• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.194-196
• /
• 2021

This focuses on the Cultivation Plan Service at the preliminary production phase is critical in that it supports agricultural producers' decision by providing related information such as predicted crop production or expected profits for consulting or other agricultural information when they plan to cultivate. This paper describes the reference architecture of the farming sector will benefit immensely from the implementation of farming data in farming contents repository which will serve as the knowledge base for the Cultivation Plan Service at the pre-production stage based on Big data analysis.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.380-386
• /
• 2017

Fennovoima's nuclear power plant, Hanhikivi 1, $Pyh{\ddot{a}}joki$, Finland, is currently in design phase, and its construction is scheduled to begin in 2018 and electricity production in 2024. The objective of this paper is to produce a preliminary list of safety-significant external event combinations including preliminary probability estimates, to be used in the probabilistic risk assessment of Hanhikivi 1 plant. Starting from the list of relevant single events, the relevant event combinations are identified based on seasonal variation, preconditions related to different events, and dependencies (fundamental and cascade type) between events. Using this method yields 30 relevant event combinations of two events for the Hanhikivi site. The preliminary probability of each combination is evaluated, and event combinations with extremely low probability are excluded from further analysis. Event combinations of three or more events are identified by adding possible events to the remaining combinations of two events. Finally, 10 relevant combinations of two events and three relevant combinations of three events remain. The results shall be considered preliminary and will be updated after evaluating more detailed effects of different events on plant safety.

• Journal of the Korean Society of Systems Engineering
• /
• v.4 no.1
• /
• pp.31-34
• /
• 2008

As a supply contract for 100 new high-speed rolling stocks(KTX-II) was made 8th June 2006, System Engineering process has been applied to introduce the high-speed rolling stocks successfully and to manage the total life cycle systematically from Pre-concept Phase, Contract Phase, Preliminary and Critical Design Review, Production, Test and Verification, Acceptance and Operation to assurance for a flaw.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.1
• /
• pp.132-146
• /
• 2013

For several decades, Asian nations such as Korea, Japan and China have been leading the shipbuilding industry since the decline in Europe and America. However, several developing countries such as India, Brazil, etc. are going to make an entrance into the shipbuilding industry. These developing countries are finding technical partners or information providers because they are in situation of little experiences and technologies. Now, the shipbuilding engineering companies of shipbuilding advanced countries are getting a chance of engineering business against those developing countries. The starting point of this business model is green field project for the construction of new shipyard. This business model is started with a design of the shipyard layout. For the conducting of the shipyard layout design, four kinds of engineering parts are required. Those are civil engineering, building engineering, utility engineering and production layout engineering. Among these parts, production layout engineering is most important because its result is the foundation of the other engineering parts and it determines the shipyard capacity during the shipyard operation lifecycle. Previous researches about the shipyard layout design are out of the range from the business requirements because most research cases are in the tower of ivory, which means that there are little consideration of real ship and shipbuilding operation. In this paper, a shipyard layout design for preliminary phase is conducted for the target of newly planned shipyard at Venezuela of South America with an integrated method that is capable of dealing with actual master data from the shipyard. The layout design method of this paper is differentiated from the previous researches in that the actual product data from the target ship and the actual shipbuilding operation data are used for the required area estimation.

• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.279-290
• /
• 2014

Purpose: The purpose of this study is to propose adoption of QFD and Stage-gate in order to analyze the quality of korea defense system. Methods: Drawing change data of initial production phase in korea defense system were anlayzed and a practical method was proposed. Results: The results of this study are as follows; Off line Quality Control should be introduced in development phase. Specially, in case of defense system, the best method is QFD(Quality Function Deployment) and Stage-gate process. At first, QFD 1 step defines product planning from VOC(Voice Of Customer), QFD 2 step specifies part planning from product planning, QFD 3 step defines process planning from part planning, QFD 4 step defines production planning from previous process planning. Secondly, Stage-gate process is adopted. This study is proposed 5 stage-gate in case of korea defense development. Gate 1 is located after SFR(System Function Review), Gate 2 is located after PDR(Preliminary Design Review), Gate 3 is located after CDR(Critical Design Review), Gate 4 is located after TRR(Test Readiness Review) and Gate 5 is located before specification documentation submission. Conclusion: Off line QC(Quality Control) in development phase is necessary prior to on line QC(Quality Control) in p roduction phase. For the purpose of off line quality control, QFD(Quality Function Deployment) and Stage-gate process can be adopted.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.3
• /
• pp.265-270
• /
• 2004

Experiment study on a down scaled two-phase catalytic reactor is presented. As a preliminary step for the development of catalytic reactor, nano-particulate catalyst was prepared. Perovskite La$\_$0.8/Sr$\_$0.2/CoO$_3$is chosen and synthesized as a catalyst considering superior catalytic performance in reduction and oxidation process where oxygen is involved among the reagent. Reactor that has a scale of 2${\times}$10${\times}$25mm was made by machining of A1 block as a layered structure considering further extension to micro-machining. Hydrogen peroxide of 70wt% was adopted as reactant and was provided to the reactor loaded with 1.5 g of catalyst. Reactant flow rate was varied by precision pump with a range of 0.15cc/min to 17.2cc/min. Temperature distribution within reactor was recorded by 3 thermocouples and total amount of liquid product was measured. Temperature distribution and factors that affect temperature were observed and relation between temperature distribution and production rate was also analyzed. Relative time scale plays a significant role in the performance of the reactor. To obtain steady state operation, appropriate ratio of flow rate, catalyst mass and reactor geometry is required and furthermore to get more efficient production rate temperature distribution should be evenly distributed. The database obtained by the experiment will be used as a design parameter for micro reactor.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.633-637
• /
• 2001

Oil fly ash is known as one source of raw materials from which vanadium and nickel metals can be recovered. The current recovery process of valuable metals from oil fly ash is mainly the hydrormetallurgy one. Nevertheless, a great amount about 50~80%, of unburned carbon remains as byproduct after hydrormetallursy process. In Taiwan, if hydrormetallursy processes have proceeded, it can be estimated that the annual production of unburned carbon is 25 thousand tons. From the viewpoint of resource recycling, this study is a preliminary study and investigates in recovery of sub micron- graphitized carbon from unburned carbon by a designed process. The designed process included the following steps: 1.selecting a portion with +400mesh size from unburned carbon; 2.treating the selected in ultrasonic waves; 3.using a 400mesh sieve to obtain the product which is under 400mesh; 4.Removal ash from the product. In regard to treatment by ultrasonic waves in the designed process, treating time of ultrasonic waves is a simple and only variance in this study. The results indicate that the production yields increase with the treating time of ultrasonic waves; the production yield in specific conditions of this study can reach about 23%, in which ash content in product is about 2.5%. According to results of SEM, TEM and XRD, the products from the designed process are flakes in shape, several microns in size and graphitized carbon in carbon crystal phase. Except to graphitized carbon, there are a little carbon blacks, which are graphite 2H in carbon crystal phase in the products. Conclusively, the designed process is possibly applicable, by which comes to the recovery of micron- graphitized carbon.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.1
• /
• pp.38-60
• /
• 1999

The main objective of this study is systemization of the technique of ROC quantification and optimization of baseline design by applying CE principle to the acquisition process of a weapon system. QFD and TOA techniques can be employed to a good working example of the conceptual design of a future main battle tank. In this paper, Product Planning Phase, the first phase of four QFD phases, is deployed in terms of eight steps including customer requirements and final product control characteristics. TOA is carried out considering only combat weight. In order to perform combat weight analysis and performance TOA, Preliminary Configuration Synthesis Methodology is used. Preliminary Configuration Synthesis Methodology employs the method of least squares and described linear equations of weight interrelation equation for each component of tank. As a result of QFD based upon the ROC, it was cleared that armor piercing power, main armament, type of ammunition, cruising range, combat weight, armor protection, power loading, threat detection and cost are primary factors influencing design and that combat weight is the most dominant one. The results of TOA based on the combat weight constraint show that 5100 lb reduction was required to satisfy the ROC. The baseline design of a future main battle tank is illustrated with assumption that all phases of QFD are employed to development and production process of subsystems, components, and parts of main battle tank. TOA is applied in iterative process between initial baseline design and ROC. The detailed design of each component is illustrated for a future main battle tank.

• Proceedings of the ESK Conference
• /
• 1997.04a
• /
• pp.212-226
• /
• 1997

Industrial design aiming the mutual benefit of both user and manufacturer demands grasping and analyzing the needa and wants of consumer for the establishrment of the optimum plan and production by attribute oriented approach. Inspite of its usefulness, however, it might be impossible to help industrial designers to develop a new product effectively without full understanding of industrial design activity in attributes of products and using the appropriate methodology for grasping the main attributes. This thesis is purposed for developing the guideline of research models of consumer for industrial design by studying characteristics of industrial design activity in attributes of products through bibliography and defining the clear limit of design research focused on consumer selection through comparison with real purchase decision making procedure at every phase. Through the observation and analysis of the real purchase decision making procedure following the proposed guideline, the possibility of difference between the two cases has been shown in both theoretical and practical aspects.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.199-215
• /
• 1992

Sources of organic waste materials for aerobic and/or anaerobic degradation, or for composting of solid wastes in Germany were estimated. The basic microbiology and the energetics of these processes were compared with special emphasis on anaerobic degradation, for which a general degradation scheme of carbohydrates is presented. Advantages of anaerobic over aerobic treatment processes are pointed out and conditions for maintaining a highly stable anaerobic process as well as producing a sanitized, hygienic product are discussed. Reactor systems suitable for efficient treatment of wastes with a high or low proportion of suspended solids are principally compared and results of laboratory studies on the degradation of several wastes and animal manures summarized. Finally, a piggery slurry treatment factory for an ultimate slurry processing to obtain a dry fertilizer and a harmless, disposable liquid, as it is in operation in Helmond/Holland, is presented and preliminary process data are presented.