• Title/Summary/Keyword: power regulation

Search Result 1,331, Processing Time 0.028 seconds

Feasibility Evaluation of Co-Incineration with MSW for Efficient Recycling of the Rejects after Separation Processes in MRF (재활용 기반시설에서 발생하는 선별 잔재물의 자원화를 위한 도시생활폐기물과의 혼합소각 가능성 평가)

  • Shin, Taek-Soo;Sung, Baek-Nam;Yeon, Ik-Jun;Cho, Byung-Yeol;Kim, Kwang-Yul
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.33 no.10
    • /
    • pp.767-773
    • /
    • 2011
  • The purpose of this study was to investigate the possibility of an alternative fuel resource by incinerating a mix of combustible MSW (municipal solid waste) and offals after separating recyclable material at the MRF (material recovery facilities) location. We analyzed the physical and chemical properties including the 3-contents, the calorific value, and chemical compositions of the separation rejects in MRF, and compared the results with combustible MSW. Moreover, we experimented the trend of combustible properties and the concentration change of air pollutants at mixed incineration in the MSW incinerator. According to the results of the experiment, the separation rejects showed higher heating value (5,865 kcal/kg), and lower moisture and ash content than combustible MSW. Since we have incinerated MSW in the MSW incinerator mixing the offals at 30% and 50% respectively, we know that the change of the concentration of dust, $SO_2$, $NO_2$, and CO did not appear significant, and not exceed the pollutants emission regulation. But, considering the enhancement of the HCl emission concentration (max. 33.7 ppm) at the co-incineration of the 50% offals, we believe that the proper mixing ratio of the separation rejects would become within 30%.

A Study on the Manufacturing, Mechanical Properties,Abrasion Resistance, and Slow Crack Growth Resistance of the Recycled Polyethylene/Fly Ash Composites (재생 폴리에틸렌/비산회 분말 충전 복합체 제조와 기계적 물성, 내마모성 및 저속균열성장 저항성에 관한 연구)

  • Kye, Hyoung-San;Shin, Kyung-Chul
    • Elastomers and Composites
    • /
    • v.46 no.4
    • /
    • pp.335-342
    • /
    • 2011
  • The virgin and recycled polyethylene composites with various ratio of fly ash were manufactured by using a fully intermeshing co-rotating twin screw extruder for the reuse of fly ash from power plant and post-consumed polyethylene. Fly ash were blended with virgin HDPE and recycled polyethylene at the weight fraction of 0 to 40 wt.%. Mechanical properties such as yield strength, abrasion resistance, and slow crack resistance were measured with ISO and ASTM standards. The experimental results for the various composites showed that the elongation at break and the yield stress of the composites decreased with increasing fly ash contents. Generally, the abrasion resistance of PEs decreased with increasing sandpaper grits but the abrasion resistance of the composites increased with fly ash content at finer abrasive surface. The slow crack growth resistance of virgin HDPE, recycled JRPE and the JRPE composite showed higher slow crack growth resistance up to 50% of load at notch depth of 20% and 30%, but KRPE and the KRPE composite showed much lower resistance than virgin HDPE, JRPE and the JRPE composite. Time to break, measured with NCLS test method, of all PEs and the composites satisfies the regulation of Korean Industrial Specification for sewer pipe and support application.

A Study on Regulatory Law for Management System of Combined Medical Device (결합 의료기기 관리제도의 규제관련 법률에 관한 연구)

  • Choi, Yong Jun;Choi, Mi Lim;Lee, Jeong Chan;Jung, Yong Gyu
    • Journal of Service Research and Studies
    • /
    • v.4 no.2
    • /
    • pp.1-10
    • /
    • 2014
  • According to recent trends in technological advances and globalization, medical device industry may improve the constitution to meet worldwide medical equipment management system. Also it is holding a strand of mitigation to reach the level of international regulation. In addition, recent legislation tends are to stay limited ranges of industry regulations at least and take as open attitude for integration of new technologies combined medical devices. A greater environmental risk is not likely to work in medical technology, Combinded medical device is used as close to zero risk in most of the human body, which is classified as Class 1. Even medical device such as little or no risk in handling, it is possible to minimize the unnecessary administrative power and a waste of time to occur. For the medical device may be improving people's choices and access, medical equipment operator is expanding to include dealers, because this will be exalted to particular area of the business of the company. In this paper, we investigate the legal prerequisites for the establishment of a medical device. And propose improved regulations in topics in order to facilitate the repair and distribution markets for fair trade.

  • PDF

An Experimental Study on the Engineering Properties of Concrete according to W/C and Replacement Ratio of Bottom Ash (물-시멘트비 및 바텀애쉬 대체율에 따른 콘크리트의 공학적 특성에 관한 실험적 연구)

  • Choi, Se-Jin;Jeong, Yong;Oh, Bok-Jin;Kim, Moo-Han
    • Journal of the Korea Concrete Institute
    • /
    • v.15 no.6
    • /
    • pp.840-847
    • /
    • 2003
  • Recently, the coal-ash production has been increased by increase of consumption of electric power. So it is important to secure a reclaimed land and treatment utility for coal-ash. This is an experimental study to compare and analyze the engineering properties of concrete according to W/C and replacement ratio of bottom ash. For this purpose, the mix proportions of concrete according to W/C(40, 50, 60%) and replacement ratio of bottom ash(0, 10, 20, 35, 50%) were established, and then tested for slump, chloride content, setting time, bleeding content, compressive strength. Also the durability test of concrete with W/E 60% was performed. According to test results, it was found that the bleeding content of concrete decreased as the replacement ratio of bottom ash increased. And the chloride content of concrete using the bottom ash increased as the replacement ratio of bottom ash increased, but it is satisfied with the chloride content of fresh concrete $0.30kg/m^3$ below("concrete standard specification" regulation value). The compressive strength of concrete using the bottom ash was similar to that of BA0 concrete after 28 days of curing and the carbonation depth of concrete was increased according to increase of the replacement ratio of bottom ash.

Effects on Self-esteem among Female Undergraduate Students (여대생의 자아존중감에 미치는 영향)

  • Heo, Narae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.6
    • /
    • pp.536-548
    • /
    • 2018
  • This study was conducted to investigate the effects of appearance stress, alcohol intake, and eating attitude on self-esteem of female undergraduate students. Participants were 150 female undergraduate students who responded to a survey conducted from March to July of 2017. Data collected were analyzed by stepwise multiple regression analysis using an IBM SPSS 23.0. The influencing factors of self-esteem were satisfaction with college life and appearance stress, and the power of the variables was 11%. The results verified that college life and appearance stress were important factors influencing self-esteem, a critical element in the personality dimension that assesses self-affirmation. Therefore, self-esteem should be improved by providing a buffer to revitalize character resources for positive self-internalization, the formation of a healthy self-image and affect regulation which can enable one to flexibly cope with situations of appearance stress. Also, external resources should be provided inside and outside of school to help university students become cognizant of an objective perspective of the various environments of college life they face, as well as to have a positive view of themselves in college life by regulating the differences between the environments they face and their individual circumstances.

A Revisit to the Forest Policy of Korea during the Period of 1906-1910 under the Spheres of Influence of Japan - With a Special Reference to an Attempted Incident of Wando Bongsan - (통감부시기(統監府時期)(1906-1910)의 삼림정책(森林政策)에 관한 고찰(考察) - 완도봉산(封山) 불하미수사건을 중심으로 -)

  • Bae, Jae Soo;Youn, Yeo Chang
    • Journal of Korean Society of Forest Science
    • /
    • v.84 no.1
    • /
    • pp.48-62
    • /
    • 1995
  • In the paper, the forest policy of Korea during the period of 1906 to 1910 under the spheres of Japanese influence was revisited by considering the incident of attempting sales of the old Crown forest reserve in Wando to a Japanese business man with a failure and the national forest policies of the Residence General in Korea of the Japanese Imperial. The factors, both the internal and external, behind the scene of the incident are considered for the explanation for the development of the incident with the forest reserve in Wando. The forest policy during the period considered involves the exploitation of virgin forests in the northern provinces near the rivers bordered with China and Russia, the introduction of forest law, which is the first modern regulation enacted with the heavy influence of the Japanese interest in the colonization of Korea. The intentions of the Japanese Colonial Power for the exploitation of forest resources in Korea were interpreted by investigating the report on the situation of forest ownership in Korea prepared by Japanese forest officers who surveyed the Korean forest areas by sampling just before the beginning of colonization.

  • PDF

The Design of an Auto Tuning PI Controller using a Parameter Estimation Method for the Linear BLDC Motor (선형 추진 BLDC 모터에 대한 파라미터 추정 기법을 이용하는 오토 튜닝(Auto Tuning) PI 제어기 설계)

  • Cha Young-Bum;Song Do-Ho;Koo Bon-Min;Park Moo-Yurl;Kim Jin-Ae;Choi Jung-Keyng
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.10 no.4
    • /
    • pp.659-666
    • /
    • 2006
  • Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

Effect of Containing Promoter on SCR Catalysts (SCR 촉매에 포함된 조촉매 영향)

  • Seo, Choong-Kil
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.9
    • /
    • pp.474-481
    • /
    • 2018
  • The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for approximately 95% of automobiles in use. To meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is increasing continuously. As diesel engines have high power and good fuel economy in addition to less CO2 emissions, their market share is increasing not only in commercial vehicles, but also in passenger cars. Because of the characteristics of the diesel combustion, however, NOx is generated in localized high-temperature combustion regions, and particulates are formed in the zones of diffusion combustion. LNT and urea-SCR catalysts have been developed for the after-treatment of exhaust gas to reduce NOx in diesel vehicles. This study examined the effect of a containing promoter on SCR catalysts to cope with the severe exhaust gas regulation. The de-NOx performance of the Mn-SCR catalyst was the best, and the de-NOx performance was improved as the ion exchange rate between Mn ion and Zeolyst was good and the activation energy was low. The de-NOx performance of the 7Cu-15Ba/78Zeoyst catalyst was 32% at $200^{\circ}C$ and 30% at $500^{\circ}C$, and showed the highest performance. The NOx storage material of BaO loaded as a promoter was well dispersed in the Cu-SCR catalyst and the additional de-NOx performance of BaO was affected by the reduction reaction of the Cu-SCR catalyst. Among the three catalysts, the 7Cu-15Ba/Zeolyst SCR catalyst was resistant to thermal degradation. The same type of CuO due to thermal degradation migrates and agglomerates because BaO reduces the agglomeration of the main catalyst CuO particles.

A Study on the Image Communication of Military Style in 20th Century (20세기 밀리터리 스타일의 이미지 커뮤니케이션에 대한 연구)

  • Cho, Jung-Mee;Yoo, Hee
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.32 no.8
    • /
    • pp.1309-1321
    • /
    • 2008
  • Military style is not limited to a single period but represents various image communications related to items, synthetic images and different periodical culture backgrounds. The purpose of this study is to define the communicational function of the military style beginning from the 1st world war up to the modern days, and furthermore explain the characteristics and contents of military styles in different periods by studying the nowadays various symbols of the military style in denotative and connotative aspects. The research method is documentary studies through the literature and academic paper, and examined masters' and doctors' thesis, domestic and overseas books and fashion magazines, photographs and materials collected from the internet. As a result, first, the military style is a significant fashion code in understanding modern fashion by serving as a strong communication function representing people’s ritual through various image items called the 'military look'. Second, the meaning of the image communication through military look changed throughout the different periods. During the 1st and 2nd World war the military look supported Fascism by serving as a media representing extreme patriotism and at the same time social images like functionalism, women liberation, regulation and saving. During the cold war period it was used by young progressives like hippies and punks to send an opposing message towards war and commercialism. Since then up to the 80s it was a medium representing the ‘new role of women’, who possess same social rights and power as the men. However in the 90s the military style had to go through a paradigm transition period. Since this period it got affected by the post modernism and designers, consumers alike adopted military style to create unique beauty It can also be said that it began to be used as a pure fashion code representing intertextuality. It was rather expressed as a metonymy than a metaphor and combined with elegance and feminine factor, which contrasts to the original military concept, it now represents totally new hybrids such as difference, dissemination and varieties.

The Present Situation, its Controversial Points and its counterplans of Korean Students who are Studing Chinese Medicine in China (중국(中國)의 중의약대학(中醫藥大學) 한국유학생(韓國留學生) 현황(現況), 문제점(問題點) 및 대책(對策))

  • Lee, Seon-Dong;Mun, Yong
    • The Journal of Korean Medicine
    • /
    • v.18 no.1
    • /
    • pp.126-142
    • /
    • 1997
  • For last four or five years, the number of Korean students have gone on increasing awfully. After the year 1997 when they will flow in, our field and government will be undergone a big shock and social problems. Therefore, thorough grasping and the method of provision is expeced to need. 1. The situation, According to the data published from the year 1993 to 1997, their results are great different. But recent Korean embassy in China examined the situation of the Korean students, whose result was investigated as follows: about 1500 persons, their average age is 24 to 44, the ratio of male and female students is 3 to 1, that of their academic background which is a graduate of university : that of college : that of highschool is 1.6 : 1 : 4.7, and that of their class attitude which is direct : common : indirect appears the percents 30.4 : 52.8 : 16.8. 2. The controversial points (1) A lowering of standards on Chinese medical treatment is expected by the imprudent studying abroad without qualification. And because of excessive production of herb doctors, the amount of treatment may be above people's demand. Besides owing to the impossibility of prediction on the number the counterplans of our government may fall into utler confusion. (2) The curriculum, the teaching schedule and contents are so different that the graduates seem not to be given real education of chinese medicine from the point of Korean view. (3) In the wrong national examination, the important thought of china, and the system of WTO in Korea, when China will become mighty rival above problems contain the negative sides. 3. The counterplans - what should be performed soon. (1) Illegal contents about studying abroadl in China ought to inform sidely that students might not go on increasing. Before they form nam-power, the government and the field of chinese medicine should cope with such a situation together. (2) The law of regulation about agents should be legislated and they should be surpervised. (3) The exact numbers of students, their situation, and the present condition of each university should be examined. (4) After investigating the problems of the present system of national test, its enforcement and many counterplans is requisite. (5) The cooperating confrontation with the conference of dentistry is in need. (6) Since the problems are possibility to be developed to diplomatic questions, the effort of both nations is needful. - what need middle of long time. (1) The effort that suppress the more establishment of the college of oriental medicine is necessary. (2) After comparing with the system of foreign test, the government should make the system of test in accord with the mutualism and the principle of indiscrimination among nations and cope with such a many issues thoroughly.

  • PDF