• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.1
• /
• pp.9-18
• /
• 2021

In this study, surveys and data collection on new profit-sharing measures were carried out in order to improve the residential environment and residents' participation in 65 MW large-scale solar power complex located at Munhye 5-ri, Galmal-eup, Cheorwon-gun, Gangwon-do province. From May to September 2018, the presentation and meetings for residents were held and a survey for 67 households were carried out in order to collect profit-sharing data which is sharing profits from solar power project improving residential environment. The results of the survey shows that it needs to improve some obstacles of residential environment in rural areas, such as improvement of living infrastructure at village level, improvement of monotonous leisure activities from the residents' point of view, improvement of economic income sources depending on farm income and Basic Old-age Pensions, inconvenience factors in the unsuitable residential environment due to aging. Based on these findings, this paper suggests that Profit-Sharing solar power complex project has possibilities to improve living environment in rural areas by sharing profits from power generation and residents participating in the project with consensus for need of renewable energy.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.175-177
• /
• 2007

An analysis on a passive current sharing characteristics of a multi-phase synchronous buck converter is presented. The passive current sharing method is simple but its characteristics depend on the converter equivalent resistance and PWM uniformity. In this paper, the load sharing and power consumption of the passive current sharing system for the converter equivalent resistance and duty ratio inequalities are investigated through the simulation and experiment.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1575-1585
• /
• 2017

This paper presents a synchronous generator with a distributed system of multiple parallel three-phase power cells. This generator can immediately output high DC. Each power cell comprises three-phase windings and a three-phase synchronous rectification bridge with a deadbeat control of load power feedforward, which can improve the characteristics of dynamic response and reflect the load variance in real time. Furthermore, each power cell works well independently and modularly using the method of automatic maximum current sharing. The simulation and experimental results for the distributed controller of multiple power cells demonstrate that the deadbeat control method can respond quickly and optimize the quality of the energy. Meanwhile, automatic maximum current sharing can realize the validity of current sharing among power cells.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.7
• /
• pp.532-541
• /
• 2003

In a memory, most power is dissipated in high capacitive lines such as predecoder lines, word lines, and bit lines. To reduce the power dissipation in these high capacitive lines, this paper proposes three techniques using charge recycling and charge sharing. One is the charge recycling predecoder (CRPD). The second one is the charge recycling word line decoder (CRWD). The last one is the charge sharing bit line (CSBL) for a ROM. The CRPD and the CRWD recycle the previously used charge in predecoder lines and word lines. Theoretically, the power consumption in predecoder lines and word lines are reduced to a half. The CSBL reduces the swing voltage in the ROM bit lines to very small voltage using a charge sharing technique. the CSBL can significantly reduce the power dissipation in ROM bit lines. The CRPD, the CRWD, and the CSBL consume 82%, 72%, and 64% of the power of previous ROM designs respectively. A charge recycling and charge sharing ROM (CRCS-ROM) with the CRPD, the CRWD, and the CSBL is implemented. A CRCS-ROM with 8K16bits was fabricated in a 0.3${\mu}{\textrm}{m}$ CMOS process. The CRCS-ROM consumes 8.63㎽ at 100MHz with 3.3V. The chip core area is 0.1 $\textrm{mm}^2$.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.115-117
• /
• 2019

In this paper, an intelligent control scheme based on Fuzzy PID controller is proposed for accurate power sharing in DC Microgrid. The proposed Fuzzy PID controller is designed with the aid of a closed loop control based on per unit power of each distributed generator (DG), and accurate power sharing is successfully realized in proportional to each DG's power rating regardless of the line resistance difference or the load change. Thanks to Fuzzy PID controller, the dynamic response becomes faster and the stability of the microgrid system are improved in comparison to conventional PID controller. The superiority of the proposed method is analyzed and verified by simulation in Matlab and Simulink.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.549-556
• /
• 2014

This paper proposes a highly power-efficient single-inductor multiple-outputs (SIMO) DC-DC converter with a gate charge sharing method in which gate charges of output switches are shared to improve the power efficiency and to reduce the switching power loss. The proposed converter was fabricated by using a $0.18{\mu}m$ CMOS process technology with high voltage devices of 5 V. The input voltage range of the converter is from 2.8 V to 4.2 V, which is based on a single cell lithium-ion battery, and the output voltages are 1.0 V, 1.2 V, 1.8 V, 2.5 V, and 3.3 V. Using the proposed gate charge sharing method, the maximum power efficiency is measured to be 87.2% at the total output current of 450 mA. The measured power efficiency improved by 2.1% compared with that of the SIMO DC-DC converter without the proposed gate charge sharing method.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.234-243
• /
• 2019

Studying the control strategy of a microgrid under the load unbalanced state helps to improve the stability of the system. The magnitude of the power fluctuation, which occurs between the power supply and the load, is generated in a microgrid under the load unbalanced state is called negative sequence reactive power $Q^-$. Traditional power distribution methods such as P-f, Q-E droop control can only distribute power with positive sequence current information. However, they have no effect on $Q^-$ with negative sequence current information. In this paper, a stationary-frame control method for power sharing and voltage unbalance compensation in islanded microgrids is proposed. This method is based on the proper output impedance control of distributed generation unit (DG unit) interface converters. The control system of a DG unit mainly consists of an active-power-frequency and reactive-power-voltage droop controller, an output impedance controller, and voltage and current controllers. The proposed method allows for the sharing of imbalance current among the DG unit and it can compensate voltage unbalance at the same time. The design approach of the control system is discussed in detail. Simulation and experimental results are presented. These results demonstrate that the proposed method is effective in the compensation of voltage unbalance and the power distribution.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.99-105
• /
• 2004

A shared-capacitor charge-sharing ROM (SCCS-ROM) using dummy bit lines is proposed. The SCCS-ROM reduces the bit line swing voltage using the charge-sharing technique of the conventional charge-sharing ROM (CS-ROM). Although the CS-ROM needs three small capacitors per output bit, the proposed SCCS-ROM shares the capacitors so that it needs only three capacitors. The SCCS-ROM implements the capacitors using dummy bit lines. This not only increases noise immunity but also reduces power. A SCCS-ROM with 8K${\times}$15bits implemented in a 0.35${\mu}{\textrm}{m}$ CMOS process. The SCCS-ROM consumes 8.63㎽ at 100MHz with 3.3V The simulation results show that the SCCS-ROM reduces 8.4% power compared to the CS-ROM.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2315-2326
• /
• 2016

This paper discusses the elimination of DC voltage deviation and the enhancement of load current sharing accuracy in multi-terminal high voltage direct current (MT-HVDC) systems. In order to minimize the power line losses in different parallel network topologies and to insure the stable operation of systems, a decentralized control method based on a modified droop control is presented in this paper. Averaging the DC output voltage and averaging the output current of two neighboring converters are employed to reduce the congestion of the communication network in a control system, and the decentralized control method is implemented. By minimizing the power loss of the cable, the optimal load current sharing proportion is derived in order to achieve rational current sharing among different converters. The validity of the proposed method using a low bandwidth communication (LBC) network for different topologies is verified. The influence of the parameters of the power cable on the control system stability is analyzed in detail. Finally, transient response simulations and experiments are performed to demonstrate the feasibility of the proposed control strategy for a MT-HVDC system.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.399-410
• /
• 2015

A 6.5 V/50 kA high-frequency switching power supply (HSPS) system composed of 10 power modules is developed to meet the requirements of copper-foil electrolysis. The power module is composed of a two-leg pulse width modulation (PWM) rectifier and a DC/DC converter. The DC/DC converter adopts two full-wave rectifiers in parallel to enhance the output. For the two-leg PWM rectifier, the ripple of the DC-link voltage is derived. A composite control method with a ripple filter is then proposed to effectively improve the performance of the rectifier. To meet the process demand of copper-foil electrolysis, the virtual impedance-based current-sharing control method with load current full feedforward is proposed for n-parallel DC/DC converters. The roles of load current feedforward and virtual impedance are analyzed, and the current-sharing control model of the HSPS system is derived. Virtual impedance is used to adjust the current-sharing impedance without changing the equivalent output impedance, which can effectively reduce current-sharing errors. Finally, simulation and experimental results verify the structure and control method.