• 한국지역사회생활과학회지
• /
• 제16권1호
• /
• pp.65-72
• /
• 2005

To increase dyeability of cotton fabric to the chestnut shell dyeing, we had several dyeing experiments with the experimental fabrics which was pre-treated by soybean, NaOH, KOH. Three kinds of experimental cotton fabrics were used and chestnut shell dyebath was made for the experiment. Munsell's color HV/C and color differences ΔE of dyeing fabrics were compared between pre-treatment and none pre-treatment dyeing fabrics. The main results were as follows ; Color differences of dyeing fabrics pre-treated with soybean, NaOH, KOH were higher than those of none pre-treated dyeing fabrics. In case of pre-treatment with soybean, the concentration of the soybean bath affected the color differences but not affected in case of pre-treatment with NaOH & KOH. Munsell's color of pre-treatment fabrics with soybean, NaOH, KOH were same with the none pre-treatment fabrics. Colorfastness of the pre-treated fabrics were same degree, but only in case of soybean pre-treated fabrics were low in fastness of washing(change) & perspiration(acidic change).

• 한국안전학회지
• /
• 제29권4호
• /
• pp.61-72
• /
• 2014

The aim of this study is to define the condition of optimal pre-treatment for preferable activated carbon fibers (ACFs), which are based on rayon fibers. This paper shows the ideal path of ACFs preparation process; implies that rayon fibers are pre-treated by various solvents with different times before the heating process. The pre-treated rayon fibers finally turned into desirable rayon fiber-based ACFs through optimal pre-treatment condition by heating processes. The thermal analysis method of pre-treated rayon fibers by thermo-gravimetry analyser (TGA) is an idealized tool, which analyzes the best thermal condition of pre-treatment process. Surface morphologies of resulting rayon fibers based ACFs were examined by scanning electron microscope(SEM). The results of TGA and SEM analyses show that the optimal pre-treatment condition for preparing ACFs was clearly defined, in terms of thermal stability and surface morphology.

• Journal of Oral Medicine and Pain
• /
• 제23권3호
• /
• pp.263-270
• /
• 1998

Considering various factors contributing oral malodor, the accurate prediction of prognosis is very important to both clinician and patients. The present study has been performed to invetigate the relationship between treatment effeicacy and pre-treatment volatile sulfur compounds (VSC) level. Ninety patients were divided into three groups, A(<150ppb), B(150< <200ppb), and C(>200ppb) groups, according to pre-treatment VSC level detected by Halimeter, and each group included 30 patients. Routine therapeutic measures for oral were provided to each patient which consisted of oral prophylaxis, tooth brushing and flossing instruction, tongue scraping by proper device, and gargling of 0.25% ZnCl2 Solution. The group with high pre-treatment VSC level (>150ppb) showed significant reduction of VSC level at 1 and 3 weeks after. However, the group with low pre-treatment VSC level (<150ppb) did not show any significant reduction during the experimental periods. Collectively, the results suggested that patients with high pre-treatment VSC level show better prognosis.

• 한국염색가공학회지
• /
• 제31권2호
• /
• pp.88-97
• /
• 2019

In this study, when printed on a nylon material, the color strength and fastness are lower than that of a polyester material, and the nylon material shrinks due to heat and pressure, resulting in poor design and poor compatibility. To overcome this problem, we investigated the possibility of transfer DTP by adding pre-treatment process to nylon transfer DTP process. For the basic study of pre-treatment preparation, we used pure nylon material which is not compounded and dispersion ink and transfer paper applied to existing PET transfer DTP. Pre-treatment preparations were classified into three types of acryl-base polymer and pre-treated with nylon and then applied to transfer DTP to confirm their color strength and fastness. The color strength of the pre-treated nylon material increased and poly-methyl-acrylate amulsion pre-treatment showed the best color at $210^{\circ}C$, 1.5m/min and 0.3MPa. The nylon material pre-treated with washing, friction, and light fastness was judged to be more excellent and stable.

• 한국표면공학회지
• /
• 제54권4호
• /
• pp.184-193
• /
• 2021

This study demonstrates formation behavior and morphological changes of PEO (Plasma Electrolytic Oxidation) films on AZ91 Mg alloy as a function of pre-treatment time in 1 M HF solution at 25 ± 1 ℃. The electrochemical behavior and morphological changes of AZ91 Mg alloy in the pre-treatment solution were also investigated with pre-treatment time. The PEO films were formed on the pre-treated AZ91 Mg alloy specimen by the application of anodic current 100 mA/cm² of 300 Hz AC in 0.1 M NaOH + 0.4 M Na₂SiO₃ solution. Vigorous generation of hydrogen bubbles were observed upon immersion in the pre-treatment solution and its generation rate decreased with immersion time. It was also found that 𝛽-Mg₁₇Al₁₂ in AZ91 Mg alloy was dissolved and a protective thin film of MgF₂ was formed on the AZ91 Mg alloy surface during the pre-treatment process in the 1 M HF solution. PEO film did not grow on the AZ91 Mg alloy specimen when the surface was not pre-treated and irregular PEO films with nodular defects were formed for the specimens pre-treated up to 1 min. Uniform PEO films were formed when the AZ91 Mg alloy specimen was pre-treated more than 3 min. The growth rate of PEO films on AZ91 Mg alloy increased significantly with increasing pre-treatment time.

• 열처리공학회지
• /
• 제17권5호
• /
• pp.278-282
• /
• 2004

Effect of pre-treatment on the gas nitriding process of austenitic stainless steels has been investigated and the following results were obtained. Minimum pre-treatment time was decreased to 5min with increasing treatment temperature from $200^{\circ}C$ to $600^{\circ}C$. Surface activation effect by the pre-treatment was maintained in the air up to holding time of 64hr, judging from the analysis result of gas nitrided specimens. The Depth of nitrided layer of STS 304 and 316 stainless steels were ranged from $5{\mu}m$ to $90{\mu}m$ at $440^{\circ}C{\sim}600^{\circ}C$. The X-ray diffraction intensity for austenitic stainless steels were increases as nitriding temperature from $440^{\circ}C$ to $600^{\circ}C$.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.655-659
• /
• 2005

Pre-filter system that was consisted of wasted-tire, non-woven fabrics, and sponge was developed as a primary treatment process prior to rainwater reservation or a pre-treatment process of rainwater reuse system for reclamation. By using this system, SS concentration, TOC, COD, and turbidity could decreased by 86.7%, 62.6%, 69.1% and 66.5%, respectively. From the results of particle size distribution of treated water, the particles over than $30{\mu}m$ of diameter were completely removed by pre-filter system. But 90% of particles less than $20{\mu}m$ of diameter were passed through pre-filter. Optimal depth of wasted-tire and non-woven fabrics were 15cm and 2.4cm, respectively. Pre-filter system was considered as an effective alternative for pre-treatment of rainwater including non-point pollutants and it could be also applied for the treatment of combined sewer overflow (CSO).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.370-373
• /
• 1999

Si direct bonding (SDB) technology is very attractive for both Si-on-insulator(SOI) electric devices and MEMS applications because of its stress free structure and stability. This paper presents on- pre treatment conditions in Si wafer direct bonding, The paper resents on pre-bonding according to HF pre-treatment conditions in Si wafer direct bonding. The characteristics of bonded sample were measured under different bonding conditions of HF concentration, applied pressure and annealing temperature(200~ 100$0^{\circ}C$) after pre-bonding. The bonding strength was evaluated by tensile strength method. The bonded interface and the void were analyzed by using SEM and IR camera, respectively, Components existed in the interlayer were analyzed by using FT-IR. The bond strength depends on the HF pre-treatment condition before pre-bonding(Min 2.4kgf/$\textrm{cm}^2$~ Max : 14.kgf/$\textrm{cm}^2$)

• 펄프종이기술
• /
• 제42권4호
• /
• pp.1-14
• /
• 2010

To investigate natural dyeing properties of bast fiber, properties of pre mordanting dyeing of sappan wood, gardenia and gallnut such as K/S values, developed color, and fastness were evaluated. Silk showed the most increased K/S values by pre mordanting treatment when Fe was uses as a mordant. The optimized amount of Fe was 3%. The colors of sappan wood was a series of YR. After pre mordanting treatment with Fe, the colors of bast fiber of mulberry and silk showed a series of RP, and the color of cotton showed a series of Y. The color of gallnut was a series of Y regardless of pre mordant treatment. Sappon wood (YR), gardenia (Y), and gallnut (Y) showed various colors such as YR, R, and RP, respectively. Sunlight fastness was not improved by pre mordanting treatment. The effect of pre mordanting treatment was not good. Especially the treatment with Al showed poor sunlight fastness.

• 한국염색가공학회지
• /
• 제23권2호
• /
• pp.69-75
• /
• 2011

A pre-treatment process has been developed for natural dyeing of wool by which the dyed materials have been imparted antimicrobial efficacy against both gram-positive and gram-negative bacteria durable up to 20 washes. In this process, wool fabrics were treated with citric acid under oxidizing condition prior to dyeing. The treated fabrics were then dyed with four different types of natural dye powders obtained from leaves of silver oak, wattle, tanner's senna and flame of forest. All the natural dyes produced yellowish brown colour on wool fabrics. The washing and light fastness properties of the fabrics subjected to pre-treatment were one grade higher compared to those of the dyed fabrics without pre-treatment. The pre-treated wool fabrics showed antimicrobial efficacy against both gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). The fabrics dyed without pre-treatment showed antimicrobial efficacy against gram-positive bacteria (Staphylococcus aureus) only. The durability of antimicrobial efficacy was higher in pre-treated and dyed wool fabrics compared to the dyed fabrics without pre-treatment.