• 멤브레인
• /
• 제14권1호
• /
• pp.75-84
• /
• 2004

폴리아미드계 역삼투 분리막의 투과성능을 비교하기 위하여 NaCl과 NaOCl을 함유하는 혼합용액을 공급수로 사용하여 연속운전과 단속운전 하에서 실험하여 보았다. 이 결과를 가지고 막 이동 모델의 선택적 적용이 가능함을 제시하고자 하였으며 투과 성능 분석 결과, 용액 확산 모델과 선흡착-모세관이동 모델이 운전 모드에 따라 상대적으로 유용함을 볼수 있었다. 연속 운전에서는 선흡착-모세관이동 모델을, 단속 운전에서는 용액 확산 모델을 따름을 알 수 있었다 NaOCl에 의한 표면 변화를 SEM 사진을 통하여 확인 할 수 있었다. 연속운전 후의 막은 염소 투과 결과 표면에서 부분적인 ridge and valley 구조가 나타났으며 단속 운전 후의 막은 표면 전반에서 변성이 일어난 것을 볼 수 있었다.

• 한국대기환경학회지
• /
• 제17권1호
• /
• pp.67-74
• /
• 2001

In the manufacturing process of PCB , three kinds of VOCs such as aceton, methanol and 2-metoxyethanol are being used. In this study, adsorption characteristics of activated carbon fibers(ACFs) and active carbon were examined to temove these VOCs. The experimental results showed that ACF has better adsorption and regeneration efficiency than activated carbon. Phenolic-resin based ACF showed the highest adsorption capacity and the capacity was not decreased after repeated regeneration by steam. On the adsorption and desorption experiments for ternary components, preferential adsorption with roll-over phenomena was appeared. 2-Metoxyethanol was strong adsorbaste and it displaced adsorbed methanol and aceton.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.149-156
• /
• 2000

For the adsorption of polyelectrolyte at the surface of polyacrylamide gel particle, preferential adsorption of the large polyelectrolyte such as DNA is governed by the surface area of an adsorbent. The adsorption equilibrium constant can be varied by surface geometry of porous polymer, and it can be described as a function of ionic strength and surface area. Physical parameters affecting the adsorption were estimated using the theoretical governing equation of polyelectrolyte which electrophoretically moved along the column, and geometrical surface area was estimated by Waldman-Mayer's physical model. The separation of polyelectrolytes was studied using the physical parameters estimated by ionic strength and surface geometry.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.446-450
• /
• 2003

T.f. 및 T.t. 박테리아의 흡착정도와 침출효율 간에 선형적인 비례관계는 관찰되지 않았다. 동일 배양균에서 재생로의 분진 즉 기질입자의 크기가 감소함에 따라 박테리아의 흡착정도와 Cu의 추출속도는 분명하게 선형적으로 증가했다. 다른 종류의 기질에 비해 재생로 분진에서 침출속도가 빠른 것은 주로 분진입자의 부서지기 쉬운 성질 때문으로 추정된다.

• 대한화학회지
• /
• 제41권5호
• /
• pp.239-245
• /
• 1997

광유로부터 polychlorinated biphenyls(PCBs)를 제거할 수 있는 가능성을 평가하기 위해 활성탄을 이용한 흡착반응을 연구하였다. 염소원자의 치환이 비교적 적은 PCBs로 구성되어 있는 Aroclor 1242의 흡착 효율은 95% 이상이었으나, 많은 염소원자들로 치환된 Aroclor 1260은 상당히 낮은 75%의 효율을 나타내었다. 관찰된 차이점은 평면이나 비평면 구조를 갖고 있는 PCBs의 기하학적인 구조에 기인한다. 실제로 평면구조 PCBs의 농도는 Aroclor 1260에서보다도 Aroclor 1242에서 훨씬 높다. PCBs의 독성은 주로 평면 구조와 관련되어 있기 때문에, 활성탄에 의한 평면구조 PCBs의 우선적인 흡착은 활성탄의 처리를 통해 독성의 감소가 성취될 수 있다는 것을 보여준다. 독성 감소의 효율은 Toxicity Equivalence Factor(TEF)를 써서 평가하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.81-81
• /
• 2010

Growth of TiO2 films prepared by atomic layer deposition (ALD) was studied on C fiber. Moreover, adsorption and photocatalytic decomposition of methylene blue on TiO2 thin films were studied. Preferential growth of TiO2 on steps of C surfaces could be identified by scanning electron microscopy (SEM). X-ray Photoelectron Spectroscopy (XPS) showed thickness-dependent positive core level shift of Ti, which can be interpreted in terms of enhanced final state charging for thicker films. Adsorption and photocatalytic behaviors of TiO2 thin films will be discussed in this poster.

• Korean Chemical Engineering Research
• /
• 제51권4호
• /
• pp.470-475
• /
• 2013

초음파-용매열 혼합방법으로 염화지르코늄과 1,4-benzenedicarboxylic acid를 사용하여 다공성 금속유기 구조체인 UiO-66을 1-L 규모로 제조하였다. 합성 개시 2시간 뒤 약 $0.2{\mu}m$의 작고 고른 형태와 $1,375m^2/g$의 높은 비표면적을 갖는 결정을 95%의 높은 수율로 얻을 수 있었다. 제조된 UiO-66 물질의 이산화탄소 흡착 거동을 조사한 결과, 1기압 273 K 및 298K에서 각각 198 및 84 mg/g의 흡착량과 32:1 이상의 높은 질소 대비 이산화탄소 흡착 선택성을 갖는 것을 확인하였다. 흡착이 진행됨에 따라 흡착열은 33에서 25 kJ/mol 로 감소하였다. 또한 UiO-66 물질을 사용하여 액상 회분식 조건에서 자일렌 이성체의 분리 연구를 수행하였으며, o-자일렌이 단일성분 최대 흡착능 및 경쟁흡착에서도 m-, p-자일렌 대비 약 2배 이상의 높은 흡착 선호도를 갖는 것을 확인할 수 있었다.

• 한국염색가공학회지
• /
• 제19권3호
• /
• pp.26-36
• /
• 2007

This study was carried out to treat the aqueous solutions containing reactive dyes(RB19, RR120 and RY179) by the Ozone demand flask method and adsorption process using activated carbon fiber(ACF) which are one of the main pollutants in dye wastewater. Ozone oxidation of three kinds of the reactive dyes was examined to investigate the reactivity of dyes with ozone, competition reaction and ozone utilization on various conditions for single- and multi-solute dye solution. Concentration of dyes was decreased continuously with increasing ozone dosage in the single-solute dye solutions. Competition quotient values were calculated to investigate the preferential oxidation of individual dyes in multi-solute dye solutions. Competition quotients(CQi) and values of the overall utilization efficiency, ${\eta}O_3$, were increased at 40mg/l of ozone dosage in multi-solute dye solutions. ACF(A-15) has much larger specific surface area$(1,584m^2/g-ACF)$ in comparison with granular activated carbon adsorbent (F400, $1,125m^2/g-GAC$), which is commonly used, and most of pores were found to be micropores with pore radius of 2nm and below. It was found that RB19 was most easily adsorbed among the dyes in this study. In the case of PCP (p-chlorophenol) and sucrose, which are single component adsorbate, adsorption capacities of ACF(A-15) were in good agreement with the batch adsorption measurement, and saturation time predicted of ACF columns for these components was also well agreed with practically measured time. But in the case of reactive dyes, which have relatively high molecular weight and aggregated with multi-components, adsorption capacities or saturation time predicted were not agreed with practically measured values.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.241-247
• /
• 2006

The catalytic performances for CO preferential oxidation in hydrogen-rich fuels were investigated by varying the types of alumina supports, additives excluding platinum, and synthetic methods of impregnation and sol-gel synthesis. The reactions were conducted in the range of $25{\sim}300^{\circ}C$ over Pt, Co, and/or Na impregnated catalysts supported on commercial gamma-alumina, pseudoboehmite, or sol-gel derived xerogels. Catalytic activities were enhanced by cobalt addition due to strong Pt-Co interactions in the bimetallic phase. Additional sodium promoted not only the formation of the Pt-Co bimetallic interphase but also oxygen adsorption capability, giving rise to increase in the CO oxidation rate at lower temperatures. Moreover, chemical interaction between Pt and Co was considerably enhanced by sol-gel synthesis.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.503-509
• /
• 2016

Fuel cell is a device for producing electricity by using the hydrogen produced by the fuel processor. At this time, CO is also created by the fuel processor. The resulting CO enters the stack where is produce electricity and leads to the adsorption of anode catalyst, finally the CO poisoning occurs. Stack which occurred CO poisoning has a reduction in performance and shelf life are gradually fall because they do not respond to hydrogen. In this paper, experiments that using a PROX reactor to prevent CO poisoning were carried out for removing the CO concentration to less than 10ppm range available in the fuel cell. Furthermore experiments by the PROX reaction was designed and manufactured with a water-cooling heat exchange reactor to maintain a suitable temperature control due to the strong exothermic reaction.