• 국제물리치료학회지
• /
• 제11권2호
• /
• pp.2042-2051
• /
• 2020

Background: Many trials have been conducted the methods and types of intervention of form rollers, but no research has been done yet that mixes the methods and types of intervention. Objectives: To analyze the effects of myofascial release on the improvement of range of motion (ROM), flexibility, pain pressure threshold, and balance. Design: Randomized controlled trial. Methods: All subjects measured ROM, flexibility, pressure pain threshold, and dynamic balance by pre-test. After pre-test, subjects were randomized that static-vibration foam rolling group (n=12), dynamic-vibration foam rolling group (n=12), general foam rolling group (n=12). For the intervention, 3 sets of 90 seconds were applied to each group, and rest time was set to 60 seconds between sets. In the post-test and follow-up test after 10 minutes, all three groups were measured the ROM, flexibility, pressure pain threshold, and dynamic balance. Results: The results of comparing ROM, flexibility, pressure pain thresholds, dynamic balance ability appeared higher significant difference in the pre-post-10 minutes follow up test in comparison between time in the intragroup (P<.001). As a result of comparing the change of pre-post-10 minutes follow up, static vibration foam rolling showed higher significant difference compared to control groups (P<.001). Conclusion: Through this study, when foam rolling is applied within the same intervention time, static foam rolling can be expected to have a better effect than the existing dynamic foam rolling as well as vibration foam roller can expect better effect than general foam rolling.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.25-31
• /
• 2016

In this paper, a study on the development of OpenFOAM grid generation program for two-dimensional flow analysis is described. By using the pre-processor(eMEGA) of EDISON_CFD system, grids for OpenFOAM flow calculation were obtained. Resultant two-dimensional grids were used to calculate flow fields by applying simpleFoam, one of the OpenFOAM's popular solvers, and the obtained flow results were compared with theoretical and experimental data available. Also grids generated by present program were compared with grids by a commercial pre-processor Pointwise for the purpose of verification. Verification work includes three cases(single block, O-type single block, and multi block grid), and all results show reasonable matches. According to the current achievement, it can be concluded that OpenFOAM grid can be constructed conveniently by using eMEGA with GUI.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.199-200
• /
• 2023

This paper presents a study on the selection of optimal mix proportions for producing lightweight pre-foam concrete as a substitute for Autoclaved Lightweight Concrete (ALC) without the accelerated curing. The study was conducted using a rapid hardening binder made from by-products of the steel industry as the primary raw material. The experimental results established the optimal mix proportions, which included retarder content, water/binder ratio, foam content, and fiber inclusion amount, for the production of lightweight foam concrete. The optimal mix proportion was determined to have a retarder content at the minimum amount required to secure the working time, W/B of 35%, a foam content limited to 65% or less, and a fiber inclusion amount of 0.05% or less.

• 접착 및 계면
• /
• 제8권3호
• /
• pp.1-8
• /
• 2007

폴리우레탄 폼 소재에 평판형 플라즈마 전처리 방식을 적용시켜 접촉각 및 접착력을 향상시켰다. 플라즈마 반응기의 최적의 반응조건을 조사하기 위해서 반응가스(질소, 아르곤, 산소, 공기), 가스의 유량(30~150 mL/min), 그리고 반응시간(0~30초) 등을 변화시켜 전처리하여 진공식 플라즈마 방식과 비교 검토하였다. 처리 후 소재의 표면 변화는 SEM과 ATR-FTIR을 이용하여 측정하였다. 폴리우레탄 폼에서 질소의 유량이 100 mL/min이고 반응시간이 10초일 때 접촉각의 저하에 따른 가장 좋은 접착력의 결과를 보여 주었다. 결과적으로 평판형 플라즈마 조작 방식에 의한 처리로 폴리우레탄 폼의 접촉각과 접착박리강도가 개선되었음을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.123-125
• /
• 2011

Pre-foaming that has been used in this study is using to control and guarantee quality, but the optimum mix proportion and regulation are not definite. Therefore, this study investigated properties of foamed concrete according to concentrations of foaming agent to improve usability of foamed concrete. Synthetic foaming agent such as AES(Alkyl Ether Sulfate) and AOS(Alpha Olefin Sulfonate) are used to make foam with 1, 3, and 5% concentrations. We found that the flow of foam concrete increases when foam concentration is high and AES is more flowable than AOS. Density and compressive strength increase when foam concentration is low.

• 폴리머
• /
• 제32권5호
• /
• pp.433-439
• /
• 2008

고분자 소재에 평판형 플라즈마 전처리 방식을 적용시켜 polyurethane foam(density : 0.27)과 rubber (butadiene rubber) 소재 표면의 접촉각 및 접착력을 향상시켰다. 플라즈마 반응기의 최적의 반응조건을 조사하기 위해서 전처리기류(질소, 아르곤, 산소, 공기), 기류의 유량($30{\sim}100\;mL/min$), 그리고 전처리 시간($0{\sim}30\;s$) 등을 변화시켜 전처리하고 polyurethane foam의 경우 진공식 플라즈마처리 방식과 상호 비교하였다. 분위기 기류인 $N_2$의 유량을 100 mL/min로 설정 후 polyurethane foam은 10 s, rubber는 3 s 동안 전처리 했을 때 가장 높은 접착박리강도를 나타내었다. 전처리 후 소재의 표면 변화는 SEM과 ATR-FTIR을 이용하여 측정하였다. 결과적으로 평판형 플라즈마 조작 방식에 의한 처리로 소재 표면의 젖음성과 접착박리강도가 개선되었음을 확인하였다.

• The Journal of Korean Physical Therapy
• /
• 제35권4호
• /
• pp.89-94
• /
• 2023

Purpose: This study investigates the impact of self-myofascial release using a foam roller on the quadriceps femoris for pelvic stability. We further compare the effects of a GRID surface Foam Roller (GFR), a Non-Vibration Foam Roller (NVFR), and a Vibration Foam Roller (VFR). Methods: Thirty healthy adults (15 males, 15 females) participated in this study and were randomly assigned to one of three conditions: GFR, NVFR, or VFR. Participants walked at self-selected speeds with an arm sling before and after foam roller stretching. The analyzed gait parameters included pelvic tilt, pelvic obliquity, and pelvic rotation. Results: In the NVFR and VFR groups, there was a Significant differences were obtained in the pelvic tilt between pre-test and post-test values (p<0.05) in the NVFR and VFR groups, but no significant difference was observed in the GFR group (p>0.05). Comparing the amount of change between the three groups exhibited a significant decrease in pelvic tilt in the NVFR and VFR groups compared to the GFR group (p<0.017). No significant differences were found in pelvic obliquity and pelvic rotation (p>0.05) in all groups. Conclusion: While walking, the use of a VFR for self-myofascial release results in pelvic alteration by reducing the anterior pelvic tilt. We propose that a foam roller can be utilized to enhance pelvic stability during gait.

• 접착 및 계면
• /
• 제8권4호
• /
• pp.23-31
• /
• 2007

고분자 소재에 평판형 플라즈마 전처리 방식을 적용시켜 표면의 접촉각 및 접착력을 향상시켰다. 분위기 기류를 질소로 하고 유량을 30~100 mL/min, 반응시간은 0~30초로 하여 PU 소재를 주 물질로 하여 EVA foam, Leather (Action), Rubber, Unwoven 소재에 대하여 각 조건별로 플라즈마 처리시켜 처리 전후의 각 소재별 접촉각과 접착박리강도 측정을 통한 소재의 물성변화와, SEM분석을 이용한 처리 전후의 표면 변화를 측정하여 플라즈마 처리의 영향과 효과를 산출하였다. 대기압 평판형 플라즈마 반응기를 이용하여 최적 조건인 기체유량 100 mL/min, 전처리시간 10초에서 EVA foam, Leather (Action) 및 Rubber 소재의 접촉각 감소와 접착력 향상을 확인하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.247-249
• /
• 2011

Pre-foaming, one of the manufacturing way of foamed concrete, is influenced by foaming agent. When the foaming agent diluted with water, surface tension and viscosity are varied. Therefore, this study is reviewing the surface tension, viscosity and unit weight of foam by experimental factor such as foaming agent types(AES, AOS, VS FP) and foam agent dilution concentration (1, 3, 5%) and temperature of materials (5, 10, 20℃). As an expeimental result, the surface tension and viscosity slightly increased with increasing concentrations. Meanwhile, when increasing temperature, the viscosity has decreased. FP produce relatively stable foams only in case 3% or more, which produce unstable foams containing large amount of water content by decreasing only insignificant surface tension when diluted at concentration of 1%.

• 한국항공우주학회지
• /
• 제31권5호
• /
• pp.44-54
• /
• 2003

샌드위치 보의 포옴심재와 면재에 대한 물성치 실험을 통해 이들의 기계적 특성을 파악하였다. 이들로부터 포옴심재 및 적층면재로 제작된 샌드위치 보의 굽힘 국소좌굴현상을 고찰하였다. 좌굴전 양상을 고려한 굽힘 국소좌굴해석이 3점 굽힘시험을 통한 실험값에 더 근접함으로서 이를 고려한 굽힘 국소좌굴해석의 타당함을 보였고 그 양상도 고찰하였다.