• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.103-106
• /
• 2002

This paper has studied a remote AMR(Automatic Meter Reading) system using the power line and the telephone line as a communication media and the digital power meter. In the developed system, because we have used the power line and telephone, the facility is very easy and then its cost is not expensive. The system includes following elements: a digital power meter, an indoor communication system using a power line modem and a telephone line interface system for sending data to the utility company.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.575-580
• /
• 1998

A power meter is an instrument for measuring in watts the power flowing in a electric equipment. Since the value which a conventional power meter measures is analog, the power meter is hard to determine a phase difference between the voltage and current for a inductive load. The phase difference causes a loss of electric power and a increase of power-line load. In this paper, we propose a digital power meter using TI's DSP(Digital Singnal Processor) TMS320C5x, which is employed to calculate the phase difference and more accurate power consumption.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2219-2221
• /
• 2001

A communication protocol for automatic meter reading is designed for electronic power meter. Communicational functions and data structures are standardized and data reading software is developed according to the developed protocol. The communication protocol is designed with reference specifications, IEC 62056-31 and Distributed Network Protocol(DNP). For design, communicational functions and specifications of the industrial meters were analyzed for the purpose of developing a new one for KEPCO meters. The protocol is designed with 3 layer model, physical layers, data link layer and application layer. A documentation was completed with data gathering, data classification, authentication, error detection. An emulator system was made for testing the protocol. A meter reading software was developed using the protocol. Many different protocols and meter reading softwares are integrated into one with the developed protocol and software as KEPCO's standard.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.43-47
• /
• 1980

The author designed and tested the high sensitive three-phase power factor meter and relay circuit, and dealt with the circuit to detect the phase of the current and the voltage. An operational amplifier comparator circuit and two single-phase transformers are used to control and detect the phase angle between the current and the voltage. The results obtained are as follows: 1. Converting the sine wave input current into the constant amplitude rectangular wave form by using a transistor chopper circuit, the power factor can be measured precisely over the load current of 0.08 A. 2. Using the moving coil type current meter, the power factor meter can be read in uniform . scale all over the range. 3. Using the three-phase power factor meter, the power factor relay which works at any power factor can be made.

• 한국정보통신학회논문지
• /
• 제12권5호
• /
• pp.963-970
• /
• 2008

RFID/USN 기술을 이용하여 각종 계량기를 원격으로 검침하려는 시도가 계속되고 있다. 수도 검침의 경우 아직 무선으로 원격 검침하는 체계가 발표되었거나 상용화되지 못하였다. 본 논문에서는 원격검침을 위한 디지털 수도 계량기의 설계 및 구현을 기술한다. 자기장을 감지하는 홀 센서를 사용하여 검침하고 그 결과를 ZigBee 무선으로 게이트웨이에 전송한다. 배터리만으로 계량기의 내구연한을 견뎌야 하므로 저전력 설계가 필수적이다. 구현된 계량기의 전력 소모량을 분석하여 3V, 3000mAh 용량 배터리, 2개로 8년의 내구연한을 견딜 수 있음을 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제20권5호
• /
• pp.51-56
• /
• 2020

측정 명령어에 따른 정확도와 소요시간은 효율적인 Ka 밴드용 자동 시험 장비(ATE)를 구축하는데 중요한 요소이다. 이에 따라 본 논문에서는 RF 대표 계측기 Power Meter의 측정 명령어에 대해 연구하였다. 30 G ~ 31 GHz에서 Power Meter의 측정 명령어 FETCH와 MEASURE의 각 측정 레벨에 따른 정확도와 소요시간을 비교하였으며, -70 ~ +20 dBm 영역을 2가지 Power Sensor로 측정하였다. 측정 결과 신속하게 데이터를 불러오는 FETCH 명령어는 잡음 레벨보다 높은 선형 구간에서 비교적 정확한 데이터를 얻을 수 있었다. 가장 정확한 데이터를 얻을 수 있는 MEASURE 명령어는 FETCH 대비 시간이 많이 소요 되었으며, 최대 13.2초가 소요 되었다. 이를 통해 30 G ~ 31 GHz에서 Power Meter 측정 명령어의 정확도와 측정 소요시간을 확인할 수 있었고, 해당 연구 결과는 효율적인 Ka 밴드용 ATE를 구축하는데 기준을 제시할 수 있을 것으로 기대된다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권5호
• /
• pp.205-215
• /
• 2006

In this paper an optical power meter using Hadamard transform, which can be used in multiple channel optical elements alignment system, is proposed. A traditional optical power meter in multiple channel optical elements alignment system is able to judge how well the elements are aligned each other by measuring optical power of the first and the last two channels with at least two detectors. It has critical drawback that the alignment accuracy per channel is dependent on the number of detectors. The proposed optical power meter can get noise reduction by the Hadamard transform based multiplexing technique. The Hadamard transform based multiplexing technique using spatial light modulators is distinguished by the best enhancement of signal-to-noise ratio (SNR) for the reconstructed signals. Moreover, the noise reduction increases with increasing the order of multiplexing, namely the number of optical element channels. The proposed system is implemented by PDLC (Polymer Dispersed Liquid Crystal) mask which is operated by electric filed and generates optimal multiplexing patterns based on the Hadamard transform and single detector. It means that we obtain not only the each channel's optical power of multiple channel elements at once but also the best enhancement of SNR with single detector. Experimental results show that the proposed optical power meter is suitable for an active optical alignment system for multiple channel optical elements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.985-987
• /
• 1997

AMR(Automated Meter Reading) has been considered to solve the lack of meter mem caused by the rise of cost, inefficiency of manual meter reading. Demand forecasting and efficient management of facilities can be accomplished by increasing meter reading efficiency and correcting various data. In this paper, we introduce AMR system using LV PLC in KANG-DONG blanch office of KEPCO.

• 한국컴퓨터정보학회논문지
• /
• 제13권4호
• /
• pp.45-50
• /
• 2008

계량기의 지침을 인식하고 수도 관리 사업소로 데이터를 전송하기 위한 검침모듈은 전원을 전력선으로 이용할 수 없다. 따라서, 검침모듈은 배터리를 이용해야 하므로 주기적으로 소모된 배터리를 교체하는 유지보수 문제가 발생한다. 유지보수 비용을 절감하기 위해 전원 소모를 줄이면서 무선으로 데이터를 전송 할 수 있는 방안이 필요하다. 본 논문에서는 효율적인 전원관리를 통하여 배터리 소모량을 줄이면서 고객계량기의 지침을 자동으로 인식하고, RF를 이용하여 검침 데이터를 전송 할 수 있는 원격검침 모듈을 설계하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권11호
• /
• pp.587-596
• /
• 1999

The use of Switching elements in power systems causes the current or voltage to involve harmonic waves. Harmonics bring about registration errors of the equipment for measuring power. In case the induction watthour meter designed on sinusoidal source is used in the measurement of power with harmonics, the precise measurement of power has many problems because harmonics cause a decrease of power factor and vibration by the unstable driving force on the aluminum disc. In this paper, analysis and test results on the harmonic sensitivity of an induction watthour meter is reported when the input voltage and current with harmonics were supplied to single-phase watthour meter.