• 한국미생물·생명공학회지
• /
• 제20권5호
• /
• pp.559-564
• /
• 1992

섬유소 자원의 효율적 이용을 위하여 강력한 xylan 분해효소 생산 세균을 분리 및 선발하였으며, 형태학적, 배양학적 생리학적 특성을 확인한 결과 Bacillus sp. N25로 동정하였다. 이 균주에 의해서 생산된 효소를 ammonium sulfate precipitation, DAEA-sephadex A-50, Sephadex G-100 column으로 부분 정제하여 얻은 효소의 열안정성은 $50^{\circ}C$에서 30분간 처리시 80의 역가가 잔존 했으며, pH 안정은 pH 6-8 범위에서 30'C에서 10시간 방치 후에도 안정했으며, cellulose 분해능력은 없었으며, $Hg^{2+}$, $Ag^{2+}$, $Mn^{2+}$에 의해 저해되었다. 그리고 최종분해산물은 주로 xylose이므로 exo-type xylanase로 추정된다.

• 환경위생공학
• /
• 제10권2호
• /
• pp.79-88
• /
• 1995

The electrostatic precipitation of Auto- Bias has the advantages of a little of power consumption by the voltage to apply only at ionizer and the prevention of fire danger by current flow over. As this ionizer wire was used WXN- Pt material of diameter 90$\mu $m, that improved ion efficiency and safety, simplified a existing source of electric power by induced Auto- Bias voltage. Also, the new type collector used electric conductivity- film wag superior a electric safety and dust collection efficiency and was possible to wash it by water. As a experiment result of this Auto- Bias electrostatic collector, the induced Auto- Bias voltage by appling D.C 4.0∼6.0kV at ionizer was 1.3∼2.3kV and then the power consumption by applied voltage was 8- l8W. The pressure loss of collector by the amount of flowing was 6.1 OmmH$_{2}$O in 300m$^{3}$/hr and showed a safe state of the dust collection. The collection efficiency by particle size was 65.1-95.8% in 0.5∼5.0$\mu $m. After corona discharge of ionizer, the remains ozone concentration was found much lower than that of ACGIH or air pollution criteria in Korea.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.787-797
• /
• 2010

Nowadays meteorological information is systemized as a useful knowledge which has a significant effect on the overall industrial domains over the simple data. The distribution industry, which has the short life cycle, depends on the meteorological information at the strategic level. However, it is necessary to pay attention to the continuous investment in meteorological information because there is a hostility to paying for a service, particularly it does not provide accurate and reliable information. Therefore, the purpose of this study is to increase the usefulness of meteorological information in the distribution industry for its economic effectiveness from the core meteorological factors. We found significant meteorological factors (temperature, precipitation, disaster) that have a critical influence on the distribution industry through the hierarchical analysis process, and their importance according to the type of distribution channels, such as department store, large-scale discount store, convenience store, and home shopping. We performed the AHP analysis with 103 survey samples by middle managers from the various distribution channels. We found that precipitation is the critical meteorological factor across the distribution industry. Based on this result, we stress the difference in the level of the meteorological information in order for the effectiveness of each type of distribution channels.

• 대한수의학회지
• /
• 제38권4호
• /
• pp.777-783
• /
• 1998

Antigenic types of 114 Salmonella pullorum and 152 Salmonella gallinarum field isolates were evaluated. All 3 antigenic types were identified among field isolates of S pullorum by factor-serum analysis but the majority of them were standard type(90.4%). Of the 114 S pullorum isolates, only eight(7.0%) were intermediate type and 3(2.6%) were variant type. Using the ammonium sulfate precipitation(ASP) test, one-hundred and three(90.4%) S pullorum isolates were standard type, while intermediate and variant types were 8.4% and 1.4%, respectively. One-hundred and fifty-two S gallinarum isolates were identified as standard type by ASP test and serological analysis. According to the random amplified polymorphisms of DNA(RAPD) patterns, most of S pullorum isolates were differentiated with 3 types in their fragment-patterns. No correlations were found between SDS-PAGE profiles and antigenic types of S pullorum isolates.

• Water Engineering Research
• /
• 제5권2호
• /
• pp.55-68
• /
• 2004

The GLEAMS (Groundwater Loading Effects of Agricultural Management System, version 3.0) water quality model was used to predict hydrology and water quality and to evaluate the effects of soil types from a cattle-grazed pasture field of Bermuda-Rye grass rotation with poultry litter application as a fertilizer in North Alabama. The model was applied and evaluated by using four years (1999-2002) of field-measured data to compare the simulated results for the 2.71- ha Summerford watershed. $R^2$ values between observed and simulated runoff, sediment yields, TN, and TP were 0.91, 0.86, 0.95, and 0.69, respectively. EI (Efficiency Index) of these parameters were 0.86, 0.67, 0.70, and 0.48, respectively. The statistical parameters indicated that GLEAMS provided a reasonable estimation of the runoff, sediment yield, and nutrient losses at the studied watershed. The soil infiltration rates were compared with the rainfall events. Only high intensity rainfall events generated runoff from the watershed. The measured and predicted infiltration rates were higher during dry soil conditions than wet soil conditions. The ratio of runoff to precipitation was ranging from 2.2% to 8.8% with average of 4.3%. This shows that the project site had high infiltration and evapotranspiration which generated the low runoff. The ratio of runoff to precipitation according to soil types by the GLEAMS model appeared that Sa (Sequatchie fine sandy loam) soil type was higher and Wc (Waynesboro fine sandy loam, severely eroded rolling phase) soil type relatively lower than the weighted average of the soil types in the watershed. The model under-predicted runoff, sediment yields, TN, and TP in Wb (Waynesboro fine sandy loam, eroded undulating phase) and Wc soil types. General tendency of the predicted data was similar for all soil types. The model predicted the highest runoff in Sa soil type by 105% of the weighted average and the lowest runoff in Wc soil type by 87% of the weighted average

• Current Research on Agriculture and Life Sciences
• /
• 제16권
• /
• pp.37-44
• /
• 1998

낙동강 지류중 하나인 위천유역 및 동성유역권의 수공구조물 설계시 설계홍수량 결정을 위한 기본자료를 제공하고자 시간분포의 유형과 기저유량의 변화에 따른 가능최대홍수량의 양상을 분석하였다. 먼저 수문기상학적인 방법으로 PMP를 추정하고, Blocking방법의 central, advanced 그리고 delayed type를 각각 이용하여 시간 분포시킨 호우를 Clark방법을 이용하여 PMF를 산정한 결과 다음과 같은 결론을 얻었다. 1. PMP시간분포형에 따라서 첨두 PMF는 기저유량에 따라 advanced일 때 3145.3~3348.3cms, central일 때 3774.6~3977.7cms, delayed일 때 3814.6~4017.3cms로 나타났다. 여기서 강우의 시간분포가 advanced type이고 기저유량이 Minimum일 때 central과 delayed에 비하여 첨두PMF가 670cms정도 작게 나타남을 알수 있었다. 따라서 최대 첨두PMF와 최소 첨두PMF는 각각 delayed와 advanced일 때의 4017.3cms와 3145.3cms이며, 결과에 의한 평균 PMF는 3653.6cms로서 이 결과가 위천유역의 설계홍수량으로 타당하다고 사료된다. 2. 평균PMF와 가지야마에 의한 결과치와는 가지야마 값보다 1.7배 큰값으로 나타났고 이는 1,000년에서 10,000년 빈도사이의 홍수량으로 추정된다.

• Macromolecular Research
• /
• 제17권5호
• /
• pp.339-345
• /
• 2009

The core/shell type structure of the highly crosslinked poly(glycidylmetharylate-co-divinylbenzene) microspheres prepared in the precipitation polymerization in acetonitrile was thoroughly verified by means of swelling, $^1H$ NMR, XPS, TEM and TGA measurements. In the XPS measurement, the higher the GMA content, the higher the oxygen content was observed, implying that the higher content of GMA is observed in the particle surface. The further verification of the core/shell structure of the poly(GMA-co-DVB) particles was carried out using $^1H$ NMR and TEM techniques, resulting in the poly(GMA-co-DVB) particles with the GMA rich-phase and DVB rich-phase. In overall, the poly(GMA-co-DVB) microspheres consist of a highly crosslinked DVB rich-phase in the core and slightly or non-crosslinked GMA rich-phase in the shell part due to the different reaction ratios between two monomers and self-crosslinking density of DVB.

• 한국세라믹학회지
• /
• 제17권4호
• /
• pp.179-187
• /
• 1980

Perovskite-type oxide catalysts in the $\textrm{LaMnO}_3$ family were prepared by both freeze drying and precipitation technique, and their catalytic activities with respect to the oxidation of CO with $O_2$ were measured in the composite gases. Freeze drying is a new technique for the prevention of migration of the solutes during drying. Therefore, the corrugated cordierite monolith fabricated with the Ø 1mm stainless steel bar was directly impregnated with nitrate solutions containing the appropriate cations, freeze dried and calcined. Precipitation was done by using $\textrm{(NH_4)}_2\textrm{CO}_3$ but the precipitated catalysts gave lower catalytic than the freeze dried samples due to, in part, relatively high calcining temperature. In this study, freeze dried composition had high catalytic activity, and their apparent activation energy for oxidation of CO was calculated by the rate plots using the data where the percent conversion of CO was less than 20%.

• 열처리공학회지
• /
• 제9권2호
• /
• pp.91-102
• /
• 1996

Microstructural control to produce multiphase structure has received much attention to improve the high temperature strength as well as low temperature ductility of intermetallics. Transmission electron microscopic investigation has been carried out concerning the effect of Cr-precipitation on the mechanical properties of B2-ordered NiAl containing 4 to 8 mol% of Cr. By aging at temperatures around 973 K after solution annealing, fine spherical precipitates took place homogeneously in the NiAl matrix and the alloys hardened appreciably. Selected area electron diffraction (SAED) patterns have not revealed any additional extra-spots during aging, because the Cr-particles show cube-cube orientation relationship and keep a perfect coherency with the ordered matrix lattice. Dislocations were confirmed to bypass the particles during deformation. Although the dispersion of Cr-particles increased the yield strength of NiAl at intermediate temperature, the strength decreased appreciably at higher temperatures.

• 한국응용과학기술학회지
• /
• 제25권4호
• /
• pp.511-517
• /
• 2008

We make high-functional inorganic-composite pearlescent pigment material that coated with carmine on the plate-type particle such as mica. In this experiment, we synthesized composite powder using pH control precipitation method. We make an experiment with changing as synthesis factors that are concentrations of starting material and precipitation materials. We analyzed pearlescent powder's shape, and crystallization with FE-SEM, XRD, and EDS. Optimum condition for preparation of carmine coated mica pearlescent pigment is pH $4.5{\sim}5.5$.