• 한국농공학회지
• /
• 제42권2호
• /
• pp.71-77
• /
• 2000

A multi-region model for solute transport through saturated soils has been developed to describe preferential flow. The model consists of numerous discrete pore groups, which are characterized by a discrete dispersion coefficient, flow velocity, and porosity . The hydraulic properties for each pore group are derived from a soil's hydraluic conductivity and soil water characteristic functions . Flow in pore group is described by the classical advection-disersion equation (ADE). An implict finite difference scheme was applied to the governing equation that results in a block-tridiagonal system of equations that is very efficient and allows the soil to be divided into any number of pore groups. The numerical technique is derived from methods used to solve coupled equations in fluid dynamics problems and can also be applied to the transport of interacting solutes. The results of the model are compared to the experimental data from published papers. This paper contributes on the characteristics of the method when applied to the parallel porosity model to describe preferential flow of solutes in soil.

• 한국농공학회지
• /
• 제39권2호
• /
• pp.62-73
• /
• 1997

The application of nutrients and pesticides to agricultural lands has been reported to contribute to groundwater contamination, which can be explained by preferential flow in lieu of convective-dispersive flow. An one-dimensional numerical model depicting preferential water and solute movement was modified to describe multi-layer flows. The model is based on a piecewise linear conductivity function. By combining conservation of mass and Darcy's law and using the method of characteristics a solution is obtained for water flow in which water moves at distinct velocities in different flow regions instead of an average velocity for the whole profile. The model allows transfer ofqr solutes between pore groups. The transfer is characterized by assuming mixing coefficients. The model was applied to undisturbed soil columns and an experiment site with structured sandy clay loam soil. Chloride, bromide, and 2, 4-D were used as tracers. Simulated solutes concentrations were in good agreement with the soil column data and field data in which preferential flow of solute is significant. The proposed model is capable of describing preferential solute transport under laboratory and field conditions.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권5호
• /
• pp.33-36
• /
• 2007

최근 들어 preferential flow같은 현장조건의 불균질한 매질을 이동하는 지하수 거동해석에 이류 분산 방정식을 적용하는데 많은 문제점들이 제기되어 왔다. 이에 따라 Kim 등(2005)은 최소한의 모형인자로 preferential flow 경로를 통한 토양지하수의 흐름을 예측할 수 있는 간단한 모형을 개발한 바 있다. Kim 등(2005)이 제시한 Generalized Preferential Flow Model(GPFM)은 토양을 표층주변의 분배 층(distribution layer)과 그 밑의 운반구역(conveyance zone)으로 나누어 거동을 예측하고 있다. 본 연구에서는 GPFM을 간단히 소개하고 기존의 다른 실험결과에 적용한 후 이류분산방정식(CDM)과의 비교를 통해 모형을 검증해 보고자 하였다. 기존에 발표된 두 개의 실험값에 GPFM을 적용해본 결과, GPFM은 세 가지 인자-유효함수비, 유속, 분산계수-를 입력하여 silty 및 sandy loam 토양 내 추적자의 파과곡선을 잘 예측하였다. CDM을 이용한 예측 값과 비교한 결과 GPFM과 CDM 모두 실제 관측된 파과곡선과 일치된 경향을 보였으나, GPFM에 의해 추측된 인자들이 더 현실적으로 가능한 값을 나타내었다. 인용된 두 실험값에 GPFM을 적용할 경우 예측 값에 가장 영향을 끼친 인자는 유효함수비로 나타났는데, 이는 Kim 등(2005)이 같은 종류의 토양에서 유속이 GPFM의 결과에 가장 영향을 끼쳤다고 보고한 것에 비해, 다른 성질의 토양에서는 유효 함수비가 가장 결정적인 인자임을 보여준다. 본 연구를 통해 GPFM이 이용하기가 쉽고 여러 가지 현장조건에 적용성이 높아 preferential flow 경로를 통한 토양지하수의 흐름을 예측할 수 있는 유용한 도구임을 확인하였다.

• 대한기계학회논문집A
• /
• 제20권1호
• /
• pp.79-87
• /
• 1996

SMC(Sheet Molding Compound) is made of unsaturated polyester resin and other additives reinforced with randomly distributed chopped fiberglass strands. Because of its higher stiffness per unit mass, SMC was used as a substitute for steel for automotive steel outer panels. Thus, understanding of flow characteristics during fabrication of SMC is of importance since the formation of weld line depends on material flow. In the present study, SMC compression molding simulations in the flat and T-shape molds were accomplished. During simulations, the preferential the preferential flow occurred at the low mold closing speed while plug flow was observed for the higher mold closing speed. When the preferential flow was observed, the weld line was seen at the final stage. For simulations, rigid-viscoplastic finite element method was applied. Self-contact algorithm was also applied in order to predict the formation of the weld line. Simulation results were compared to the experimental results available in the literature.

• 환경영향평가
• /
• 제4권1호
• /
• pp.25-35
• /
• 1995

The objective of the study is to produce preferential impact assessment factors for Environmental Impact Assessment by considering regional features and public participation in the initial stages of EIA. In order to produce preferential impact assessment factors, the study was carried out through theoretical research and a survey of public awareness as a ways to reflect public participation based on theoretical research. The survey of public awareness was conducted in the form of an interview to review the impact which the construction of atomic power plants at Hyo-am village, Jang-an, Kyungsang Province and Bi-hak village, Suhsang-myon, Ulsan-Kun will have on the surrounding environment: to reflect public participation on deciding preferential assessment: and to determine the extent of alternatives of the proposed project. As the result of the study, the following were identified as preferential assessment factors in the settlement and surrounding areas cultivation marine products, change of temperature of seawater due to flow of warm water, land use(negative), noise vibration during construction, existing plants, erosion accumulation, influx of manpower for construction(negative), recreation landscaping during construction and operation, change in flow of transportation during construction, the quality of seawater during construction and operation were produced as preferential assessment factors in both settlement area and neighboring areas. In the settlement area, the educational environment(negative & positive) and positive aspects of the influx of manpower for construction were also identified as preferential assessment factors.

• 환경영향평가
• /
• 제4권3호
• /
• pp.15-26
• /
• 1995

The objective of the study is to produce preferential impact assessment factors for Environmental Impact Assessment by considering regional features and public participation in the initial stages of EIA. In order to produce preferential impact assessment factor, the study was carried out through theoretical research and a survey of public awareness as way to reflect public participation based on theoretical research. The survey of public awareness was conducted in the form of an interview to review the impact which the construction of atomic power plants at Hyo-am village, Jang-an, Kyungsang Province and Bi-hak village, Suhsang-myon, Ulsan-Kun will have on the surrounding environment : to reflect public participation on deciding preferential assessment: and to determine the extent of alternatives of the proposed project. As the result of the study, the followings were identified as preferential assessment factors in the displacing settlement and surrounding areas: cultivation marine products, change of temperature of seawater due to flow of warm water, land use (negative), noise vibration during construction, existing vegetations, erosion sedimentation, influx of manpower for construction(negative), recreation landscaping during construction and operation, change in flow of transportation during construction, the quality of seawater during construction and operation were produced as preferential assessment factors in both displacing area and neighboring areas. In the displacing settlement area, the educational environment(negative & positive) and positive aspects of the influx of manpower for construction were also identified as preferential assessment factors.

• 대한의용생체공학회:의공학회지
• /
• 제15권3호
• /
• pp.253-258
• /
• 1994

Three-dimensional steady and pulsatile flows in an end-to-side anastomosis were investigated using a finite difference method in order to understand the flow dynamics in the preferential development of distal anastomotic intimal hyperplasia or thrombosis. Steady flow results revealed that a double helical vortex was formed in the host artery and flow recirculations near toe find heel regions were restricted due to the secondary flow. Oscillating wall shear stress with significant secondary flow might be flow dynamic reason of developing intimal hyperplasia or thrombosis near the anastomotic region.

• 멤브레인
• /
• 제14권1호
• /
• pp.75-84
• /
• 2004

폴리아미드계 역삼투 분리막의 투과성능을 비교하기 위하여 NaCl과 NaOCl을 함유하는 혼합용액을 공급수로 사용하여 연속운전과 단속운전 하에서 실험하여 보았다. 이 결과를 가지고 막 이동 모델의 선택적 적용이 가능함을 제시하고자 하였으며 투과 성능 분석 결과, 용액 확산 모델과 선흡착-모세관이동 모델이 운전 모드에 따라 상대적으로 유용함을 볼수 있었다. 연속 운전에서는 선흡착-모세관이동 모델을, 단속 운전에서는 용액 확산 모델을 따름을 알 수 있었다 NaOCl에 의한 표면 변화를 SEM 사진을 통하여 확인 할 수 있었다. 연속운전 후의 막은 염소 투과 결과 표면에서 부분적인 ridge and valley 구조가 나타났으며 단속 운전 후의 막은 표면 전반에서 변성이 일어난 것을 볼 수 있었다.

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.273-279
• /
• 2015

Effects of passive film quality by chemical passivation and solution flow on the corrosion behavior of 304 stainless steel in HCl solution were investigated using a coloration indicator, and by corrosion weight loss, electrochemical polarization and element dissolution measurements. A high redness degree suggests a low passive-film integrity for 304 stainless steel following air exposure, while the minimum redness degree for the samples after chemical passivation suggests a high passive-film integrity. In the static condition, samples subjected to air exposure exhibited a high corrosion rate and preferential dissolution of Fe. Chemical passivation inhibited the corrosion rate due to the intrinsically high structural integrity of the passive film and high concentrations of Cr-rich oxides and hydroxide. Solution flow accelerated corrosion by promoting both the anodic dissolution reaction and the cathodic reaction. Solution flow also altered the preferential dissolution to fast uniform dissolution of metal elements.

• Geomechanics and Engineering
• /
• 제16권4호
• /
• pp.423-433
• /
• 2018

A three-dimensional model is constructed to simulate water infiltration in an unsaturated slope from a leaking pipe. Adaptive mesh refinement and time stepping are used, assisted by an automatic procedure for progressive steepening of the hydraulic property function for better convergence. The model is justified by comparing the simulated results with experimental data. Steady-state flow is investigated considering various pipe water pressures, locations and sizes of the opening, and soil layering. The opening size significantly affects the soaked zone around the pipe. Preferential flow dominates along the pipe longitudinal direction in the presence of a loose backfill around the pipe.