap with apex(6.4％), superior to apex(1.7％) in descending order of frequency. 4. Shapes of mental foramen were more obviously observed at the upward 10° positioned periapical radiographs. And according to the changes of horizontal and vertical position, they were observed similar to normally positioned periapical radiographs.

• The korean journal of orthodontics
• /
• v.24 no.4 s.47
• /
• pp.819-826
• /
• 1994

This study was designed to get the knowledges of the ideal arch form of the class I malocclusion patients of Koreans with first premolar extraction. The subjects consisted of 98 individuals with class I malocclusion with first premolar extraction. The results were as follows ; 1 Author found the ideal arch shape of the class I malocclusion patients with first premolar extraction. 2. Equations of ideal arch form of the class I malocclusion patients with first premolar extraction were obtained from SPSS.

• The korean journal of orthodontics
• /
• v.23 no.1 s.40
• /
• pp.47-55
• /
• 1993

This study was designed to recognize the factors which can affect the normal eruption of the lower third molar and the eruption rate of the lower third molar in the cases of non-extraction and the extraction of first premolar. The sample consisted of 214 cases of extraction of first premolar and 119 cases of non-extraction, and all of these cases were divided into erupted and impacted lower third molar groups and were analized according to the pantomogram. The results of the study were as follows : 1. The eruption rate of the touter third molar was $54.67\%$ in the group of extraction of the first premolar and $35.29\%$ in the non-extraction group. 2. The early inclination of the erupting lower third molar has significant effect in the eruption of it. 3. In the orthodontic treatment, the extraction of first premolar is one of the factors infuencing the nomal eruption of lower third molar. 4. The available space for the normal enruption of lower third molar was greater in first premolar extraction case than in non-extraction case.

• Journal of Oral Medicine and Pain
• /
• v.6 no.1
• /
• pp.5-8
• /
• 1981

The author had sellected stone models of upper premolar teeth from 20 age to 60 ages in male, and studied the attrition pattern of upper premolar teeth having attention to teeth cups on the stone model. All of the attrition patterns were divided (into) 14 forms. The results were as follows : 1. Attrition patterns of upper premolar teeth were divided into 14 forms. 2. Being compared with age group, early attrition pattern (M) showed decreasing tendency and late attrition pattern (A) showed incresing tendency by aging.

• The Journal of the Korean dental association
• /
• v.12 no.10
• /
• pp.747-751
• /
• 1974

The authors had a case of large periodontal cyst treated by Apicoectomies in 32 year old, Korean female. 1. A large periodontal cyst revealed big size in Maxilla, left side. 2. The authors have treated the periodontal cyst by means of the apicoectomies of the involved left lateral incisor, canine, 1st premolar and 2nd premolar teeth, maxilla. 3. Radiographic examination revealed a large radiolucent lesion 2.7 3.7cm in diameter, in the midline area, with involvement of the lateral incisor, canine, 1st premolar and 2nd premolar teeth, maxilla.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.1
• /
• pp.101-124
• /
• 1996

In this study, we designed the finite element models of mandible with varying their connecting types between the prosthesis on implant fixture and 2nd premolar, which were free-standing case(Mf), precision attachment case(Mp), semiprecision attachment case(Ms) and telescopic case(Mt). The basic model of the designed finite element models, which contained a canine and the 1st & 2nd premolar, was implanted in the edentulous site of the 1st & 2nd molar by two implant fixtures. We applied the load in all models by two ways. A vertical load of 200N was applied at each central fossa of 2nd premolar and 1st implant. A tilting load of 20N with inclination of $45^{\circ}$ to lingual side was applied to buccal cusp tips of each 2nd premolar and 1st implant. And then we analyzed three-dimensional finite element models, making a comparative study of principal stress and displacement in four cases respectively. Three-dimensional finite element analysis was performed for the stress distribution and the displacement using commercial software(IDEAS program) for SUN-SPARC workstation. The results were as follows : 1 Under vertical load or tilting load, maximum displacement appeared at the 2nd premolar. Semiprecision case showed the largest maximum displacement, and maximum displacement reduced in the order of precision attachment, free-standing and telescopic case. 2. Under vertical load. the pattern of displacement of the 1st implant appeared mesio-inclined because of the 2nd implant splinted together. But displacement pattern of the 2nd premolar varied according to their connection type with prosthesis. The 2nd premolar showed a little mesio-inclined vertical displacement in case of free-standing and disto-inclined vertical displacement due to attachment in case of precision and semiprecision attachment. In telescopic case, the largest mesio-inclined vertical displacement has been shown, so, the 1st premolar leaned mesial side. 3. Under tilting load, The pattern of displacement was similar in all four cases which appeared displaced to lingual side. But, the maximum displacement of 2nd premolar appeared larger than that of the first implant. Therefore, there was large discrepancy in displacement between natural tooth and implant during tilting load. 4. Under vertical load, the maximum compressive stress appeared at the 1st implant's neck. Semiprecision attachment case showed the largest maximum compressive stress, and the maximum compressive stress reduced in the order of precision attachment, telescopic and free-standing case. 5 Under vertical load, the maximum tensile stress appeared at the 2nd implant's distal neck. Semiprecision attachment case showed the largest maximum tensile stress, and the maximum tensile stress reduced in the order of precision attachment, telescopic and free-standing case. 6. Under vertical load or tilting load, principal stress appeared little between natural tooth & implant in free-standing case, but large principal stress was distributed at upper crown and distal contact site of the 2nd premolar in telescopic case. Principal stress appeared large at keyway & around keyway of distal contact site of the 2nd premolar in precision and semiprecision attachment case, appearing more broad and homogeneous in precision attachment case than in semiprecision attachment case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.6
• /
• pp.432-439
• /
• 2012

Purpose: The aim of this study was to investigate the blood supply to the maxillary sinus in Koreans using computed tomography of the lateral wall of the sinus, and to analyze the data according to demographic data, and to compare our results with previously published research. Methods: One hundred and three patients (males 51, females 52) who visited the dental clinic were evaluated. We investigated the canals with cone-beam computed tomography, and measured the diameter and length from the bony notch of the vascular canal at the lateral wall of the sinus to each of the reference planes. Results: Most types of vascular canal were type I & II (total 72.2%) which were driving through inside the sinus wall. Type IV, V were frequently investigated in 1st premolar and 2nd molar. Mean height; from anterior nasal spine-posterior nasal spine plane to vascular canal was 5.56 mm in 1st premolar, 2.11 mm in 2nd premolar, 0.98 mm in 1st molar, 4.32 mm in 2nd molar; from the basal layer of the sinus was 4.93 mm in 1st premolar, 5.00 mm in 2nd premolar, 6.05 mm in 1st molar, 7.91 mm in 2nd molar; and from alveolar crest, 20.80 mm in 1st premolar, 16.57 mm in 2nd premolar, 14.01 mm in 1st molar, 16.17 mm in 2nd molar. The mean height of the vascular canal of each reference plane showed no significant difference between sex, site (left or right) and age. The mean diameters of the canals were 1.76 mm in male, and 1.50 mm in female. Diameter decreased with age, and tooth site (from 1st premolar to 2nd molar). Conclusion: These results show that the mean diameter of the vascular canal of the maxillary sinus varies according to age, sex, and tooth site, but that the mean height of canal had no significant difference based on these three factors.

• The Journal of Korean Academy of Prosthodontics
• /
• v.8 no.1
• /
• pp.30-36
• /
• 1968

The measurements on the various items, such as arch form, kinds of anterior dental arch, degree of curvature in anterior dental arches, relationship between direction of the disto-incisal edge of the canine and first premolar, and kinds of posterior dental arch in upper dental arches were studied on 311 cases of the Korean adults aged from 20 to 30years. The results were as follows. 1. The commonest type of the upper dental arches was U-type (53.7%), the remaining were O-type (25.4%) and V-type (20.0%). 2. A slight curvature type (71.87%) prevailed against angulated curvature type in upper anterior dental arches. 3. The degree of curvature from $121^{\circ}$ to $160^{\circ}$ in anterior dental arches was common, and the degree of curve of 1-type with on curvature was smaller than 4, 5 type with two curvature. 4. The direction of the disto-incisal edge of canine went between the tip of the buccal cusp and the lingual incline of the buccal cusp of the first premolar in most dental arches and went lingual incline of the buccal cusp of the first premolar in U-type, from buccal cusp to lingual cusp of the first premolar in O-type and were distributed from buccal edge to central groove of the first premolar in V-type. 5. A posterior dental arch with almost straight curvature was common in 60.87%, and 4-type with a half rounded curve from first premolar to second molar was next.

• Imaging Science in Dentistry
• /
• v.31 no.3
• /
• pp.129-133
• /
• 2001

Purpose: To compare the copper equivalent values measured at premolar and molar areas in the copper equivalent images of panoramic and intraoral radiographs and to evaluate the possibility of the copper equivalent images of panorama for the assessment the bone density. Materials and Methods : Intraoral radiograms at mandibular premolar and molar area and panoramas of 6 human dry skulls were taken with copper-step wedge by Heliodent MD (Siemens Co., Germany) and by Planmeca (PM 2002 CC, Planmeca, Helsinki, Finland) were used for experiment. The copper equivalent values measured at premolar and molar areas in the copper equivalent im ages of panorama and intraoral film were compared. Results: The copper equivalent values were ranged 0.20 mmCu-0.44 mmCu at the molar areas, 0.05 mmCu-0.31 mmCu at the premolar areas on panoramic images. There were no significant differences (p>0.5) between the copper equivalent values on intraoral images and those on panoramic images measured at premolar areas and molar areas respectively. The correlation coefficient between the copper equivalent values on intraoral images and those on panoramic images was respectively 0.8495 at molar areas and 0.6184 at premolar areas. Conclusions : The copper equivalent images of panorama for the assessment the bone density appeared to be significant at molar area compared with the one of intraoral radiograph.