• Journal of Forest and Environmental Science
• /
• 제35권4호
• /
• pp.223-231
• /
• 2019

Castanopsis indica (Sil Batna) is an ecologically valuable multipurpose indigenous tree species of Bangladesh. Considering its high value but poor natural regeneration due to seed dormancy, the authors conducted an experiment at the Institute of Forestry and Environmental Sciences Chittagong University (IFESCU) during 2012-2013 to find out effective pre-sowing treatments. Ten pre-sowing seed treatments were applied on mature, even-sized seeds namely-control; sandpaper rubbing; nail clipping; immersion in normal water (at room temperature: 24℃) for 24 hrs., 48 hrs. and 72 hrs.; immersion in hot water (80℃) for 1 minute; soaking in 10% dilute H₂SO₄; soaking in 10% HCl for 5 minutes; and sowing in propagator house. Seeds sown after sandpaper rubbing at the distal end revealed best performances by providing highest germination percent (66.7%), germination energy (30%), germination index (0.17), germination rate (0.0145), germination value (30%) and plant percent (66.7%) within shortest period (38 days). The treatment also produced most vigor seedlings with 20.9 cm shoot height, 15 node number, and largest leaves (11.1 cm×2.9 cm). Hence, it is recommended to adopt sandpaper rubbing method for maximum germination and quality seedlings.

• 한국식품과학회지
• /
• 제39권3호
• /
• pp.289-294
• /
• 2007

숙지황의 제조에 미치는 침지용매의 영향을 살펴보기 위하여 건지황을 막걸리와 증류수에 24시간 침지한 후 구증구포하여 숙지황을 제조하면서 증수에 따른 catalpol, 5-HMF, polyphenol, flavonoid, 항산화활성 및 ACE 저해활성 등을 분석하였다. Catalpol 함량은 건지황에서 631.4ppm으로 나타났으며, 증수가 증가할수록 급격히 감소하였고 막걸리 침지는 8증(75.84 ppm)까지, 증류수 침지 처리구는 9증(61.27 ppm)까지만 검출되었다. 5-HMF, 총 폴리페놀, 총 플라보노이드 함량은 증수가 증가할수록 증가하였으며, 5-HMF는 막걸리 침지는 13증(0.40%) 이후에, 증류수 침지 처리구는 11증(0.40%) 이후에 시판 숙지황의 함량과 비슷하였고 총 폴리페놀 함량과 총 플라보노이드 함량은 막걸리와 증류수침지 처리구 모두 14증에서 가장 높은 함량을 나타내었다. 전자공여능은 건지황과 시판 숙지황 모두 1 mg/mL의 농도에서 각각 19.44 및 52.49%이었으며, 막걸리와 증류수침지 시료 모두 14증에서 각각 66.80 및 75.60%로 증가하였다. 총 항산화력도 처리증수가 증가할수록 증가하였다. ACE 저해활성은 건지황과 시판 숙지황 모두 1 mg/mL의 농도에서 각각 28.70 및 49.37%로 이었으며, 처리증수가 증가할수록 증가하여 막걸리와 증류수침지 시료 모두 10증에서 각각 93.23 및 94.78%로 가장 높은 활성을 나타내었다.

• 한국식품저장유통학회지
• /
• 제11권1호
• /
• pp.17-21
• /
• 2004

본 실험에서는 식품의 미생물작용에 의한 변질의 저해 효과가 뛰어난 식물성천연항균제품(botanical antimicrobial agent)에 천연보조제(인삼추출물, 알로에, 매실추출물)를 첨가하여 paper disk법에 의한 항균성 검사를 실시한 결과, 인삼추출물을 첨가한 천연복합항균제재(BAAG)에서 생육저해환이 가장 크고 뚜렷하게 나타났다. 한편, 천연 항균복합제재 용액에 콩나물용 콩을 농도별로 각각 침지 처리하여 냉장 및 상온에 저장하면서 대장균수, 총균수의 변화를 살펴보고, 외관상의 변화에 미치는 영향을 수도수로 침지처리한 대조구와 비교하면서 조사하였다. 실험 결과, 대장균은 BAAG의 침지처리에 의해 성장이 억제되었으며 처리농도가 증가시킬수록 균증식 억제 효과가 뚜렷하였고, 총균수도 BAAG 처리구의 콩나물이 가장 낮은 수치를 나타내었다. 외관상의 변화와 상품 가치를 측정한 결과는 수도수처리구인 대조구 콩나물이 저장 3일 후부터 부패취와 함께 표피의 점질성 갈변이 형성되어 상품가치가 크게 떨어진 상태였다. 위와 같은 결과, BAAG용액 속에서 콩나물 콩을 발아시켜 침지 처리함으로써 콩나물의 유통기간을 상당기간 연장할 수 있을 것으로 기대된다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2006년도 한국약용작물학회 공동춘계학술발표회
• /
• pp.380-381
• /
• 2006

• 펄프종이기술
• /
• 제44권6호
• /
• pp.36-42
• /
• 2012

The empty fruit bunch fibers(EFB) of oil palm were examined for optimal utilization of the EFB fibers. The EFB fibers were obtained by shredding EFB, followe by removal of fines. The surface properties of the fibers were modified with various pre-treatments, such as hot water extraction, the soaking treatments with NaOH, $ClO_2$ and n-hexane. The changes in the fiber surface were examined with FT-IR method, which showed the changes in chemical compositions such as pectin, lignin, and etc. according to the pre-treatment methods. And the z-directional tensile testing of the fiber mold made of the treated EFB fibers showed the changes in the bonding strength by the pre-treatments. The fiber mold made of EFB fibers treated with $ClO_2$ showed the greater increase in the tensile energy absorption although the NaOH treatment resulted in the severer impact on the EFB fibers.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.265.1-265.1
• /
• 2013

Nanoporous anodic aluminum oxide (AAO), a self-ordered hexagonal array has various applications for nanofabrication such as nanotemplate, and nanostructure. In order to obtain highly-ordered porous alumina membranes, Masuda et al. proposed a two-step anodization process however this process is confined to small domain size and long hours. Recently, alternative methods overcoming limitations of two-step process were used to make prepatterned Al surface. In this work, we confirmed that there is a specific tendency used a PDMS stamp to obtain a pre-patterned Al surface. Using the nanoindentaions of a PDMS stamp as chemical carrier for wet etching, we can easily get ordered nanoporous template without two-step process. This chemical etching method using a PDMS stamp is very simple, fast and inexpensive. We use two types of PDMS stamps that have different intervals (800nm, 1200nm) and change some parameters have influenced the patterning of being anodized, applied voltage, soaking and stamping time. Through these factors, we demonstrated the patterning effect of large scale PDMS stamp.

• 한국식품영양학회지
• /
• 제16권3호
• /
• pp.218-223
• /
• 2003

This study is proceeded on the development of standard method for making soybean paste by Korean traditional method. Fermentation condition of Meju was 1) Pre-fermentation : 30 days in about 20$^{\circ}C$ room, 2) Main fermentation : 5 days in 30$^{\circ}C$ or upper temperature, 3) Post fermentation and drying : 30 days in well sunlightened room in January. Meju was soaked in 18% salt solution(Meju 7kg/salt solution 20L) for 35～40 days (from late February to early April) and after soaking Meju was filtered as unsoluble solute and crushed and put into traditional Korean receptacle(named 'Dok'). Crushed Meju was stored from early April to mid September and Meju was changed into soybean paste(Doen-jang). During fermentation amino acid nitrogen in Doen-jang was slightly increased in early period and decreased lately. It has been proved that by panel test soybean paste made by the method suggested in this study was more excellent than commercially fermented soybean paste. This study has presented the possibility of commercial production of soybean paste made by traditional method.

• 한국자원식물학회지
• /
• 제29권3호
• /
• pp.339-346
• /
• 2016

This study was carried out to develop an effective seed propagation method for Thalictrum rochebrunianum var. grandisepalum (H. Lev.) Nakai by analyzing seed dormancy types and germination characteristics. Seeds were collected between September to October at Gangwon province, and well-selected seeds were used while being dry-stored at 4±1℃. The seed size ranged 4.52 × 1.58 ㎜ and the weight of thousand seeds were 1,603.5 ± 0.02 ㎎. The moisture content was 7.2%. Seeds were achene type, and morphology characters showed an elliptical shape and rough texture, and light brown in color. Moist-chilling treatment was conducted for dormancy breaking because the seeds had an undeveloped embryo of liner type. The embryo had developed during a moist-chilling period, constantly, and fully developed in 10 weeks. Consequently, it seemed to be non-deep complex or intermediate complex type of morphophysiological dormancy, and embryo dormancy was broken by wet-chilling for 10 weeks. After 10 weeks of wet-chilling treatment, seed germination began. Germination percentage was higher in dark condition raher than light condition and recorded the maximum at 25℃ in the dark (16.3%). A pre-soaking treatment with a combined plant growth hormones promoted germination and shortened T₅₀. Specifically, seed germination of 84.5% was achieved by pre-soaking of seeds with a combined solution of 500 ㎎/L GA₃ and 10 ㎎/L kinetin for 24 h after a wet-chilling treatment for 10 weeks. Thus the effect of plant growth hormones coupled with chilling temperature on seed breaking dormancy provide asubsequent growth of seedlings for successful plantation.

• Journal of Microbiology and Biotechnology
• /
• 제34권4호
• /
• pp.846-853
• /
• 2024

Adzuki bean (Vigna angularis), which provides plant-based proteins and functional substances, requires a long soaking time during processing, which limits its usefulness to industries and consumers. To improve this, ultrasonic treatment using high pressure and shear force was judged to be an appropriate pretreatment method. This study aimed to determine the optimal conditions of ultrasound treatment for the improved hydration of adzuki beans using the response surface methodology (RSM). Independent variables chosen to regulate the hydration process of the adzuki beans were the soaking time (2-14 h, X₁), treatment intensity (150-750 W, X₂), and treatment time (1-10 min, X₃). Dependent variables chosen to assess the differences in the beans post-immersion were moisture content, water activity, and hardness. The optimal conditions for treatment deduced through RSM were a soaking time of 12.9 h, treatment intensity of 600 W, and treatment time of 8.65 min. In this optimal condition, the values predicted for the dependent variables were a moisture content of 58.32%, water activity of 0.9979 a_w, and hardness of 14.63 N. Upon experimentation, the results obtained were a moisture content of 58.28 ± 0.56%, water activity of 0.9885 ± 0.0040 a_w, and hardness of 13.01 ± 2.82 g, confirming results similar to the predicted values. Proper ultrasound treatment caused cracks in the hilum, which greatly affects the water absorption of adzuki beans, accelerating the rate of hydration. These results are expected to help determine economically efficient processing conditions for specific purposes, in addition to solving industrial problems associated with the low hydration rate of adzuki beans.

• 한국자원식물학회지
• /
• 제30권1호
• /
• pp.50-57
• /
• 2017

본 연구는 식의약소재로 활용 가치가 높은 늘어진장대(Arabis pendula L.)의 대량증식을 위한 기초연구로 종자의 형태적 특성과 발아특성을 규명하고, 최적 발아조건을 규명하고자 수행되었다. 늘어진장대 종자는 종피에 날개가 있는 원형으로 색은 진갈색이며, 너비 1.47 mm, 길이 1.25 mm이고, 배는 굴곡형이며 무배유종자이다. 온도와 광조건 실험에서, 종자 발아는 $20^{\circ}C$, 암조건에서 가장 우수하였다(49.7%). 그러나 암조건에서는 유묘가 약하고 웃자랐으며, 자엽이 작고 말려있는 특징을 보였다. 종자 발아와 유묘의 생육을 촉진하기 위하여 종자를 다양한 농도의 $GA_3$ 희석액(0, 200, 500, 1,000 mg/L)에 침지하여 전처리 한 후 파종하였다. 연구 결과, $GA_3$ 희석액 500 mg/L처리구에서 종자 발아율이 가장 높고(97.3%), 발아 소요기간이 짧았으며(8.1일), 유묘의 생육 또한 왕성하였다. 연구의 결과, 늘어진장대 종자의 최적 발아조건은 $GA_3$ 500 mg/L희석액에 침지처리($4^{\circ}C$, dark, 24시간)하여 $20^{\circ}C$에 파종하여 15일 동안 발아시키는 것으로 확인되었다.