• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.3-10
• /
• 2014

In this paper, the performances of the presented D2D (device-to-device) systems under the environment of the cognitive convergent overlay networks are evaluated based upon the locations of the D2D users' terminals, the power consumptions of the terminals and the reductions of the interference levels. As the capabilities of the users' terminals improve, the optimization of the system is crucial to the efficient utilization of the radio resources of the individual networks considering their mobility and the features of their networks. Users' mobility model is given for the performance evaluation of the D2D system. In this paper, the performances of the D2D systems are evaluated in terms of the performance index of the FER (frame error rate) employing multiantenna techniques (MIMO:multiple input multiple output) for the various network environments.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.5
• /
• pp.21-30
• /
• 2005

Recently, a mobile IPv6 binding update protocol using Address Based Keys (BU-ABK) was proposed. This protocol applies Address Based Keys (ABK), generated through identity-based cryptosystem, to enable strong authentication and secure key exchange without any global security infrastructure. However, because it cannot detect that public cryptographic parameters for ABKs are altered or forged, it is vulnerable to man-in-the-middle attacks and denial of service attacks. Furthermore, it has heavy burden of managing the public cryptographic parameters. In this paper, we show the weaknesses of BU-ABK and then propose an enhanced BU-ABK (EBU-ABK). Furthermore, we provide an optimization for mobile devices with constraint computational power. The comparison of EBU-ABK with BU-ABK shows that the enhanced protocol achieves strong security while not resulting in heavy computation overhead on a mobile node.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.123-132
• /
• 2011

Recently, DVC (Distributed Video Coding) is receiving a lot of attention as one of the low complexity video encoding techniques suitable for various applications with computation-limited and/or power-limited environment, and is being actively studied for improving the coding efficiency. This paper proposes a rate-distortion based selective block encoding scheme. First, the motion information is obtained in the process of generating side information at decoder and received through the feedback channel, and then, based on this information, the proposed method performs a selective block encoding based on rate-distortion optimization. Experimental results show that the performance of the proposed scheme reaches up to 2.2 dB PSNR gain over the existing scheme. Moreover, it is shown that the complexity can be reduced by encoding parts of region considering rate-distortion cost.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.520-527
• /
• 1988

Liquid ejectors are widely used as marine pumps, inducer stage for the boiler feed water pump, boiler recirculating pump, cooling water recirculating pump in boiling water type nuclear reactor and a deep well pump, because of their high working confidence and simplicity. Furthermore, it requires only a modest net positive suction head for cavitation-free operation and it can be installed in remote location from mechanical power source. It is not easy to presume the friction losses, because it is complicately affected by area ratio, flowrate ratio, nozzle spacing, throat length, shape of liquid ejector and so on. Therefore, the optimization of liquid ejector design is still dependent, to a large extent, on the experimental results and empirical procedures. On the design of the liquid ejector, the area ratio and the nondimensional throat length are the most important design factors among the mentioned above. In this experiment, the effects of the area ratio and the nondimensional throat length to ejector efficiency are carried out systematically by the combination of 4 kinds of motive nozzle and 2 kinds of throat length. In this paper, the present experimental results are compared with the calculated ones by the previous computer aided design program based on one dimensional flow equation. And also, an empirical equation for the working limit of liquid ejector is reported.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.288-294
• /
• 2016

In modern ships, the shafting system often becomes stiff owing to the high engine power, whereas the hull structure becomes more flexible owing to optimization using high-tensile-strength thick steel plates; therefore, more sophisticated shaft alignments are required. In this study, strain gauge-based measurement was conducted under five vessel operating conditions and bearing reaction forces and hull deflections affecting shaft alignment were analyzed for a 50,000 dead weight tonnage oil/chemical tanker that has gained repute as an eco-friendly vessel in recent years. Furthermore, the analytical results from each technique-theoretical calculation, jacking ups, and strain gauges-were cross-checked against each other in order to enhance the degree of accuracy and reliability of the calculation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4814-4834
• /
• 2018

This paper presents an architecture for wireless sensor networks (WSNs) with blind source separation (BSS) applied to retrieve the received mixing signals of the sink nodes first. The little-to-no need of prior knowledge about the source signals of the sink nodes in the BSS method is obviously advantageous for WSNs. The optimization problem of the BSS of multiple independent source signals with complex and noncircular distributions from observed sensor nodes is considered and addressed. This paper applies Castella's reference-based scheme to Novey's negentropy-based algorithms, and then proposes a novel fast fixed-point (FastICA) algorithm, defined as the reference-signal negentropy complex FastICA (RSNT-cFastICA) for complex-valued noncircular-distribution source signals. The proposed method for the sink nodes is substantially more efficient than Novey's quasi-Newton algorithm in terms of computational speed under large numbers of samples, can effectively improve the power consumption effeciency of the sink nodes, and is significantly beneficial for WSNs and wireless communication networks (WCNs). The effectiveness and performance of the proposed method are validated and compared with three related BSS algorithms through theoretical analysis and simulations.

• Applied Chemistry for Engineering
• /
• v.29 no.5
• /
• pp.565-570
• /
• 2018

In this study, the antioxidant was extracted from Broussonetia kazinokii using ultrasound-assisted extraction (UAE) and optimized by using a response surface methodology. The response value of the central composite design model establishes the extraction yield and the DPPH radical scavenging activity. The extraction time and temperature and volume ratio of ethanol/ultrapure water were selected as quantitative factors. When considering both the main and interaction effects, the factor having the greatest influence on the extraction yield and 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity was the volume ratio of ethanol/ultrapure water. The results of optimal extraction conditions were the extraction time (19.92 min), volume ratio of ethanol/ultrapure water (54.23%), and ultrasonic irradiation power (557.65 W). We could also obtained expected results of the yield = 38.93 wt% and DPPH radical scavenging activity = 55.33% under these conditions.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.65-72
• /
• 2002

This study was to determine the optimum conditions of malt extracting temperature, extracting time of malt in water, ratio of malt to water, and rice volume of malt extract water on saccharification in producing sikhe (sweet rice drink) using central composite design of response surface methodology. Glucose and maltose were analyzed by a biosensor having dual cathode system. The optimum temperatures of malt extracting for glucose and maltose were 60 and $55^{\circ}C$. The saccharification power for the two sugars was highest when malt powder soaked for 6.5 and 5.75 hour, respectively. And ratios of malt to water for optimum saccharification were 1 : 6.3 to 1 : 8.8, respectively. The optimum volumes of malt extracting to rice for the two sugars were 0.48% and 0.6%, respectively. The application of response surface methodology to sikhe processing showed a good correlation with high significance.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.5
• /
• pp.82-89
• /
• 1996

Application fields of ultrasonic transducers can be divided into two categories, a high ultrasonic resolution required field and a high ultrasonic power required field. This paper is aimed to determine the optimal properties of the matching layers of the transducer for each of the applications. Further, it is aimed to optimize the properties of the matching layers that show satisfactory performances for both of the application fields. Through the direct time domain analysis of the transmission and reflection behavior of the ultrasonic wave, apart from the conventional equivalent circuit analysis, and Fourier transformation of its results, we found the optimum acoustic impedances of the matching layers. The newly determined layers provide much better transducer performance-57% at most-than those obtained with conventional design methods. Based on the results, we also found the optimal acoustic impedances of the layers good for both of the application fields. For te optimization, we developed a new transducer performance evaluation parameter that can be applied to any type of ultrasonic transducers.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.1 s.41
• /
• pp.1-7
• /
• 2005

The optimal seismic retrofitting of NPP(Nuclear Power Plant) cabinet structures that contain seismic category 1 relays was studied in this paper. During earthquake event, the failure modes of relays are not appeared in form of structural failure, but are appeared in form of contact chatter of relay. Therefore, the retrofitting of cabinet has to be aimed at the reducing of the structural response, such as acceleration. In this study, the optimal characteristic values of dampers were searched by ${\mu}$-GA (micro-Genetic Algorithm) scheme for several installation patterns. To keep accuracy and efficiency of analysis, the structural models of cabinet were considered as a frame structure. The responses of structure were obtained inform of acceleration response spectra derived from the results of nonlinear time history analysis including damping nonlinearity. The objective function of the optimum procedure was constructed based on the maximum ratio of maximum spectral value and target GERS (General Equipment Ruggedness Spectra). The results show the good improvements of fitness for adequate retrofitting pattern. Especially, the improvements of fitness were remarkable when the values of damping exponents are low.