• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.189-189
• /
• 2008

Due to the environmental issue vast research is going on to replace the widely used lead contented piezoelectric materials. Bismuth sodium titanate (abbreviated as BNT) based bismuth sodium titanate-barium titanate (abbreviated as BNBT) ceramic was prepared by using modified method rather than conventional mixed oxide method. This modification was made to improve the properties of BNT based ceramic. In this procedure $BaTiO_3$ (abbreviated as BT) was prepared using conventional mixed oxide method. Analytical grade raw materials of $BaCO_3$ and $TiO_2$ were weighted and ball milled using ethanol medium. The mixed slurry was dried and sieved under 80 mesh. Then the powder was calcined at $1100^{\circ}C$ for 2 hours. This calcined BT powder was used in the preparation of BNBT. Stoichiometric amount of $Bi_2O_3$, $Na_2CO_3$, $TiO_2$ and BT were weighted and mixed by using ball mill. The used calcination temperature was $850^{\circ}C$ for 2 hours. Calcined powder was taken for another milling step. BNBT disks were pressed to 15 mm of diameter and then cold isostatical press (CIP) was used. Pressed samples were sintered at $1150^{\circ}C$ for 2 hours. The SEM microstructure analysis revealed that the grain shape of the sintered ceramic was polyhedral and grain boundary was well matched where as the sample prepared by conventional method showed irregular arrangement and grain boundary not well matched. And sintered density was better (5.78 g/cc) for the modified method. It was strongly observed that the properties of BNBT ceramic near MPB composition was found to be improved by the modified method compare to the conventional mixed oxide method. The piezoelectric constant dB of 177.33 pC/N, electromechanical coupling factor $k_p$ of 33.4%, dielectric constant $K_{33}^T$ of 688.237 and mechanical quality factor $Q_m$ of 109.37 was found.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제35권2호
• /
• pp.153-172
• /
• 2021

미래 사회는 데이터를 다룰 수 있는 역량이 특히 중요해질 것이라 예측되며, 따라서 통계적 지식과 더불어 통계적 사고력을 갖춘 교사 교육이 필요한 시대가 되었다. 이에 따라 본 연구는 연구자들이 개발한 데이터 분석 프로젝트를 예비 교사들에게 적용해본 뒤 이들의 통계적 지식의 변화를 살펴보고 통계적 사고력을 활용한 데이터 기반 의사 결정 경험의 내용을 살펴보았다. 해당 프로젝트를 통해 예비 교사들은 실제 데이터를 공학적 도구를 통해 분석하는 기회를 가질 수 있었다. 연구를 위해 혼합연구 모형을 적용하여 예비 교사들의 통계적 지식의 변화를 양적으로 분석하였고 데이터 기반 의사 결정의 경험을 질적으로 살펴보았다. 그 결과 예비 교사들은 모평균과 표본평균의 관계, 그리고 모평균 추정 및 해석에 관한 통계적 지식이 부족한 것으로 드러났다. 데이터 기반 의사 결정에 관해서는 데이터와 분석 방법 및 분석 결과에 대한 이해의 깊이에 차이를 보였으며 이러한 차이는 예비 교사들이 한 모둠에서 같이 활동한 경우에도 발생하였다. 이와 같은 결과를 바탕으로 통계 교육의 질 제고를 위한 제안점을 논하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.395-398
• /
• 2000

Recently, increasement of usage contents of sea sand in constructing concrete structures due to insufficiency of high quality river sand, led to many studies for steel corrosion and control methods on it in concrete. But, domestic studies for threshold chloride contents of steel corrosion are not so many as those of foreign states. In this study, the electrochemical test as half cell potential measurement and linear polarization method to estimate the corrosion of steel in contents mixed with several levels chloride contents was performed, thereby, pre-mixed chloride were compared with results measured quantitatively for steel corrosion. And, based on these data, a trial to determine threshold chloride contents of steel corrosion was made.

• Ocean Science Journal
• /
• 제41권1호
• /
• pp.31-41
• /
• 2006

Seasonal changes of abundance of the main phytoplankton groups of species (diatoms, dinoflagellates, chrysophytes, small flagellates and cryptophytes) and a set of environmental parameters were investigated in coastal and pre-estuarine waters of Peter the Great Bay (East/Japan Sea) in May-October of 1998 and 1999. Three periods of mass development were revealed: spring, summer and autumn blooms, with successive change of species. The conditions favourable for each group of species were determined. Driving mechanisms of the succession include nutrients transport through seasonal pycnocline by turbulent mixing, terrestrial nutrients supply by monsoon floods, nutrients supply by upwellings, and light control by the thickness of upper mixed layer. Summer succession could be explained by a simple SST-MLD diagram similar to Pingree S-kh diagram with sea surface temperature as indicator of stratification (S) and mixed layer depth as indicator of light availability (kh).

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.393-398
• /
• 2004

This research offers recycling method of NaOH from mercerizing process of cotton fabric. The measuring system of NaOH concentration was designed for the mercerizing process and tested for various conditions which can be occurred in factory. The accuracy of the system was varied as the testing condition was changed. As the concentration of sulfuric acid used for titrating NaOH decreased, the accuracy of measuring system increased. The concentration of NaOH for waste water collected from mercerizing process was measured by 5.2%. As the ratio of newly mixed NaOH increased, moisture regain. water absorbency and whiteness of the specimen increased. The bending rigidity(B) and shear rigidity(G) decreased, as the ratio of newly mixed NaOH increased.

• Tribology and Lubricants
• /
• 제25권1호
• /
• pp.66-72
• /
• 2009

Al-based composites reinforced with SiC particulate were fabricated using a thermal spray process, and dry sliding wear behavior of the composites was investigated. Pre-mixed Al and SiC powders were sprayed on an A16061 substrate by flame spraying, and dry sliding wear test were performed under various sliding speed and applied load conditions against ${Al_2}{O_3}$ ball. Wear behavior of the composites was studied by using scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). And build-up mechanism of MML on the worn surface of the composites was examined. It was revealed that these MML was formed of debris from the contact surface of the composites and effected to wear behavior of the composites protecting the contact surface of the composites.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.154-155
• /
• 2022

In this study, propose a plan to efficiently utilize CGS, a by-product generated from IGCC, as a mixed fine aggregate for concrete. The effect of the premixed cement types and CGS replacement rate on the overall characteristics and length change rate of concrete was analyzed. As a result of the analysis, the effect of CGS was found to be insignificant, and the effect of cement was found to be dominant.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.51-54
• /
• 2008

In this paper, we propose a practical method for displaying 2D/True3D mixed contents in real-time. Many companies released their 3D display recently, but the costs of producing True3D contents are still very expensive. Since there are already a lot of 2D contents in the world and it is more effective to mix True3D objects into the 2D contents than making True3D contents directly, people became interested in mixing 2D/True3D contents. Moreover, real-time 2D/True3D mixing is helpful for 3D displays because the scenario of the contents can be easily changed on playback-time by adjusting the 3D effects and the motion of the True3D object interactively. In our system, True3D objects are rendered into multiple view-point images, which are composed with 2D contents by using depth information, and then they are multiplexed with pre-generated view masks. All the processes are performed on a graphics processor. We were still able to play a 2D/True3D mixed contents with Full HD resolution in real-time using a normal graphics processor.

• 한국표면공학회지
• /
• 제36권6호
• /
• pp.491-499
• /
• 2003

Copper-based leadframe sheets were oxidized in a hot alkaline solution to form brown-oxide layer on the surface and molded with epoxy molding compound (EMC). The brown-oxide-coated leadframe/EMC joints were machined to form sandwiched double-cantilever beam (SDCB) specimens and sandwiched Brazil-nut (SBN) specimens for the purpose of measuring the fracture toughness of leadframe/EMC interfaces. The SDCB and the SBN specimens were designed to measure the fracture toughness of the leadframe/EMC interfaces under nearly mode-I loading and mixed-mode (mode I ＋ mode II) loading conditions, respectively. Fracture surfaces were analyzed by various equipment such as glancing-angle XRD, SEM, AES, EDS and AFM to elucidate failure path. Results showed that failure occurred irregularly in the SDCB specimens, and oxidation time of 2 minutes divided the types of irregular failures into two classes. The failure in the SBN specimens was quite different from that in the SDCB specimens. The failure path in the SBN specimens was not dependent on the phase angle as well as the distance from tips of pre-cracks.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.85-93
• /
• 1994

The engine performance and combustion characteristics of diesel oil and fish oil blended with diesel oils were investigated at various blending rate of fish oil in a diesel engine. The maximum pressure showed no significant difference among test fuels at low load, but it was higher as the blending rate of fish oil increases at high load. Increasing the blending rate of fish oil, the rate of heat release and burned fraction were higher than those of diesel oil. The ignition delay became longer than that of diesel oil as the blending rate of fish oil increases, and its differences were larger at different loads. The combustion duration and density of smoke were shorter and lower as the blending rate of fish oil increases. The rate of fuel consumption showed no significant difference between diesel oil and fish blended with diesel oils.