• 콘크리트학회논문집
• /
• 제27권2호
• /
• pp.127-136
• /
• 2015

본 연구는 고강도 고함량 고로슬래그 콘크리트의 특성에 미치는 석회석 미분말과 실리카퓸의 영향을 검토하기 위해 50%에서 최대 80%까지 고로슬래그를 다량 혼합하고, 석회석 미분말을 최대 20%, 실리카퓸을 최대 10%까지 혼합한 물-결합재비 20%의 고강도 시멘트 모르터의 유동성, 강도발현, 수화 및 포졸란 반응 특성, 공극율 및 공극 크기 분포 등을 분석하였다. 실험결과에 따르면 고함량 고로슬래그 배합은 포틀랜드 시멘트 배합에 비해 고로슬래그의 낮은 표면 마찰로 유동성이 크게 향상되고, 시멘트 수화에 필요한 자유수가 많아져 수화반응이 촉진되면서 초기강도가 증가하나, 너무 낮은 물-결합재비와 단위시멘트량으로 인해 수산화칼슘의 생성량이 부족하여 포졸란 반응이 충분히 활성화되지 못함에 따라 장기강도 발현이 억제된다. 석회석 미분말은 유동성에는 큰 영향을 주지 않고, 역시 시멘트의 초기 수화를 촉진하는 것으로 나타났으나, 수화를 가속하는 효과는 고로슬래그보다 높지 않고, 고로슬래그와 달리 수경성이 없기 때문에 오히려 석회석 미분말의 치환율이 높아질수록 압축강도가 낮아지는 것으로 나타났다. 또한 고분말의 고로슬래그를 사용하거나, 또는 실리카퓸으로 고로슬래그를 치환하는 경우 시멘트 수화에 필요한 자유수를 더 많이 흡착함으로써 유동성과 강도를 저하시키는 것으로 나타났다. 또한 고로슬래그를 사용한 배합의 공극율이 보통 포틀랜드 시멘트 배합보다 낮게 나타났으나, 석회석 미분말은 공극율에 뚜렷한 영향을 나타내지 않았고 실리카퓸은 낮은 시멘트 수화도로 인해 공극율을 오히려 증가시키는 것으로 나타났다. 반면 공극 크기 분포에 있어서는 고로슬래그와 실리카퓸를 혼합한 경우 미세공극이 증가하는 것으로 나타났다.

• Computers and Concrete
• /
• 제14권2호
• /
• pp.175-191
• /
• 2014

In recent years, the emergence of nanotechnology and nanomaterial has created hopes to improve various properties of concrete. Nano silica as one of these materials has been introduced as a cement replacement material for concrete mixture in construction applications. It can modify the properties of concrete, due to high pozzolanic reactions and also making a denser microstructure. On the other hand, it is well recognized that the use of mineral admixtures such as silica fume affects the mechanical properties and durability of cementitious materials. In addition, the superior performance of self-consolidating concrete (SCC) and self-consolidating mortars (SCM) over conventional concrete is generally related to their ingredients. This study investigates the effect of nano silica and silica fume on the compressive strength and chloride permeability of self-consolidating mortars. Tests include compressive strength, rapid chloride permeability test, water permeability, capillary water absorption, and surface electrical resistance, which carried out on twenty mortar mixtures containing zero to 6 percent of nano silica and silica fume. Results show that SCMs incorporating nano silica had higher compressive strength at various ages. In addition, results show that nano silica has enhanced the durability SCMs and reduced the chloride permeability.

• Advances in concrete construction
• /
• 제14권5호
• /
• pp.341-354
• /
• 2022

Treatment of solid waste building materials is a crucial method of disposal and an area of ongoing research. New standards for the treatment of solid waste building materials are necessary due to multisource features, huge quantities, and complicated compositions of solid waste. In this research, sustainable nanomaterial mixtures containing nano-paper waste (NPW) and nano-metakaolin (NMK) were used as a substitute for Portland cement. Portland cement was replaced with different ratios of NPW and NMK (0%, 4%, 8%, and 12% by weight of cement) while the cement-to-water ratio remained constant at 0.4 in all mortar mixtures. The fresh properties had a positive effect on them, and with the increase in the percentage of replacement, the fresh properties decreased. The results of compressive strength at 7 and 28 days and flexural strength at 28 days show that the nanomaterials improved the strength, but the results of NMK were better than those of NPW. The best replacement rate was 8%, followed by 4%, and finally 12% for both materials. The combination of NMK and NPW as a replacement (12% NMK + 12% NPW) showed less shrinkage than the others because of the high pozzolanic reactivity of the nanomaterials. The combination of NMK and NPW improved the microstructure by increasing the hydration volume and lowering the water in the cement matrix, as clearly observed in the C-S-H decomposition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.529-532
• /
• 2006

This paper presents results from creep and shrinkage tests performed on different High Strength Concrete (HSC) mixes (with compressive strengths up to 90 MPa). Results were compared with those from various Code prediction models. The effects of pozzolanic materials on the creep and shrinkage were also investigated. Results show that while fly ash increases the compressive creep of concrete, silica fume decreases it. Moreover, current creep and shrinkage prediction models need to be revised for the HSC mixture.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.58-61
• /
• 2003

This paper investigated the chloride invasion resistance properties of concrete containing mineral admixtures(pozzolanic materials such as fly-ash, ground granulated blast-furnace slage, silica fume and meta kaolin) for each replacement ratios under W/B ratios ranged from 40% to 55%. For the electrical migration test, Tang and Nilsson's method was used to estimate the migration coefficient of chloride ion. As a result, the migration coefficients of chloride ion of concrete containing mineral admixtures were shown reducing with the use of mineral admixtures, and the compressive strength was shown related to the migration coefficient. From the correlation between compressive strengths and migration coefficients, the kind and replacement ratio of mineral admixtures have a great effect on migration coefficients below 50㎫.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.308-314
• /
• 1997

Shrinkage and creep are the fundamental properties of concrete. These long term deformations can be seen as bothersome(increased deflection) or can be seen as reduction of compressive stress of prestressed concrete. Steel fibers advance the mechanical properties of concrete:tensile strength, ductility, flexural strength, fracture toughness, and post-cracking resistance, etc...Silica fume is pozzolanic material which combines with hydrated lime to generate silicate materials which increase the compressive strength and reduce somewhat the creep of concrete. This paper is the result of the long-term deformation by silica fume and steel fibers with varying percentages.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.477-480
• /
• 2005

The discharge of sewage sludge is rapidly increasing in Korea. But the most common sewage sludge disposal alternative is to incinerate and to deposit it in controlled landfills. However, space limitations on existing landfill sites, and increasing environmental concerns have prompted the investigation of alternative ash disposal routes. The utilization of sewage sludge ash would contribute to the elimination of an environmental problem and to the development of new high-performance materials. The purpose of this study is to apply to Alkali Activation into solidification of sewage sludge ash. It achieves leaching test, chemical composition and compressive strength test. As a result of tests, the sewage sludge ash has sufficient potential for use of pozzolanic raw material. However, it is judge to be available to construction material if research is continuously gone.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.30-31
• /
• 2017

The objective of this study is to evaluate the performance of polymer-modified surface preparation mortars with pozzolanic materials for corrosion prevention method in deteriorated sewage treatment structures. The prepackaged-type surface preparation mortars are prepared with a polymer-binder ratio of 10%, ground granulated blast furnace slag contents of 0, 15, 30%, a fly ash content of 15%. And, the specimens are tested for workability, adhesion in tension, water absorption, crack and impact resistance. As a result, the prepackage-type surface preparation mortars for sewage treatment structure are satisfied with quality requirements by KS F 4716, Japan sewage work agency(JS) and JIS A 6916 for surface preparation mortars.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.151-152
• /
• 2020

When concrete is exposed to fire, the thermal decomposition of hydrates of Portland cement paste results in critical damage to the concrete structure of a building. Recently, nanosilica arose as the effective nano-additive which can enhance the thermal resistance of the cementitious materials. However, the mechanism of the enhancement was not elucidated specifically. In this study, we investigated the properties of calcium silicate hydrates(C-S-H)of the nanosilica incorporated cement paste after heating to different heating temperatures (200℃, 500℃, and 800℃) by 29Si nuclear magnetic resonance. The results showed that the polymerization of C-S-H of nanosilica incorporated samples was larger than ordinary cement paste after heating to 200℃, and C-S-H formed during heating process to 500℃ due to the pozzolanic reaction during heating process.

• Computers and Concrete
• /
• 제12권6호
• /
• pp.755-774
• /
• 2013

Considering the well known environmental issues of cement manufacturing (direct and indirect levels of $CO_2$ emissions), clinker replacement by supplementary cementing materials (SCM) can be a very promising first step in reducing considerably the associated emissions. However, such a reduction is possible up to a particular level of SCM utilization, influenced by the rate of its pozzolanic reaction. In this study a (4-step) structured methodology is proposed in order to be able to further adjust the concrete mix design of a particular SCM, in achieving additional reduction of the associated levels of $CO_2$ emissions and being at the same time accepted from a derived concrete strength and service life point of view. On this note, the aim of this study is twofold. To evaluate the environmental contribution of each concrete component and to provide the best possible mix design configuration, balanced between the principles of sustainability (low environmental cost) and durability (accepted concrete strength and service life ). It is shown that such a balance can be achieved, by utilising SCM by-products in the concrete mix, reducing in this way the fixed environmental emissions without compromising the long-term safety and durability of the structure.