• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.11
• /
• pp.884-890
• /
• 2008

Many researches have been carried out to reduce the emission levels and lower the fuel consumption in SI engines. Recently electronically controlled injection system is widely adapted to a passenger car to achieve these goals. Throttle body is also an important factor which influences on the emissions and engine power. In this study we redesigned a throttle body and conducted an experimental study to see the effects on engine performance and emission characteristics. We could find that idle speed control(ISC) showed stable operation characteristics as the cooling water temperature varied. And CO and HC emissions also satisfied the regulation limit.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.745-754
• /
• 2012

The correlations between Large Early Release Frequency (LERF) and Early Fatality need to be investigated for risk-informed application and regulation. In Regulatory Guide (RG) -1.174, while there are decision-making criteria using the measures of Core Damage Frequency (CDF) and LERF, there are no specific criteria on LERF. Since there are both huge uncertainties and large costs needed in off-site consequence calculation, a LERF assessment methodology needs to be developed, and its correlation factor needs to be identified, for risk-informed decision-making. A new method for estimating off-site consequence has been presented and performed for assessing health effects caused by radioisotopes released from severe accidents of nuclear power plants in this study. The MACCS2 code is used for validating the source term quantitatively regarding health effects, depending on the release characteristics of radioisotopes during severe accidents. This study developed a method for identifying correlations between LERF and Early Fatality and validates the results of the model using the MACCS2 code. The results of this study may contribute to defining LERF and finding a measure for risk-informed regulations and risk-informed decision-making.

• New & Renewable Energy
• /
• v.9 no.2
• /
• pp.51-57
• /
• 2013

The Grid code is being strengthen as increase of renewable energy ratio. Especially, the grid connection regulations are continuously being updated for stable operation of power grids. Static grid support and Dynamic grid support must make an accurate measure at Grid connected point because they needs control algorithm individually. It has to exactly measure voltage including switching ripple at the output of the inverter generating system. In addition, it is necessary to have an accurate voltage measurement when the situation rapidly changing the grid impedance is caused by the input of serial impedance of transformer and line impedance as well as Grid Fault Device. In this paper, We propose a new detection method of grid voltage to calculate accurately the r.m.s voltage of the grid connection point along the standard required by the low voltage regulation. We verified performance through simulation grid fault device.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.969-978
• /
• 2016

Around the world are increasing the demand for ESS. Currently, the domestic is expected to benefit by operating ESS. In the domestic, it is expected to benefit from operations of the installed ESS because of the introduction of ESS less capacity. However ESS capacity to the maximum profit occurs is unknown. ESS is different from the charge-discharge characteristics and the reserve to replace, depending on the application. Therefore, it should be established in accordance with the ESS optimal capacity according to the purpose used because it can maximize the quality and efficiency of the electric energy. To the ESS optimal capacity estimation by the purpose used, It should compare the investment cost caused by ESS facility installation and operation cost caused by operating ESS. In this paper, the operation mathematical model for estimating marginal operation costs established. In operation mathematical model, operating cost is considered fuel cost and no-load cost start-up cost. Because no-load cost and start-up cost are not related to cost and power plant output, there are expressed an integer variable costs as a step function.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1625-1633
• /
• 2012

In the lighting industry, a Lighting Emitting Diode (LED) is increasingly used because of many advantages and a eco-friendly product comparing with the conventional lighting. However, the LED lighting has to include various AC/DC converters because the direct current is used for the LED lighting. Among a lot of power converters, the flyback converter is widely used for the LED lighting and includes some electrolytic capacitors for the voltage regulation. But the electrolytic capacitor has shorter lifetime than the LED element. It makes the expected life-time of the converter having the electrolytic capacitor shorter than the LED element. This paper proposes the single-stage PFC flyback converter without electrolytic capacitors. To verify the performance of the proposed converter, simulated and experimental works were carried out.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.332-337
• /
• 2004

The use of gas absorption refrigeration machine has considerably increased because of the shortage of the electric power in the summer and the regulation of freon refrigerant. Gas absorption refrigeration machine consists of a condenser, a heat exchanger. supplying pipes, a radiator etc, This system is likely to be corroded by acid. dissolved oxygen and gases, Cavitation erosion-corrosion by flow velocity of cooling water may happen in absorption refrigeration machine. In these cases. erosion and corrosion occur simultaneously. Then, it makes a serious damage with synergy effect. Therefore, this paper was studied on the cavitation damage of cupronickel(70/30) tube for gas absorption refrigeration machine, In the $30^{\circ}C$ tap water, linear polarization test and anodic polarization test were carried out for copper(C1220T-OL) and cupronickel(70/30) tube. Also, cavitation erosion-corrosion behavior of cupronickel (70/30) tube was considered, The main results are as following: (1) In the linear test, the corrosion current density of cupronickel(70/30) is higher than that of copper. (2) The erosion-corrosion rate of cupronickel(70/30) displayed later tendency than that of copper by vibratory cavitation in cooling water. (3) In cooling water, the progress mechanism of erosion-corrosion rate of copper and cupronickel(70/30) follows a pattern of incubation, acceleration, attenuation and a steady state period.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.229-239
• /
• 2020

This paper examines the impact of gender on access to debt finance among Vietnamese enterprises. The paper investigates data and variables retrieved from the World Bank Enterprise Survey dataset using five Probit models. The regression results suggest that there exist more unfavourable debt financing conditions for women-led firms (WLF), measured as a lower probability of having loan applications fully approved. Firm's age, working sector, and perception of access to finance as a difficulty are found to have explanatory power on the discrimination. More importantly, the perception of debt finance as a difficulty or firms' level of confidence significantly explains the variance of the dependent variable of probability of loan approval, or gender effect would be more pronounced if the firm already has a low level of confidence. The paper also contributes in testing for the gender effect on Vietnamese enterprises from different sectors and scale, unlike other prior research papers focusing on specific sectors and/or small and medium enterprises only. The findings are highly useful for Vietnamese credit institutions to set out a specific business policy to attract more WLFs and help promoting gender equality in the working environment, especially in debt financing, which is often neglected in existing regulation and policy frameworks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.665-668
• /
• 2007

The location based service means the service using the location information and the service used based on the location information comes into the spotlight as the critical information of the future mode townsman ubiquitous-City construction. LBS settles down as the core element of ITS or the telematics as the cutting edge technology appearing according to the power generation of the mobile communication technology and recently gradually broadens a range to the public safety service including the distribution management, the asset management, a children and old and the weak protection means, the disaster preparation rescue service like the E-911 of U.S. In the national, the technical regulations about the ground wave LBS was established at November 2005 for the first time in the country. but it actually operated and problems were deduced. Therefore, in this paper, domestic and foreign LBS usage trend and technical standards case try to be analyzed for the revision of the technical regulations of the ground wave LBS serviced in the national and the national technical standards bill for the revision tries to be prepared based on this.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05c
• /
• pp.132-137
• /
• 2002

The mold transformers have been widely used in underground substations in large building and have some advantages in comparison to oil-transformer, that is low fire risk, excellent environmental compatibility, compact size and high reliability. In addition, the application of mold transformer for outdoor is possible due to development of epoxy resin. The mold transformer generally has cooling duct between low voltage coil and high voltage coil. A mold transformer made by one body molding method has been developed for small size and low loss. The life of transformer is significantly dependent on the thermal behavior in windings. To analyse winding temperature rise, many transformer designer have calculated temperature distribution and hot spot point by finite element method(FEM). Recently, numerical analyses of transformer are studied for optimum design, that is electric field analysis, magnetic field, potential vibration, thermal distribution and thermal stress. In this paper, the temperature distribution of 50 kVA pole mold transformer for power distribution are investigated by FEM program and the temperature rise test of designed mold transformer carried out and test result is analyzed compare to simulation data. In this result, the designed mold transformer is satisfied to limit value of temperature and the other property is good such as voltage ratio, winding resistance, no-load loss, load loss, impedance voltage and percent regulation.

• Journal of the Korean Regional Science Association
• /
• v.11 no.1
• /
• pp.1-20
• /
• 1995

This paper studies the comparative advantage of competitive and specialized regional industries which are manufacturing, wholesale and retail trade, servies in the metropolitan area-Seoul, Inchun, Kyunggi-do of Korea, For the analysis of industries, the coefficient of specialization, the indices of competitiveness of labor and value-added, the growth rate are simultaneously examined under the criteria of the number of workers, value of shipment, value-added, This comperative synthetic analysis is different from the traditional approaches. This paper shows that the perfectly competitive advantage of specialized industries satisfying all of three criteria are 'other business related activities', 'recreational, cultural and sporting activities' in Seoul, 'machinery and outfits, n.e.c', 'retail trade, except of motor vehicles and motorcycles, repair of personal and household goods' in Inchun. We conclude that each should strategically develop the region-oriented specialized industry which has the comparative advantage. It is the reason why the concentration of industry in necessary for the leading of regional industry under the weaken local public finance. Moreover, such an industy should provide the increase of employment and income from the viewpoint of the activation of regional economy. The potential-specialized competitive industry requires the advanced structure of production under the criteria of value-added. For the development of the metropolitan area's economy, the highly advanced technology industry including computer and electronics should be induced through the loosening of metropolitan regulation. Research center(science park) supported by th private-public sector should be built for the increase of technology sector should be built for the increase of technology power of the small and medium enterprises, Also it is necessary that the small and medium enterprises strategically make the cooperative-large group in order to avoid the disadvantage from the size.