• 비파괴검사학회지
• /
• 제30권1호
• /
• pp.1-5
• /
• 2010

음향방출법은 압력용기 구조에서 존재하는 결함이나 누출을 탐지하거나 모니터링하는데 유용한 도구로 부상하였다. 본 연구에서는 브레그 격자에 근거한 음향방출센서 시스템이 개발되었다. 다양한 길이의 센싱부를 포함하는 다양한 형태의 광섬유 브레그 격자센서가 제작되었고 PZT 펄서와 연필심 파괴를 이용하여 시험되었다. 두 가지 형태의 센서부착법이 사용되었다. 첫째는 광섬유 브레그 격자센서가 접착제를 이용하여 표면에 완전히 부착되는 방법이고 둘째는 센서의 한쪽 부분만 표면에 부분적으로 고정하고 다른 쪽은 외팔보와 같이 작동하도록 하는 방법이다. 이렇게 함으로써 센싱부의 길이에 비례하는 고유진동수를 갖는 광섬유 브레그 격자센서를 구성할 수 있다. 본 연구에 사용된 센서 시스템의 최종 목적은 원자력발전소 상부 관통관의 균열이나 누출을 탐지하는 온라인 모니터링 시스템에 사용하는 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.71-71
• /
• 2012

As the critical dimensions of integrated circuits are scaled down, the line width and spacing between the metal interconnects are made smaller. The dielectric film used as insulation between the metal lines contributes to the resistance-capacitance (RC) time constant that governs the device speed. If the RC time delay, cross talk and lowering the power dissipation are to be reduced, the intermetal dielectric (IMD) films should have a low dielectric constant. The introduction of Cu and low-k dielectrics has incrementally improved the situation as compared to the conventional $Al/SiO_2$ technology by reducing both the resistivity and the capacitance between interconnects. Some of the potential candidate materials to be used as an ILD are organic and inorganic precursors such as hydrogensilsequioxane (HSQ), silsesquioxane (SSQ), methylsilsisequioxane (MSQ) and carbon doped silicon oxide (SiOCH), It has been shown that organic functional groups can dramatically decrease dielectric constant by increasing the free volume of films. Recently, various inorganic precursors have been used to prepare the SiOCH films. The k value of the material depends on the number of $CH_3$ groups built into the structure since they lower both polarity and density of the material by steric hindrance, which the replacement of Si-O bonds with Si-$CH_3$ (methyl group) bonds causes bulk porosity due to the formation of nano-sized voids within the silicon oxide matrix. In this talk, we will be introduce some properties of SiOC(-H) thin films deposited with the dimethyldimethoxysilane (DMDMS: $C_4H_{12}O_2Si$) and oxygen as precursors by using plasma-enhanced chemical vapor deposition with and without ultraviolet (UV) irradiation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.285-285
• /
• 2011

EUVL (Extreme Ultra Violet Lithography) is one of competitive lithographic technologies for sub-30nm fabrication of nano-scale Si devices that can possibly replace the conventional photolithography used to make today's microcircuits. Among the core EUVL technologies, mask fabrication is of considerable importance since the use of new reflective optics having a completely different configuration compared to those of conventional photolithography. Therefore new materials and new mask fabrication process are required for high performance EUVL mask fabrication. This study investigated the etching properties of SnO2 (Tin Oxide) as a new absorber material for EUVL binary mask. The EUVL mask structure used for etching is SnO2 (absorber layer) / Ru (capping / etch stop layer) / Mo-Si multilayer (reflective layer) / Si (substrate). Since the Ru etch stop layer should not be etched, infinitely high selectivity of SnO2 layer to Ru ESL is required. To obtain infinitely high etch selectivity and very low LER (line edge roughness) values, etch parameters of gas flow ratio, top electrode power, dc self - bias voltage (Vdc), and etch time were varied in inductively coupled Cl2/Ar plasmas. For certain process window, infinitely high etch selectivity of SnO2 to Ru ESL could be obtained by optimizing the process parameters. Etch characteristics were measured by on scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analyses. Detailed mechanisms for ultra-high etch selectivity will be discussed.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.255-263
• /
• 2013

Purpose: It is not easy to drive a rice-transplanter avoiding underlapped or overlapped transplanting in paddy fields. An automated guidance system for the riding-type rice-transplanter would be necessary to operate the rice-transplanter autonomously or to assist the beginning drivers as a driving aid. Methods: A prototype of guidance system was composed of embedded computers, RTK-GPS, and a power-steering mechanism. Two Kalman filters were adopted to overcome sparse positioning data (1 Hz) from the RTK-GPS. A global Kalman filter estimated the posture of rice-transplanter every one second, and a local Kalman filter calculated the posture from every new estimation of the global Kalman filter with an interval of 200 ms. A PID controller was applied to the row-following mode control. A control method of U-turning mode was developed as well. A stepping motor with a reduction gear set was used to rotate the shaft of steering wheel. Results: Test trials for U-turning and row-following modes were done in a paddy field after some parameters have been tuned at the ground speed range of 0.3 ~ 1.2 m/s. The minimum RMS error of offset was 3.13 cm at the ground speed of 0.3 m/s while the maximum RMS error was 13.01 cm at 1.2 m/s. The offset RMS error tended to increase as the ground speed increased. The target point distance, LT also affected the system performance and PID controller parameters should be adjusted on different ground speeds. Conclusions: A target angle-based PID controller plus stationary steering angle controller made it possible for the rice-transplanter to steer autonomously by following a reference line accurately and even on U-turning mode. However, as condition in paddy fields is very complicated, the system should control the ground speed that prevents it from deviating too much due to ditch and slope.

• 스마트미디어저널
• /
• 제4권1호
• /
• pp.33-38
• /
• 2015

분 논문에서는 전위계 센서를 이용한 비접촉식 동작인식거리를 확장하기 위해 1K Hz 이하의 극저주파 EMI를 제거하는 기법과 제스처 동작 시작점 추출을 위한 PLN(Power Line Noice)을 이용하는 기법을 제시한다. 스마트기기 상에 장착된 전위계차 센서 주변에서 발생하는 극저주파대역의 전기장의 세기를 측정하여 효율적인 센서의 배치를 통해 EMI를 제거하는 동시에 60Hz 대역의 PLN 잡음은 오히려 동작 시작점 검출을 위하여 이용하는 기법을 제안한다. 이 후, 접지를 통해 스마트 기기 및 센서의 회로에서 발생하는 전원선 잡음을 제거하고, 스마트 TV와 센서의 사이를 차폐시킴으로써 스마트 기기에서 발생하는 전기적 잡음을 제거한다. 마지막으로 필터기법을 이용하여 남아있는 미세 잡음을 제거한다. 전위계차 센서를 스마트기기의 비접촉식 원격제어에 활용하기 위한 극저주파대역 EMI의 효과적인 제거 기법 및 성능을 분석하였으며, 또한 전위계차 센서의 비접촉식 응용에 난제중 하나인 동작시작점 검출을 위한 효과적인 방법을 제시하여 제스처 인식거리를 실제 응용가능한 3m 이상으로 확장할 수 있음을 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권5호
• /
• pp.121-128
• /
• 2012

이 논문에서는 대표적 수치해석에의 균열처리 방법으로 손상모델 기반의 분산균열모델을 체택하여 구조내력을 산정하였다. 또한 전력구 구조물의 실구조 모델링을 위해 3차원 해석방법을 택하였으며 3차원 콘크리트 구성모델로는 현재 3차원 모델중 콘크리트의 다축압축, 인장균열을 효과적으로 모사하는 미소면 모델(Microplane model)을 재료모델로 사용하여 비선형 유한요소해석을 수행하였다. SFRC의 인장연화곡선을 얻기 위해 역해석법을 사용하였으며, 역해석으로 구한 인장연화곡선이 실험결과와 아주 잘 일치함을 보였다. 하중-균열폭 관계를 입력값으로 사용한 역해석 결과와 하중-CMOD 관계를 사용한 역해석 결과는 서로 잘 일치하는 경향을 나타냈다. 이 논문에서는 실험으로부터 측정된 균열폭 데이터와 수치해석시의 손상지수와의 관계를 도출하여으며, 이와 같은 결과는 향후 균열탐사를 통한 구조물의 잔존 구조내력 산정에 적용할 수 있으리라 판단된다.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.163-170
• /
• 2011

Analysis of load on major parts of the tractor power drive line is critical for efficient and optimum design of a tractor. The purpose of this study was to evaluate severeness of the tractor PTO driving axle during rotary tillage operation. First, S-N (stress vs. number of cycle) curve of a PTO driving gear was obtained through the fatigue life test using a PTO dynamometer. Second, PTO severeness was evaluated during rotary tillage operation. Torque measurement system was constructed with strain-gauge sensors to measure torque of a PTO axle, an I/O interface to acquire the sensor signals, and an embedded system to calculate severeness. The severeness of PTO was analyzed using measured torque data during rotary tillage. In the PTO gear life fatigue test, breakage time and bending stress of the gear were measured by tooth widths and torque change during the fatigue life test. The S-N curve showed a good linear relationship between bending stress and number of cycle (life) with a coefficient of determination of 0.97. For PTO severenss evaluation, rotary tillage operations were conducted at two PTO rotational speeds (level-1, level-2) under different paddy and upland field sites with different soil conditions. Results of averaged relative severeness for PTO level-1 and PTO level-2 were 1.96 and 3.34, respectively, at paddy field sites, and they were 1.36 and 2.51, respectively, at upland field sites. The results showed that the PTO driving axle experienced more severe load during rotary tillage at paddy fields than at upland sites, and relative severeness was greater at the higher PTO rotational speed under all of the soil conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권8호
• /
• pp.1933-1954
• /
• 2013

Multiple wireless devices are being widely deployed in Intelligent Transportation System (ITS) services on the road to establish end-to-end connection between vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) networks. Vehicular ad hoc networks (VANETs) play an important role in supporting V2V and V2I communications (also called V2X communications) in a variety of urban environments with distinct topological characteristics. In fact, obstacles such as big buildings, moving vehicles, trees, advertisement boards, traffic lights, etc. may block the radio signals in V2X communications. Their impact has been neglected in VANET research. In this paper, we present a realistic and efficient radio propagation model to handle different sizes of static and moving obstacles for V2X communications. In the proposed model, buildings and large moving vehicles are modeled as static and moving obstacles, and taken into account their impact on the packet reception rate, Line-of-sight (LOS) obstruction, and received signal power. We use unsymmetrical city map which has many dead-end roads and open faces. Each dead-end road and open faces are joined to the nearest edge making a polygon to model realistic obstacles. The simulation results of proposed model demonstrates better performance compared to some existing models, that shows proposed model can reflect more realistic simulation environments.

• 패션비즈니스
• /
• 제15권4호
• /
• pp.1-15
• /
• 2011

Femme Fatale in Film Noir is a wicked woman character who seduces the male partner to a ruin. In the film, the dress style is of extreme importance for the personality creation of the character as well as the development of the plot. With this background, I have looked over the Femme Fatale dress style that appears in the movie . First, it expresses Femme Fatale which stresses the feminine trait by a dress style with enlarged chest and hip parts and long, slim silhouette with tight waist and knee line. Second, the Femme Fatale with pretended purity presents narcissistic satisfaction like a saint virgin by wearing a neck-high one-piece dress embellished with frills, but the use of mirror represents self-alienation and the vanity of purity. Third, the Femme Fatale with its military dress style presents authoritative sternness which leads seduced male into ruin with its destructive power. Fourth, wearing jersey type or knitted wear that sticks to the body presents sensual Femme Fatale. Fifth, the tulle, chiffon, and white handkerchief used for the creation of grotesque Femme Fatale represents harmlessness and prohibition of immoral behavior, and the black gloves, pillbox, and the number on the tulle present her uneasy psychological state from the fear of being discovered after murdering her husband. On the other hand, the see-through tulle presents alluring sensual beauty. Sixth, the combination of the dialogue in the final sequence and drapery type as in Greek goddess represents the saint virgin of salvation who acknowledges her own fault and returns to her purity again. In addition, accessories and others made from shining material represent hidden conspiracy through simple dress and contradictory dynamics, and shoes embellished with bonbon, etc represent sexual implications in connection with male.

• 한국통신학회논문지
• /
• 제23권7호
• /
• pp.1777-1784
• /
• 1998

광 패킷 어드레스 처리기의 광섬유 지연선로 정합여파기 출력으로 나타나는 M-ary 상관 펄스를 검출하기 위해 EDFA 전치증폭기를 사용한 광 패킷 교환노드의 패킷 오율을 측정하였다. 어드레스 처리기에 사용된 PIN 다이오드의 잡음 등가전력, EDFA의 잡음지수와 이득, 그리고 광여파기의 대역폭이 노드의 패킷 오율에 미치는 영향을 비교 평가하였다. PIN 다이오드의 잡음 등가 전력과 EDFA의 이득은 패킷 오율 변화에 영향을 거의 미치지 않았으며, 통과 대역폭이 패킷 전송 속도의 약 10배 보다 적은 광 여파기를 사용한 경우에도 패킷 오율의 변화를 무시할 수 있었다. 그러나 EDFA의 잡음 지수가 증가하면, 본 논문에서 고려된 모든 전송속도와 어드레스 코드셋에서 잡음지수 증가량만큼 파워 페널티가 발생하였다.