• Spatial Information Research
• /
• v.18 no.4
• /
• pp.75-88
• /
• 2010

Recent development in wireless communication and mobile positioning technologies make geosensor networks widely used in the various fields of real world. As a result, much research has been done on the middleware that uses limited energy resources efficiently. However, because traditional middleware does not consider the characteristics of sensor node, such as computing power and specification, the existing middleware call not support the sensor nodes with only the restricted system resource. Therefore, in this paper, we design and implement a new Bytecode based Data Service Middleware supporting energy efficiency in geosensor networks. At first, the proposed middleware provides the optimized functions for sensor nodes by using minimum by tee ode instruction set and data manager supporting hardware abstraction. Secondly, the proposed middleware increases the energy efficiency of sensor node through both data aggregation query processing and data filtering that minimize data transmission by eliminating unnecessary data. Finally, we show from our performance analysis that the proposed middleware is more energy efficient than the existing SwissQM.

• Journal of the Korea Society for Simulation
• /
• v.21 no.2
• /
• pp.51-58
• /
• 2012

In IEEE 802.16j MMR protocol, two modes about usage of RS are proposed; one is transparent mode to enhance data throughput and the other is non-transparent mode to extend coverage. In this paper, we focus on non-transparent mode and find that the mode can also improve data throughput. Therefore, we analyze data throughput on various RS topology and their extended coverage area by simulation in IEEE 802.16j non-transparent mode. We also compare the simulation results with the single MR-BS system of which coverage is extended by higher transmission power. From the comparisons of simulation results, we see that higher throughput can be obtained in the proposed non-transparent mode.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.113-119
• /
• 2008

Conventional 1-1-1 cooperative protocol offers path-loss gain as advantage of multi-hop and spatial diversity which is equivalent to MIMO system. This protocol is enable to get higher reliability and reduction of power consumption than those of the single-hop or multi-hop. But the 1-1-1 cooperative protocol get only the diversity order 2 and limited path-loss reduction gain because this protocol has a single cooperative relay. We propose 1-2-1 cooperative protocol using two cooperative relays R1, R2. The 1-2-1 cooperative protocol can improve path-loss reduction and increase diversity order 3. Moreover, the cooperative relay R2 attains diversity order 2. The signaling method in transmission uses DF (Decode and Forward) or DR (Decode and Reencode) and 1-2-1 DF/DR cooperative protocol are applied to clustering based wireless sensor networks (WSNs). Simulations are performed to evaluate the performance of the protocols under Rayleigh fading channel plus AWGN (Additive White Gaussian Noise).

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.160-160
• /
• 2010

Organic electronic devices require a passivation layer to ensure sufficient lifetime. Specifically, flexible organic electronic devices need a barrier layer that transmits less than $10^{-6}\;g/m^2/day$ of water and $10^{-5}\;g/m^2/day$ of oxygen. To increase the lifetime of organic electronic device, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. In this study, the passivation layer was deposited using single-process PEALD. The passivation layer, in our case, was a bilayer system consisting of $Al_2O_3$ films and a $TiO_2$ buffer layer on a poly (ether sulfon) (PES) substrate. Because the deposition temperature and plasma power have a significant effect on the properties of the passivation layer, the characteristics of the $Al_2O_3$ films were investigated in terms of density under different deposition temperatures and plasma powers. The effect of the $TiO_2$ buffer layer also was also addressed. In addition, the water vapor transmission rate (WVTR) and organic light-emitting diode (OLEDs) lifetime were measured after forming a bilayer composed of $Al_2O_3/TiO_2$ on a PES substrate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.127-127
• /
• 2011

We investigate the transparent TFTs using a transparent ZnSnO3 (ZTO)/Ag/ZTO multilayer electrode as S/D electrodes with low resistivity of $3.24{\times}10^{-5}$ ohm-cm, and high transparency of 86.29% in ZTO based TFTs. The Transparent TFTs (TTFTs) are prepared on glass substrate coated 100 nm of ITO thin film. On atomic layer deposited $Al_2\;O_3$, 50 nm ZTO layer is deposited by RF magnetron sputtering through a shadow mask for channel layer using ZTO target with 1 : 1 molar ratio of ZnO : $SnO_2$. The power of 100W, the working pressure of 2mTorr, and the gas flow of Ar 20 sccm during the ZTO deposition. After channel layer deposition, a ZTO (35 nm)/Ag (12 nm)/ZTO(35 nm) multilayer is deposited by DC/RF magnetron sputtering to form transparent S/D electrodes which are patterned through the shadow mask. Devices are annealed in air at 300$^{\circ}C$ for 30 min following ZTO deposition. Using UV/Visible spectrometer, the optical transmittances of the TTFT using ZTO/Ag/ ZTO multilayer electrodes are compared with TFT using Mo electrode. The structural properties of ZTO based TTFT with ZTO/Ag/ZTO multilayer electrodes are analyzed by high resolution transmission electron microscopy (HREM) and X-ray photoelectron spectroscopy (XPS). The transfer and output characterization of ZTO TTFTs are examined by a customized probe station with HP4145B system in are.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5537-5555
• /
• 2017

Having the characteristics of unlinkability, anonymity, and unforgeability, blind signatures are widely used for privacy-related applications such as electronic cash, electronic voting and electronic auction systems where to maintain the anonymity of the participants. Among these applications, the blinded message is needed for a certain purpose by which users delegate signing operation and communicate with each other in a trusted manner. This application leads to the need of proxy blind signature schemes. Proxy blind signature is an important type of cryptographic primitive to realize the properties of both blind signature and proxy signature. Over the past years, many proxy blind signature algorithms have been adopted to fulfill such task based on the discrete logarithm problem (DLP) and the elliptic curve discrete log problem (ECDLP), and most of the existing studies mainly aim to provide effective models to satisfy the security requirements concerning a single blinded message. Unlike many previous works, the proposed scheme applies the signcryption paradigm to the proxy blind signature technology for handling multiple blinded messages at a time based on elliptic curve cryptography (ECC). This innovative method thus has a higher level of security to achieve the security goals of both blind signature and proxy signature. Moreover, the evaluation results show that this proposed protocol is more efficient, consuming low communication overhead while increasing the volume of digital messages compared to the performance from other solutions. Due to these features, this design is able to be implemented in small low-power intelligent devices and very suitable and easily adoptable for e-system applications in pervasive mobile computing environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.579-585
• /
• 2002

The investigation into the effect of various feedback errors on system performance can help the robust feedback channel design and transmission of exact feedback channel information as well. In this paper, we address the algorithm that determines space combining weight vector maximizing received signal power at mobile on frequency flat fading channel and investigate the performance degradation by feedback channel delay in the FDD/CDMA systems employing transmit beamforming. We observe the effect of feedback channel delay corresponding to the number of transmit antennas and the temporal/spatial correlation of channel. The results show that performance is more sensitive to feedback delay with the larger number of antennas when fadings at transmit antennas are not spatially correlated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.10
• /
• pp.654-663
• /
• 2014

Heterogeneous network (HetNet) with the various types of cells, e.g., with the different cell size and transmit power, has been introduced to improve the cell coverage and areal capacity in cellular mobile communication system. In this paper, we consider a practical situation in which all cells share the same wireless resource while some of them have a limited backhaul capacity. More specifically, we formularize a cell association problem that utilizes the minimum wireless resource while satisfying the quality of service (QoS) of all users in terms of their transmission time constraint, and propose a distributed algorithm to find the optimal solution. In the event of bottleneck at the backhaul link in some small cells, the proposed algorithm off-loads some users to the adjacent cell with the less congested backhaul capacity. Finally, we verify that the proposed algorithm supports the more numbers of users to satisfy the specified level of QoS than the conventional user association scheme under the limited access and backhaul capacities.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.80-83
• /
• 2016

In this paper, a simplified uplink transmission procedure is proposed for reducing energy consumption and improving lifetime of CIoT devices. In the proposed procedure, the CIoT devices register information on their service and traffic to the networks, and the networks statically allocate pre-defined amounts of radio resources when the CIoT devices have requested permission for their uplink transmissions. This paper provides details of the proposed procedure comparing with those of the current GSM procedure, and defines detailed operations of the devices and the networks for the proposed one. This shows that the proposed scheme can effectively support CIoT services on GSM networks.

• Corrosion Science and Technology
• /
• v.11 no.3
• /
• pp.96-102
• /
• 2012

Outer diameter stress corrosion cracking (ODSCC) has occurred for Alloy 600 (Ni 75 wt%, Cr 15 wt%, Fe 10 wt%) as a heat exchanger tube of the steam generator (SG) in nuclear power plants (NPP) during long term operation. Among many causes for SCC, lead (Pb) is known to be one of the most deleterious species in the secondary system. In the present work, the oxide formed on Alloy 600 was characterized as a function of the PbO content in 0.1 M NaOH at $315^{\circ}C$ by using an electrochemical impedance spectroscopy (EIS), a transmission electron microscopy (TEM), equipped with an energy dispersive x-ray spectroscopy (EDS). The oxide property was analyzed in view of SCC susceptibility.