• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.535-542
• /
• 2005

This paper proposes an on-demand ad hoc routing protocol, Node Density Based Routing (NDBR), which enhances the routing performance applying a new method to establish alternate patlis. It is important to reserve alternate paths for the route from source to destination in mobile ad hoc networks that are susceptible to failure due to the movement or the power exhaustion of mobile nodes. NDBR aims to establish a route that contains more alternate paths toward the destination by involving intermediate nodes with relatively more adjacent nodes in a possible route, and introduces a new routing criterion called 'node density.' This approach can localize the effects of route failures, and reduce control traffic overhead and route reconfiguration time by enhancing the reachability to the destination node without source-initiated route re-discoveries at route failures. This paper describes the route setup procedure using node density and the route re-configuration procedures employing alternate path information at the intermediate nodes. We show the performance of our routing schemes through a series of simulations using the Network Simulator 2 (ns-2).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.224-242
• /
• 2010

Data routing in wireless sensor networks must be energy-efficient because tiny sensor nodes have limited power. A cluster-based hierarchical routing is known to be more efficient than a flat routing because only cluster-heads communicate with a sink node. Existing hierarchical routings, however, assume unrealistically large radio transmission ranges for sensor nodes so they cannot be employed in real environments. In this paper, by considering the practical transmission ranges of the sensor nodes, we propose a clustering and routing method for hierarchical sensor networks: First, we provide the optimal ratio of cluster-heads for the clustering. Second, we propose a d-hop clustering scheme. It expands the range of clusters to d-hops calculated by the ratio of cluster-heads. Third, we present an intra-cluster routing in which sensor nodes reach their cluster-heads within d-hops. Finally, an inter-clustering routing is presented to route data from cluster-heads to a sink node using multiple hops because cluster-heads cannot communicate with a sink node directly. The efficiency of the proposed clustering and routing method is validated through extensive simulations.

• Journal of Communications and Networks
• /
• v.16 no.4
• /
• pp.363-370
• /
• 2014

Despite several years of intense research, the security and cryptography in wireless sensor networks still have a number of ongoing problems. This paper describes how identification (ID)-based node authentication can be used to solve the key agreement problem in a three-layer interaction. The scheme uses a novel security mechanism that considers the characteristics, architecture, and vulnerability of the sensors, and provides an ID-based node authentication that does not require expensive certificates. The scheme describes the routing process using a simple ID suitable for low power and ID exposure, and proposes an ID-based node authentication. This method achieves low-cost communications with an efficient protocol. Results from this study demonstrates that it improves routing performance under different node densities, and reduces the computational cost of key encryption and decryption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.9
• /
• pp.4272-4286
• /
• 2016

In resource constrained sensor networks, usage of efficient routing protocols can have significant impact on energy dissipation. To save energy, we propose an energy efficient routing protocol. In our approach, which integrates clustering and routing in sensor networks, we perform network coding during data routing in order to achieve additional power savings in the cluster head nodes. Efficacy of the proposed method in terms of the throughput and end-to-end delay is demonstrated through simulation results. Significant network lifetime is also achieved as compared with other techniques.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.365-368
• /
• 2008

This paper presents a new concept of IP-based wireless sensor networks and also introduces a routing protocol that is based on clustering for global healthcare information system. Low-power wireless personal area networks (LoWPANs) conform the standard by IEEE 802.15.4-2003 to IPv6 that makes 6lowpan. It characterized by low bit rate, low power, and low cost as well as protocol for wireless connections. The 6lowpan node with biomedical sensor devices fixed on the patient body area network that should be connected to the gateway in personal area network. Each 6lowpan nodes have IP-addresses that would be directly connected to the internet. With the help of IP-address service provider can recognize or analysis patient biomedical data from anywhere on globe by internet service provider equipments such as cell phone, PDA, note book. The system has been evaluated by technical verification, clinical test, user survey and current status of patient. We used NS-2.33 simulator for our prototype and also simulate the routing protocols. The result shows the performance of biomedical data packets in multi-hope routing as well as represents the topology of the networks.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2010

Recently, wireless sensor networks(WSNs) technology has been considered as one of the most critical issues in the ubiquitous computing age. The sensor nodes have limited battery power, so they should consume low energy through their operation for the long-lasting lifetime. Therefore, it is essential to use energy efficient routing protocol. For this, we propose a location-based energy-efficient routing protocol which constructs the energy efficient route by considering the quantity of Energy consumed. In addition, we propose a route reconstruction algorithm to handle the disconnection of message transmission. Finally, we show from performance analysis using TOSSIM that our protocol outperforms the existing location based routing protocols in terms of energy efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.412-421
• /
• 2011

An economic ship routing means to sail a ship with a goal of minimizing the fuel consumption by utilizing weather forecast information, and many such systems have been recently developed. Most of them assume that sailing is carried out with a constraint like a fixed output of engine-power or a fixed sailing speed. However, if the output of engine-power is controlled, it is possible to reduce the fuel consumption by sailing a ship under a relatively good weather condition. In this paper, we propose a novel economic ship routing system which can search optimal outputs of the engine-power for each part of a path by employing an evolutionary strategy. In addition, we develope an $A^*$ algorithm to find the shortest path and a method to enhance the degree of curve representation. These make the proposed system applicable to an arbitrary pair of departure and destination points. We compared our proposed system with another existing system not controlling output of the engine-power over 36 scenarios in total, and observed that the former reduced the estimated fuel consumption than the latter by 1.3% on average and the maximum 5.6% with little difference of estimated time of arrival.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1630-1642
• /
• 2016

Inter-domain routing is the most critical function of the Internet. The routing system is a logical network relying on the physical infrastructure with geographical characteristics. Nature disasters or disruptive accidents such as earthquakes, cable cuts and power outages could cause regional failures which fail down geographically co-located network nodes and links, therefore, affect the resilience of inter-domain routing system. This paper presents a model for regional failures in inter-domain routing system called REFER for the first time. Based on REFER, the resilience of the inter-domain routing system could be evaluated on a finer level of the Internet, considering different routing policies of intra-domain and inter-domain routing systems. Under this model, we perform simulations on an empirical topology of the Internet with geographical characteristics to simulate a regional failure locating at a city with important IXP (Internet eXchange Point). Results indicate that the Internet is robust under a city-level regional failure. The reachability is almost the same after the failure, and the reroutings occur at the edge of the Internet, hardly affecting the core of inter-domain routing system.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.359-366
• /
• 2016

Today's multi-core technology rapidly increases with more and more Intellectual Property cores on a single chip. Network-on-Chip (NoC) is an emerging communication network design for SoC. For efficient on-chip communication, routing algorithms plays an important role. This paper proposes a novel multicast routing technique entitled as Docket NoC (Dt-NoC), which eliminates the need of routing tables for faster communication. This technique reduces the latency and computing power of NoC. This work uses a CURVE restriction based algorithm to restrict few CURVES during the communication between source and destination and it prevents the network from deadlock and livelock. Performance evaluation is done by utilizing cycle accurate RTL simulator and by Cadence TSMC 18 nm technology. Experimental results show that the Dt-NoC architecture consumes power approximately 33.75% 27.65% and 24.85% less than Baseline XY, EnA, OEnA architectures respectively. Dt-NoC performs good as compared to other routing algorithms such as baseline XY, EnA, OEnA distributed architecture in terms of latency, power and throughput.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.357-364
• /
• 2014

The first mission for the IoT based hyper-connectivity communication is developing a device-to-device communication technique in infra-less low-power and lossy networks. In a low-power and lossy wireless network, IoT devices and routers cannot keep the original path toward the destination since they have the limited memory. Different from the previous light-weight routing protocols focusing on the reduction of the control messages, the proposed scheme provides the light-weight IPv6 address auto-configuration, IPv6 neighbor discovery and routing protocol in a IoT capable infra-less wireless networks with the bloom filer and enhanced rank concepts. And for the first time we evaluate our proposed scheme based on the modeling of various probability distributions in the IoT environments with the lossy wireless link. Specifically, the proposed enhanced RPL based light-weight routing protocol improves the robustness with the multi-paths locally established based on the enhanced rank concepts even though lossy wireless links are existed. We showed the improvements of the proposed scheme up to 40% than the RPL based protocol.