• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.306-306
• /
• 2013

본 연구에서는 저가격, 대면적화를 위한 롤투롤 스퍼터를 이용하여, Index matching (히가시 야마 $125{\mu}m$)의 PET 기판 위에 ITO 박막을 성막 시킨 정전용량 방식의 터치 패널용 투명 전극에 대하여 전기적, 광학적, 구조적, 표면적 특성을 분석하였다. ITO 타겟은 미쓰이사(일본의) 주석 함량 5 wt%을 사용하였으며, 롤투롤 스퍼터는 degassing챔버와 스퍼터 챔버가 한 시스템에 구성되었고, Degassing 챔버는 좌우측의 Rewinder/Unwinder 롤러에 의해 감고 풀어지는 PET 기판의 수분 및 가스를 중앙부에 위치한 히터를 통해 제거하며, 수분 제거 후 스퍼터 챔버로 옮겨진 1,250 mm폭의 PET기판을 Unwinder/Rewinder 롤러에 장착하며, Unwinder 롤러로부터 풀려진 PET 기판은 guide 롤러를 거쳐 cooling drum과의 물리적 접촉에 의해 PET 기판의 냉각이 일어나게 된다. ITO 캐소드 전에 장착된 할로겐 히터 상부로 기판이 지나가면서 열처리가 진행되고 열처리 후 두 개의 ITO 캐소드 상부를 지나면서 연속적으로 ITO 박막이 PET 기판에 성막 되게 된다. ITO 박막의 주요 성막 변수인 DC Power, Ar/$O_2$ 가스 유량비, 기판의 속도는 최적으로 고정하고, 성막된 ITO박막의 필름을 각각 고온 챔버에서 $150^{\circ}C$도에서 10 min에서 60 min 동안 각각 열처리를 통한 내열성 테스트를 진행하여 ITO 필름의 특성 향상을 비교 분석하였다. 분석을 위해 전기적 특성은 four-point probe로 측정했고, 투과도는 Nippon Denshoku사(社)의 COH-300A를 이용해 가시광(550 nm)에서 분석했고, FE-SEM으로 ITO박막의 표면 상태를 분석하였다. 또한 Rolling Tester (Z-300)를 이용하여 기계적 안정성을 분석하였다.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.38-44
• /
• 2014

In this paper, we designed a multiband monopole antenna for next-generation WLAN system. In conventional WLAN system, UWB antennas were used together, and, because the radiation occurs in different parts depending on the antenna structure, it has the disadvantage of having an unstable impulse response characteristic due to dispersion characteristics. Although a UWB antenna that has suitable radiation pattern for WLAN band, it does not have good impedance matching and has severe echo. Therefore, in this paper, a monopole antenna was designed by using CPW power feed so that various impedances can be easily implemented when designing an antenna and more parameters can be derived that can be used for design for optimal performance.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.6
• /
• pp.285-292
• /
• 2017

There are technological, operational and environmental constraints at tactical edge, which are disconnected operation, intermittent connectivity, and limited bandwidth (DIL), size, weight and power (SWaP) limitations, ad-hoc and mobile network, and so on. To overcome these limitations and constraints, we use service-oriented architecture (SOA) based technologies. In our research, we propose a hierarchical mission service model that supports service-oriented mission planning and execution in order for a commander to operate various SW required for mission in battlefield environment. We will also implement development tools that utilize the workflow technology and semantic capability-based recommendation and apply them to combat mission scenarios to demonstrate effectiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1199-1205
• /
• 1993

It has been well known that the assumption of full state availability is one of the most important restrictions to the practical realization of VSCS. And several attempts to alleviate the assumption had been made. However, it is not easy to find a positive scheme among them. Recently, an output feedback variable structure control system(OFVSCS) was proposed and the effectiveness of the scheme was validated for the disturbance free systems. The purpose of this study is to propose a robust OFVSCS that have the robust properties against process parameter variations and external distrubances by extending the basic OFVSCS and to evaluate its control performances through power system stabilizer design example. The ROFVSCS is composed of dynamic switching function and output feedback switching control inputs that are constructed by the use of the unknown vector modeling technique. With the proposed scheme, existence of sliding mode is guaranteed and any nonzero bias can be suppressed in the face of disturbances and process parameter variations as far as well-known matching condition is satisfied. Due to the fact that the ROFVSCS is driven by small number of measured informations, the practical application of VSCS for the systems with unmeasurable states and for high order systems that conventional schemes cannot be applied, is possible with the proposed scheme. It is noticeable that the implementation cost of VSCS can be considerably reduced without sacrifice of control performances by adopting ROFVSCS since there is no need measure the states with high measurement cost.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.2
• /
• pp.29-35
• /
• 1998

This paper describes architectures and design of a SIMD type parallel image processing chip called SliM-II. The chiphas a linear array of 64 processing elements (PEs), operates at 30 MHz in the worst case simulation and gives at least 1.92 GIPS. In contrast to existing array processors, such as IMAP, MGAP-2, VIP, etc., each PE has a multiplier that is quite effective for convolution, template matching, etc. The instruction set can execute an ALU operation, data I/O, and inter-PE communication simulataneously in a single instruction cycle. In addition, during the ALU/multiplier operation, SliM-II provides parallel move between the register file and on-chip memory as in DSP chips, SliM-II can greatly reduce the inter-PE communication overhead, due to the idea a sliding, which is a technique of overlapping inter-PE communication with computation. Moreover, the bandwidth of data I/O and inter-PE communication increases due to bit-parallel data paths. We used the COMPASS$^{TM}$ 3.3 V 0.6.$\mu$m standrd cell library (v8r4.10). The total number of transistors is about 1.5 muillions, the core size is 13.2 * 13.0 mm$^{2}$ and the package type is 208 pin PQ2 (Power Quad 2). The performance evaluation shows that, compared to a existing array processors, a proposed architeture gives a significant improvement for algorithms requiring multiplications.s.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.499-504
• /
• 2017

A UHF CMOS variable gain low-noise amplifier (LNA) is designed for mobile digital TV tuners. The proposed LNA adopts a feedback topology to cover a wide frequency range from 474 to 868 MHz, and it supports the notch filter function for the interoperability with the GSM terminal. In order to handle harmonic distortion by strong interferers, the gain of the proposed LNA is step-controlled while keeping almost the same input impedance. The proposed LNA is implemented in a $0.11{\mu}m$ CMOS process and consumes 6 mA at a 1.5 V supply voltage. In the measurement, it shows the power gain of greater than 16 dB, NF of less than 1.7 dB, and IIP3 of greater than -1.7 dBm for the UHF band.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.334-334
• /
• 2010

In order to fabricate the multilayer piezoelectric transformer by tape casting method, we investigated the effect of $TiO_2$ and PZT powder additions on the Ag/Pd electrode. Meanwhile, effects of $TiO_2$ and PZT powder additives on the microstructure and electrical properties of Ag/Pd electrode were investigated in detail. In addition, the multilayer piezoelectric transformers were fabricated and the characteristics with various load resistance were measured at resonance frequency. The voltage step-up ratio was continuously change with increasing input voltage and load resistance, and then output voltage and powers were increased with increasing input voltage at matching impedance. The temperature rise of multilayer piezoelectric transformers were increased with increasing input voltage and load resistance. Meanwhile, multilayer piezoelectric transformers sintered at $1100^{\circ}C$ show the favorable characteristics with a power of 15 W at $100\;{\Omega}$.

• Journal of the Korean Society of Costume
• /
• v.67 no.4
• /
• pp.102-115
• /
• 2017

This study aims to investigate the role and function of costume in the ancient society by analyzing the jade decorations, 'Gui', 'Bi', and 'Hwang,' recorded in "Zhouli". The method of study consisted of researching the record book "Zhouli" and comparing the antiquities with the images of the jades. Firstly, the jade decorations were different depending on class. The class system in Zhou dynasty was made up of 6 grades - emperor, duke, marquis, count, viscount, and baron. The jade decorations used by people in these grades were called 'Gui', 'Bi', and 'Hwang'. Secondly, this study grasped the system of 'Gui', 'Bi', and 'Hwang.' It identified 7 types of duties by matching the decorations on the jade to specific institutions. 'Gui', 'Bi', and 'Hwang' played a huge role in forming and maintaining to order and system during the chaotic Zhou dynasty. In addition, it became an essential part of understanding status, society, and political structure within a family power structure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2487-2495
• /
• 2000

The acoustic characteristics of expansion chamber will be changed with the variation of inlet/outlet location due to the higher order acoustic mode in a high frequency in which the plane wave theory is not available. In this paper, the acoustic performance of reactive type expansion chamber with circular cross-section is analyzed by using the modified mode matching theory. The sensitivity analysis of four-pole parameters with respect to the location of inlet and outlet is also suggested to increase the acoustic performance. The acoustic power transmission coefficient is used as cost function, and the location of inlet and outlet is used as design variables. The steepest descent method and SUMT algorithm are used for optimization technique. Several results showed that the expansion chamber with optimally located inlet/outlet had better acoustic performance than concentric expansion chamber.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.762-766
• /
• 2005

This study was conducted to establish an individual identification system comprising of 19 microsatellite markers located on different bovine autosomes. The markers were typed on 257 animals from five cattle breeds. In total, 112 alleles were detected from the genotyping of 19 microsatellite markers. The average heterozygosities ranged from 0.292 to 0.824 and the polymorphic information content (PIC) ranged from 0.274 to 0.817 in Hanwoo. We found that there were differences in allele frequencies in Hanwoo when compared with other cattle breeds. The calculated cumulative power of discrimination (CPD) was 99.999% when nine microsatellite loci were used for analysis in the individual identification system. Also the matching probability, the probability that two unrelated animals would show the same genotypes, was estimated to be $0.44{\times}10^{-9}$. Therefore, the nine markers used in this study will be used for individual identification in two million Hanwoo individuals.