• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.02a
• /
• pp.55-55
• /
• 1999

• Proceedings of the Korean Vacuum Society Conference
• /
• 1992.07a
• /
• pp.43-44
• /
• 1992

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.6
• /
• pp.645-651
• /
• 2015

Numerical study on human thermal comfort in a low floor bus has been conducted. Human thermal comfort in a bus depends mainly on air temperature, air velocity, mean radiant temperature, humidity, and direct solar flux, as well as the level of activity and thermal properties of clothing. The paper presents the velocity and temperature distribution, Predicted Mean Vote (PMV) and Predicted Percentage of Dissatisfied (PPD) indices for the driver and passengers.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.589-591
• /
• 2004

In this paper, we developed a laser distance measurement(LDM) system based on DSP. We applied PPD(Pulsed Phase Detection) algorithm to the LDM system. The PPD algorithm calculate the distance from the LDM system to the object by using phase detection. Reference waveform at a fixed frequency is sampled by both the inner-loop and outer-loop pulse signal. The LDM system detects the difference of phase between the sampled signals. We obtained an accuracy of ${\sigma}=25.5mm$ from the LDM system.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.85-86
• /
• 2008

케이블의 원가절감을 위해 절연체의 절연두께를 줄이거나 초초고압화가 되어 갈수록 절연성능의 신뢰성 향상이 한층 요구되고 있다. 이를 위해 케이블 및 접속함의 절연체 내에 각종의 결함이 어느 정도 절연성능을 떨어뜨리는지 정량적으로 파악하여 개선할 필요가 있다. 또한 완제품 내 잔족하고 있는 이물의 종류 및 위치를 알 수 있으면 생산공정 내에서 이물 유입 경로를 파악하여 이물이 유입되는 것을 차단할 수 있다. AC내전압 파괴시험을 수행할 때 설계치 보다 저전계에서 파괴될 경우 파괴공을 조사하여 원인을 규명하고자 하지만 국부적인 결함으로 인한 파괴는 결함부를 소실시키기 때문에 파괴공 및 주위의 절연체를 현미경으로 관찰하여도 찾기가 어렵다. 따라서, 전원을 고속으로 차단하여 결함부가 완전히 소손되는 것을 막고 PD발생 위치를 추정하여 결함을 확인하는 방법이 요구 되어진다. 이러한 시험 방법을 전구차단법 이라고 하며, 고도의 PD측정기술과 판정기술이 필요한 종합적인 기술이다. 본 논문에서는 PPD 기술의 핵심인 노이즈 제거 기술과 판별기술을 서술하고 실제 접속함(PMJ)에 적용하여 PPD 기술의 유효함을 증명하였다.

• Asian Journal of Turfgrass Science
• /
• v.6 no.1
• /
• pp.23-28
• /
• 1992

Urea, the major N source of world agriculture involves a serious urea-N loss through NH$_3$volatilization. Approaches to decrease N loss include using urease inhibitors in view of the environmental protection and the increase of urea-N efficiency. The purpose of laboratory researches was toassess the potential value of urease inhibitors to increase urea-N efficiency in soil and Kentucky blue-grass(Poa Pratensis L.) turf. The activity of urease inhibitors Phenyiphosphorodiamjdate(ppD) and N-(n-butyl) thiophosphoric triamjde(NBPT) measured to break-down ammonia volatilization. The soil and turf used in this project were from the fairway in one of the Korean gof course. The researches were carried out for two weeks to measure the urease activities on urea hydrolysis under four temperatures (10~ 40$^{\circ}C$) and for one week on turfgrass using forced-draft system. Results indicated that Urea-N involves considerable loss through gaseous NH$_3$ by urease activities in plant-soil systems. Urease inhibitors PPD and NBPT have potential value for increasing N use efficiency by reduing NH$_3$ volatilization. NBPT deserves futher evaluation as fertilizer amendment than PPD use of urea in turf industries.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.269-272
• /
• 1997

The Lithium ion secondary battery has been developed for high energy density of portable electrical device and electronics. Among the many conductive polymer materials, the positive active film for Li polymer battery system was synthesized successfully from polyphenylene diamine(PPD) by chemical polymerization in our lab. And PPD-DMcT(2, 5-dimercapto-1, 3, 4-thi-adiazole) composite flim conductive material, at high temperature was also prerared with the addition of dimethylsulfoxide(DMSO). The surface morphology and thermal stability of prepared composite flim was carried out by using SEM and TGA, respectively. Electrochemical and electrical conductivity of composite flim were also discussed by cyclic voltammetry and four-probe method in dry box(<27pm). And the electrode reaction mechanism was detected and analyzed from the half cell unit battery system.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2017.10a
• /
• pp.67-72
• /
• 2017

This paper presents on the evaluation of thermal comfort in office on offshore. In living quarter of offshore, strict air conditioning performance is required to office on offshore and displacement ventilation is applied to office space which rooms are required to confirm the thermal environment. The computational fluid dynamics (CFD) is performed to calculate the temperature, air velocity in office and thermal comfort such as PPM & PPD is evaluated by the CFD result.

• Proceedings of the Korean Fiber Society Conference
• /
• 1987.06b
• /
• pp.12-12
• /
• 1987

To improve the fibrillation phenomenon and processibili to of poly(p-phenyleneterephthalamide) (PPD-T) , a P/E copolyamide was prepared by introducing 4,4'-ethylene dianiline (EDA) into rigid chain backbone. The effects of semi-flexible segment on the liquid crystalline properties were investigated. The EDA, used as a comonomer, was prepared by catalylitic reduction of p,p'-dinitrophenyl , obtained by oxidative coupling of p,p'-dinitrotoluene. Various high molecular weight PIE copolyamides were prepared by low temperature solution polycondensation of terephthaloyl chloride (TPC) with various mixtures of p-phenylene diamine (PPD) and EOA. The PfE copolyamides were completely dissolved in 100% svlfuric acid, and the phase transition of P/E copolyamide-sulfuric acid systems was examined in teams of concentration and temperature. Over the chemical compositions, PIE=911, 812, and 713, solutions of anisotropic single phase were acquired. In particular, the two mixing ratios, 911 and 812, gave a good anisotropic spinning dope.

• KIEAE Journal
• /
• v.14 no.3
• /
• pp.31-38
• /
• 2014

The purpose of this study is to analyse PMV (Predicted Mean Vote) and PPD (Predicted Percentage of dissatisfied) by automatic control of slat-type vertical blind. EnergyPlus, a building energy analysis software has been used for this study. The energy model is calibrated in Energy Plus using measured zone temperature and glass surface temperature data for one day and thermal comfort performance inside the building analysis was carried out. The calibrated data has the MBE of 4% and Cv(RMSE) of 10%. The result was that, for better zone thermal comfort, installation of blind on the outside is more appropriate than inside or no blind case. Additionally, different glazing types were compared and it was found that Triple Low-e glass is the most favorable.