• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.687-691
• /
• 2001

Al alloy matrix composite with TiNi shape memory fiber as reinforcement has been fabricated by hot pressing to investigate mechanical properties. The stress-strain behavior of the composites was evaluated at temperatures between 363K and room temperature as a function of pre-strain by using experimental and finite element analysis, and both cases showed that the tensile stress at 363K was higher than that of the room temperature. Especially, the tensile stress of this composite increases with increasing the amount of pre-strain, and it also depends on the volume fraction of fiber and heat treatment. The smartness of the composite is given due to the shape memory effect of the TiNi fiber which generates compressive residual stress in the matrix material when heated after being pre-strained.

• Communications for Statistical Applications and Methods
• /
• 제30권1호
• /
• pp.37-48
• /
• 2023

Shape analysis is a method for measuring, describing and comparing the shape of objects in geometric space. An important aspect is to obtain Procrustes distance based on least square method. We note that the shape is all the geometrical information that remains when location, scale and rotational effects are filtered out from an object. However, and unfortunately, when we cannot measure some landmarks which are some biologically or geometrically meaningful points of any object, it is not possible to measure the variation of all shapes of an object, including that of the incomplete object. Hence, we need to replace the missing landmarks. In particular, Albers and Gower (2010) studied the missing rows of configurations in Procrustes analysis. They noted that the convergence of their approach can be quite slow. In this study, alternatively, we derive an algorithm for estimating the missing landmarks based on the pre-shapes. The pre-shape is invariant under the location and scaling of the original configuration with the centroid size of the pre-shape being one. Therefore we expect that we can reduce the amount of total computing time for obtaining the estimate of the missing landmarks.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.453-459
• /
• 2004

TiNi/ Al6061 shape memory alloy (SMA) composite was fabricated by hot press method to investigate the microstructure and mechanical properties. Interface bonding between TiNi reinforcement and A1 matrix was observed by using SEM and EDS. Pre-strain was imposed to generate compressive residual stress inside composite. A tensile test for specimen, which under-went pre-strain, was performed at high temperature to evaluate the variation of strength and the effect of pre-strain. It was shown that interfacial reactions occurred at the bonding between matrix and fiber, creating two inter-metallic layers. And yield stress increased with the amount of pre-strain. Acoustic Emission technique was also used to nondestructively clarify the microscopic damage behavior at high temperature and the effect of pre-strain of TiNi/ Al6061 SMA composite.

• 도시과학
• /
• 제11권1호
• /
• pp.1-8
• /
• 2022

As the magnitude and frequency of earthquakes increase in Korea, interest in earthquake damage reduction technology has increased. Therefore, research on vibration damping devices that directly respond to seismic loads is being actively researched. After an earthquake, damage or destruction of the device occurs due to the yield of materials, and thus it takes considerable cost and time for restoration and replacement. To supplement the problems of the existing earthquake damage reduction technology, a study was conducted on the recentering smart damper that can be used continuously after an earthquake. In this study, the recentering smart damper that can be restored to its original shape after load removal was developed using superelastic shape memory alloy, pre-compressed polyurethane. General steel was commonly applied to verify the seismic performance of the superelastic shape memory alloy, and the performance of the smart damper was verified according to the amount of polyurethane pre-compressed

• 한국분무공학회지
• /
• 제22권3호
• /
• pp.116-121
• /
• 2017

Pre-combustion chamber type indirect diesel engines have different combustion characteristics compared with those of common rail direct injection engine. The CONVERGE, specific engine CFD program, was used to simulate hollow cone spray model and combustion. The air-fuel mixture flow propagating from pre-combustion chamber to cylinder was concentrated at top half and center of the pre-combustion chamber throat. Stronger mixture flow was formed at smaller and longer throat cases. As a result, thermal efficiency and fuel consumption were improved for modified throat shape and the soot emission was also reduced.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.186-191
• /
• 2001

Tensile residual stress happen by difference of coefficients of thermal expansion between fiber and matrix is one of the serious problems in metal matrix composite(MMC). In this study, TiNi alloy fiber was used to solve the problem of the tensile residual stress as the reinforced material. TiNi alloy fiber improves the tensile strength of composite by occurring compressive residual stress in matrix using shape memory effect of it. Pre-strain was added to generate compressive residual stress inside TiNi/A16061 shape memory alloy(SMA) composite. It was also evaluated the effect of compressive residual stress corresponding to pre-strains variation and volume fraction of TiNi alloy. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain difference of TiNi/A16061 SMA composite. In addition, two dimensional AE source location technique was applied to inspect the crack initiation and propagation in composite.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.72-77
• /
• 2001

Tensile residual stress happen by difference of coefficients of thermal expansion between fiber and matrix is one of the serious problems in metal matrix composite(MMC). In this study, TiNi fiber was used to solve the tensile residual stress as the reinforced material. TiNi fiber improves the tensile strength of composite by occurring compressive residual stress in matrix using shape memory effect of it. Pre-strain was added to generate compressive residual stress inside TiNi/A16061 composite. It was also evaluated the effect of compressive residual stress corresponding to pre-strains variation. AE technique was used to clarify the microscopic damage behavior at high temperature and the effect of pre-strain difference of TiNi/A16061 shape memory alloy composite.

• 복식문화연구
• /
• 제6권3호
• /
• pp.201-216
• /
• 1998

This study is aimed at exploring a reasonable and reliable method of measuring pre-school children's somatotypes and there by, data basing the information obtained and classifying their somatotypes, at providing useful data which can be utilized for the design of their dress forms and enhancing the fitness of their apparels. to this end, 330 pre-school children living in the capital area and aged fro m4 to 6 were sampled to be subject to the measurement of their somatotypes. The results of this study can be summarized as follows; 1. As the pre-school children grow, the scales indicating their vertical growth including height could well be measured differently, but those scales indicating their lateral somatotypes which reflect their postural changes did not show among age groups. in other words, male kids were higher in the scales including height than female kids, while there were not differences between sexes in most scales indicating their lateral somatotypes. 2. The elements comprising the somatotypes were the size of body skeleton, the thickness of body mass, the posture and shape of body mass, the lateral under-neck shape, the extrusion of belly, the length between front and the back shoulder, the shape of lower belly, the shape of upper hip, the shape of lower hip and the slope of shoulders. Among them, the first two elements accounted for 64.8% of the total distribution, which means that these two elements explain the body-mass somatotypes of kid's most effectively. 3. The sample kids were divided into two types for classification of their somatotypes. As a result, it was found that the elements determining their somatotypes most influentially are, unlike adults' case the size of body skeleton rather than posture or lateral body shape. The type I showed less dimensions in most scales than type II, while their shoulder were les developed,. The type I was found distributed much in 4-year-old female kids. The type II showing more development in each element was found distributed much in 6-year-old male kids.

• 비파괴검사학회지
• /
• 제22권1호
• /
• pp.45-52
• /
• 2002

금속복합재료 (MMC) 내부에서의 강화재와 기지재사이의 열팽창계수의 차이에 의해 발생하는 인장잔류응력은 복합재료의 인장강도를 저하시키는 심각한 문제중의 하나이다. 따라서 본 연구에서는 TiNi/A16061 형상기억복합재료내부의 인장잔류응력의 문제를 해결하기 위하여 강화재로써 TiNi 합금을 사용하였다. TiNi 합금은 형상기억효과를 이용하여 복합재료내부에 압축잔류응력을 발생시킴으로써 인장강도를 증가시키는 역할을 한다. 복합재료내부에 압축잔류응력을 발생시키기 위하여 예변형(pre-strain)을 가하였다. 본 연구에서는 예변형의 변화에 따른 압축잔류응력의 영향을 평가하였으며 AE 기법을 이용하여 고온에서의 복합재료의 미시적 손상거동과 예변형의 영향을 평가하였다.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.124-130
• /
• 2009

In the multi-stage shape drawing process, the most important aspect for the economy is the correct design of the various drawing stage. For most of the products commonly available round or square materials can be used as initial material. However, special products should be pre-rolled. This study proposes a process design method of multi-stage shape drawing process for producing cross roller guide. Firstly, a standard classification of shape drawing process is suggested based on the requirement of pre-rolling process. And a design method is proposed to design the intermediate die shape. The process design method is applied to design the multi-stage shape drawing process for producing cross roller guide. Finally, the effectiveness of the proposed design method is verified by FE-analysis and shape drawing experiment.