• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.282-285
• /
• 2000

Four helical resonators are distributed in a 2 ${\times}$ 2 array by modifying upper part of the conventional reactive ion etching(RIE) type LCD etcher in order to prepare a large area plasma source. Since the resonance condition of the RF signal to the helical antenna, one RF power supply is used for delivering the power efficiently to all four helical resonators without an impedance matching network Previous work of 2 ${\times}$ 2array inductively coupled plasma(ICP)requires one matching circuit to each ICP antenna for more efficient power deliverly Distributions of ion density and electron temperature are measured in terms of chamber pressure, gas flow rate and RF power . By adjusting the power distribution among the four helical resonator units, argon plasma density of higher than 10$\^$17/㎥ with the uniformity of better than 7％ can be obtained in the 620 ${\times}$ 620$\textrm{mm}^2$ chamber.

• 한국전기전자재료학회논문지
• /
• 제24권1호
• /
• pp.57-63
• /
• 2011

Dielectric Barrier Discharge (DBD) reactor with sinsodual AC type of power supply is very widely adopted for its compact size and effective discharging mechanism to generate high density of ozone radicals. However, at the aspect of design on power supply, its optimal switching conditions and topology is achieved by empirical test. Therefore, throughout this paper, it is proposed a design method of DBD power supply to guarantee a maximum ozone yield rate in accordance with DBD reactor modification and impedance variation when rapid gas discharging in the DBD reactor is proceeded.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.52-56
• /
• 2016

This paper suggests a class-F power amplifier with split open-end stubs to provide a broadband high-efficiency operation. These stubs are designed to have wide bandwidth by splitting wide open-end stubs into narrower stubs connected in shunt in an output matching network for class-F operation. In contrast to conventional wideband class-F designs, which theoretically need a large number of matching lines, this method requires fewer transmission lines, resulting in a compact circuit implementation. In addition, the open-end stubs are designed with slant ends to achieve additional wide bandwidth. To verify the suggested design, a 10-W class-F power amplifier operating at 1.7 GHz was implemented using a commercial GaN transistor. The measurement results showed a peak drain efficiency of 82.1% and 750 MHz of bandwidth for an efficiency higher than 63%. Additionally, the maximum output power was 14.45 W at 1.7 GHz.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.202-207
• /
• 2016

장대 터널 및 급곡선 구간과 같은 시계 확보가 어려운 지역에서 위험 및 안전 정보를 함께 공유하기 위해서는 기관사, 열차 관제사 및 현장 작업자 사이에 보조적인 실시간 열차 정보 통신시스템의 개발이 필요하다. 이에 적합한 열차 정보 통신시스템을 개발하기 위하여 본 연구에서는 작은 노이즈와 신호 감쇄를 동시에 갖도록 하는 레일 전력선 통신을 제안하였다. 이에 대한 레일 전력선 통신의 기초 연구 일환으로서, 본 통신기법의 전송 특성을 향상할 수 있는 레일에 대한 임피던스 측정 및 정합특성 평가가 중요하다. 본 연구에서는 자체 제작한 임피던스 정합 트랜스포머와 네트워크 분석기를 이용하여 레일에 대한 반사 및 전파 특성을 평가하였다. 대향 접속방식의 임피던스 반사특성 시험결과로부터 레일 전력선 통신에 적합한 정합용 트랜스포머의 정합비율은 1:3.28임을 알 수 있었다. 또한, 제작한 임피던스 정합용 트랜스포머는 레일 전력선통신에서 투과 신호 전송을 향상할 수 있음을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제6권6호
• /
• pp.776-785
• /
• 2011

Since the Internet-based real-time Global Positioning System(GPS) synchronized widearea power system frequency monitoring network (FNET) was proposed in 2001, it has been monitoring the power system frequency in interconnected United States power systems and numerous interesting behaviors have been observed, including frequency excursion propagation. We address the consistency of a frequency excursion detection order of frequency disturbance recorders in FNET in relation to the same generation trip, as well as the ability to recreate by power systems dynamic simulation. We also propose a new method, as an application of FNET measurement, to locate a tripped generator using power systems dynamic simulation and wide-area frequency measurement. The simulation database of all the possible trips of generators in the interconnected power systems is created using the off-line power systems dynamic simulation. When FNET detects a sudden drop in the monitoring frequency, which is most likely due to a generation trip in power systems, the proposed algorithm locates a tripped generator by finding the best matching case of the measured frequency excursion in the simulation database in terms of the frequency drop detection order and the time of monitoring points.

• 한국컴퓨터정보학회논문지
• /
• 제18권9호
• /
• pp.11-19
• /
• 2013

프로세서와 메모리 시스템 사이의 속도 차이를 완화하기 위하여 오늘날의 컴퓨터 시스템은 대부분 캐시 시스템을 사용하고 있다. 하지만 소비 전력 측면에서 캐시 메모리는 전체 시스템 측면에서 큰 비중을 차지한다. 본 논문에서는 캐시 시스템의 전력을 줄이는 방안 가운데 하나로 지역 버퍼와 주소 압축을 통한 저전력 캐시 설계 기법을 제안한다. 주소 압축을 위해 사용되는 부분태그 캐시는 전력 소모량을 최소화하기 위해서 전체 태그를 쓰기보다는 태그의 작은 부분을 사용함으로써 소비 전력을 줄이도록 하는 기법이다. 본 논문에서는 기존의 여러 주소 압축 캐시 연구에서의 문제점들을 분석하여 그것을 보완할 수 있는 새로운 기법을 제안한다. 제안된 기법은 지역성이 높은 내장형 응용프로그램의 특징을 활용한 것으로, 지역 버퍼와 지역 실패 버퍼를 활용한 새로운 형태의 캐시 주소 압축 기법이다. 모의실험 결과, 제안된 기법은 전체적인 성능의 감소 없이 평균 18%의 에너지 감소를 보였다.

• 제어로봇시스템학회논문지
• /
• 제5권3호
• /
• pp.363-369
• /
• 1999

In this paper, we design the robust $H_{\infty}$ controller for water level control of steam generator using a mixed $H_{\infty}$ optimization with model-matching method. Firstly we choose the desired model which has good disturbance rejection performance. Secondly we design a stabilizing controller to keep the model-matching error small and also provide sufficiently large stability margin against additive perturbations of the nominal plant. Simulation results show that proposed robust $H_{\infty}$ controller at specific power operation has satisfactory performances against the variations of load power, steam flow rate, primary circuit coolant temperature, and feedwater temperature. It can be also observed that the proposed robust $H_{\infty}$ controller exhibits better robust stability than conventional PI controller.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.304-311
• /
• 1998

An algorithm to enhance spectra matching of acceleration time history used in the seismic analysis of nuclear power plants(NPP) is proposed. The new scheme provides the solution on the highly fluctuating and over conservatism problems that happened in order to satisfy design spectrum enveloping criteria in the traditional method. To obtain optimized spectrum for a time history, a spectrum matching procedure that adapts a system identification technique is also developed. The algorithm also introduces maximum displacement control, baseline correction, clipping and raising of maximum peak of time history, and power spectral density (PSD) control of time history. It is verified through numerical examples that this new scheme can definitely generate acceleration time history, closely matching the target spectra and satisfying other stipulated requirements.

• 한국전자파학회논문지
• /
• 제26권6호
• /
• pp.593-596
• /
• 2015

본 논문은 무선전력전송 시스템에 활용할 수 있도록 낮은 드레인 전압에서 높은 효율을 가지는 class E 전력증폭기를 설계하였다. 붕괴전압이 40 V인 Si MOSFET을 이용하여 드레인 바이어스 전압이 12.5 V인 13.56 MHz 전력증폭기를 설계하였다. 출력 전력 및 효율을 개선하기 위하여 품질계수가 우수한 솔레노이드 인덕터를 제작하여 출력 정합회로에 사용하였다. 발진 방지와 간단한 회로 구성을 위하여 인덕터와 저항으로 입력 정합회로를 구성하였다. 측정 결과, 제작된 전력증폭기는 13.56 MHz에서 38.6 dBm의 출력전력과 16.6 dB의 전력이득, 그리고 89.3 %의 높은 전력부가효율을 보였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권4호
• /
• pp.216-224
• /
• 2009

The endless scaling down of the semiconductor process made the impact of the power network noise on the performance of the state-of-the-art chip a serious design problem. This paper compares the performances of two popular circuit reduction approaches used to improve the efficiency of power network noise analysis: moment matching-based model order reduction (MOR) and node elimination-based MOR. As the benchmarks, we chose PRIMA and R2Power as the matching-based MOR and the node elimination-based MOR. Experimental results indicate that the accuracy, efficiency, and memory requirement of both methods very strongly depend on the structure of the given circuit, i.e., numbers of the nodes and sources, and the number of moments to preserve for PRIMA. PRIMA has higher accuracy in general, while the error of R2Power is also in the acceptable range. On the other hand, PRIMA has the higher efficiency than R2Power, only when the numbers of nodes and sources are small enough. Otherwise, R2Power clearly outperforms PRIMA in efficiency. In the memory requirement, the memory size of PRIMA increases very quickly as the numbers of nodes, sources, and preserved moments increase.