• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.103-105
• /
• 2020

본 논문은 저압 배전선로의 전압 조정을 위해 상태관측기와 반복제어기를 적용한 무효전력 제어 알고리즘을 제안하였으며, 시뮬레이션 및 실험으로 이를 검증하였다. 무효전력 보상기는 단상 풀 브리지 인버터 구조이며 전압제어 시 DC 전압을 일정하게 유지하기 위한 전압 제어와 전류 제어기로 구성된다. DC 리플 보상방식은 상태관측기로 만들어낸 출력 값, DC 링크 리플 성분을 보상한 값을 전압제어기 피드백 성분으로 사용하여 전압을 일정하게 제어하였다. 무효전력을 안정하게 주입하기 위해 기본파 성분은 PI제어기로 제어하고 반복제어기를 PI제어기와 병렬로 연결하여 저차 고조파를 보상하였다. 반복 제어기는 동기 좌표계에서 구현됨에 따라 홀수파 고조파 성분을 제거하는 역할을 한다. 제안한 제어기법은 5kVar 단상 인버터 시스템으로 실험을 진행하였으며, 상태관측기와 반복제어기가 적용된 경우 THD가 9%에서 2%로 향상됨을 확인함으로써 제안한 알고리즘의 성능을 검증하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.7-13
• /
• 2010

For swiftness and economic feasibility of parcel delivery, optimal location of mail exchanging centers considering not only section delivery distance but also some weights like the number of delivery vehicles are necessary. In this paper, a mechanism with section delivery distance and vehicle number for locating of mail distribution centers which connect some mail centers of major cities in Republic Korea by applying GOSST theory is proposed. This mechanism for locating mail exchange centers can make the total delivery distance of postal matters less than not only present method which assigns Daejun as mail exchange center, but also Steiner tree method which does not consider weights like number of delivery vehicles. The mechanism is good for protecting the environment as well as rapid and economic delivery. In experiment, the proposed mechanism could curtail total delivery distance by 2.52 percentages compared with Steiner tree method and by 6.66 percentages compared with present method. The mechanism may be used in electric power transmission routing, distribution line topology design, power relay station locating where various voltages and other weights should be considered.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.85-93
• /
• 2008

In 22.9[kV]-y distribution systems, underground cables are provided with 3-wire loop multiple-point ground in which each coaxial-neutral line of the distribution cable lines(A, B, C phases) is 3-wire common grounded at every connecting section. In the underground cable distribution systems, circulating current flows in the coaxial-neutral lines and its magnitude amounts to about $40{\sim}50[%]$ load currents, even though loads are balanced. This paper presents a new ground method to overcome such a problem and a comprehensive analysis in tows of current capacity of power cables, induced voltage of cable sheath, and electromagnetic interference voltage from power cable lines.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.75-81
• /
• 2007

In this paper, the survey and the analysis of domestic and foreign for on-line monitoring system at low voltage facilities example for value added service about electrical safety were executed. According to survey, in Japan, they are executing the on-line electrical facilities monitoring in based on IT basic law for the information of society construction and not only electrical safety but also value added service such as alarm for earthquake, security are being done. In USA and Europe using power line communication(PLC), the on-line observation and building district management service were being realized. Observing the domestic case, electrical safety related with service such as distribution panel product incorporating load management and leakage current measurement was being executed in some companies. From the survey, it is necessary to improve on the law and the system for market activity in domestic.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.6-13
• /
• 2017

This study examines the effect of the type and number of orifices in an in-line mixer to improve the mixing performance and pressure loss. Recently, in-line non-power-consuming mixers have been increasingly used to complement mechanical mixers, which have a long dwell time, noise, excessive energy consumption, and high maintenance costs. An in-line mixer with an orifice for efficient mixing in water treatment was examined by numerical analysis using the commercial code FLUENT. The flow characteristics of pressure loss and velocity distribution within the mixer and the mixing efficiency were compared with and without the orifices. The CFD results show that the mixing efficiency was improved, but the pressure loss was increased by the in-line mixer with an orifice. A sensitivity study was also done on the principal parameters.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.121-127
• /
• 2016

We propose a algorithm to calculate power factor of fundamental waveform in an environment where the voltage and current have been distorted by harmonics. In the proposed power factor computation algorithm, voltage and current are converted to rotating DQ reference frame, and power factor is calculated from active power and reactive power. We compare the proposed method with the conventional power factor measurement method as mathematically. In a condition that voltage and current are distorted by harmonics, the proposed method accurately measure the power factor of fundamental wave, and it is confirmed by simulation using MATLAB. If the proposed power factor measurement method is applied to an automatic power factor control system, a power factor compensation performance can be maximized in harmonic distortion environment. As a result, it is possible to reduce electricity prices, reduce line loss, increase load capacity, ensure the transmission margin capacity, and reduce the amount of power generation.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.320-330
• /
• 2012

In this paper, we investigate the power integrity of grid structures for power and ground distribution on printed circuit board (PCB). We propose the 2D transmission line method (TLM)-based model for efficient frequency-dependent impedance characterization and PCB-package-integrated circuit (IC) co-simulation. The model includes an equivalent circuit model of fringing capacitance and probing ports. The accuracy of the proposed grid model is verified with test structure measurements and 3D electromagnetic (EM) simulations. If the grid structures replace the plane structures in PCBs, they should provide effective shielding of the electromagnetic interference in mobile systems. An analytical model to predict the shielding effectiveness (SE) of the grid structures is proposed and verified with EM simulations.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.500_502
• /
• 2009

한전의 분산전원 연계규정에 따르면 수전고객은 변압기 결선이 ${\triangle}-Yg$ 주로 사용되나 분산전원 연계선로는 변압기 결선이 $Yg-{\triangle}$ 형태로 연계되어 있다. 전원계통 고장시 ${\triangle}-Yg$ 결선 방식은 역조류가 발생되지 않으나, $Yg-{\triangle}$ 결선방식은 중성선을 통해 최대 2000[A]까지 역으로 고장전류를 공급한다[1]. 이때 보호계전기 오동작뿐만 아니라 연계용변압기, 케이블 등 설비보호를 위해서는 고장전류의 크기를 반드시 제한해야 된다. 본 논문은 연계용변압기에 의해서 공급되는 중성선의 과전류 현상을 해석하고, 이론적으로 해석된 결과를 PSCAD/EMTDC로 검증하였으며 고장전류의 크기를 저감하기 위해 NGR 저항 값을 조절하면서 고장전류의 크기를 시뮬레이션 하였다. 분산전원 연계선로에서 영상분 고장전류의 크기를 저감하는 방법으로 연계용 변압기($Yg-{\triangle}$) 1차 측에 중성선에 NGR(Neutral Grounding Reactor; 중성점 접지리액터)을 설치해야 하며 영상임피던스를 조절하는 방법을 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1789-1794
• /
• 2014

This paper suggests an application method for a superconducting fault current limiter (SFCL) using an evaluation index to estimate the risk regarding the short-circuit capacity of the circuit breaker (CB). Recently, power distribution systems have become more complex to ensure that supply continuously keeps pace with the growth of demand. However, the mesh or loop network power systems suffer from a problem in which the fault current exceeds the short-circuit capacity of the CBs when a fault occurs. Most case studies on the application of the SFCL have focused on its development and performance in limiting fault current. In this study, an analysis of the application method of an SFCL considering the risk of the CB's short-circuit capacitor was carried out in situations when a fault occurs in a loop network power system, where each line connected with the fault point carries a different current that is above or below the short-circuit capacitor of the CB. A loop network power system using PSCAD/EMTDC was modeled to investigate the risk ratio of the CB and the effect of the SFCL on the reduction of fault current through various case studies. Through the risk evaluations of the simulation results, the estimation of the risk ratio is adequate to apply the SFCL and demonstrate the fault current limiting effect.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.420-421
• /
• 2008

배전설비의 안정성검토 및 조형물과 충분한 측방이격거리 확보검토를 위해 일반지역 직선선로에서 2400mm 완철을 설치한 보통장주와 편출장주 일반용 콘크리트 전주의 강도를 검토하였으며, 편출장주시 완철의 길이변화가 전주강도에 미치는 영향을 살펴보았다. 표준경간[3]에서 보통장주형태의 전주는 대용량선로의 전선(ACSR/AW-OC $240mm^2$)을 설치한 경우에도 허용강도이내였으며, 표준경간에서 편출장주 형태의 전주는 보통장주일때 보다 전주의 휨모멘트는 증가하였고 일반선로 ACSR/AW-OC$160mm^2$ 이하의 전선을 설치한 경우 허용강도를 갖게 됨을 알 수 있었다. 또한, 편출장주 완철의 길이를 2400mm에서 3200mm로 증가시킨 경우, 전주의 휨모멘트는 증가하였으며, 전주는 표준경간이 40M 이하에서 대용량선로의 전선을 설치한 경우에도 허용강도를 갖게 됨을 알 수 있었다.