• Transactions on Electrical and Electronic Materials
• /
• v.6 no.6
• /
• pp.276-279
• /
• 2005

Influences of sustain pulse-width on electrical characteristics and luminous efficiency are experimentally investigated for surface discharge of AC-PDP. A square pulse with variable duty ratio and fixed rising time of 300 ns has been used in the experiment. It is found that the memory coefficient is significantly increased at the critical pulse-width. And the wall charges and wall voltages as well as capacitances are experimentally measured by Q- V analysis method along with the voltage margin relation, in terms of the sustain pulse-width in the range of $1{\mu}s$ to $5{\mu}s$ under driving frequency of 10 kHz to 180 kHz. And the luminous efficiency is also experimentally investigated in above range of sustain pulse-width with driving frequency of 10 kHz to 180 kHz. It is noted that the luminous efficiency for 10 kHz and 180 kHz are 1.29 1m/W and 0.68 1m/W respectively, since the power consumption for 10 kHz is much less than that for 180 kHz. It has been concluded that the optimal sustain pulse-width is in the range of $2.5 {\~}4.5{\mu}s$ under driving frequency range of 10 kHz and 60 kHz, and in the range of $1.5 {\~} 2.5{\mu}s$ under driving frequency range of 120 kHz and 180 kHz based on observation of memory coefficient, and wall voltage as well as luminous efficiency.

• Korean journal of communication and information
• /
• v.18
• /
• pp.7-36
• /
• 2002

This study is concerned with analysing complexity, flexibility and dynamism of social discoursive space. The developmental process of social discourse is analogous to that of a spatial structure of social discourse. Post-capitalist society has seen New-Liberalism and New-Conservatism have become dominant, resulting in the deterioration of the cultural politics of citizenship. It is argued that the position of otherness, in which those binary structures (inside/outside or centre/margin) collide and collapse, is where subversive discourse can emerge to dominant discursive power. Furthermore, it is necessary to democratize social discursive space, through which the Other becomes able to. participate in the social production, distribution and consumption of social discourse.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.3
• /
• pp.245-252
• /
• 2007

The important problems from the point of view of preventing global warming are to save the power consumption of automotive air-conditioning systems and reduce the refrigerant amount filled. To achieve such requirements, integral receiver/dryer (R/D) condensers were developed recently. Typical integral R/D condensers have extra headers that play the role of R/D. Except an extra header and somewhat complex tube array resulting from the extra header, the most integral R/D condensers have almost the same specification that tube has multi channels, fin has louvers, flow in tube is parallel, etc. When integral condensers are applied, it is known that the refrigerating effect increases, resulting from the increase of subcooling degree in condenser, and the refrigerant amount used saves. In spite of several merits, integral condensers have not been applied a lot. That is why there is an uncertainty in performance, using integral condensers. The objective of this study is to theoretically optimize the tube array in an integral R/D condenser that is really being applied to some vehicles. The tube array has a great effect on the performance of the integral condenser as well as common ones. Through computer simulation, we could see that the tube array, 14-6-3-5-3-4, in the same condenser was the best, comparing heat release rate, pressure drop, etc. to the real array, 17-5-3-3-2-5. It should be noted that the optimization is based on the condenser performance only.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.87-91
• /
• 2010

Charged micro-particles are widely used as the key components for many electrical applications such as an e-paper, a touch panel, a printer toner and an electronic ink. Among them, the e-paper is an emerging reflective type display using the charged particles that has the advantages of the extremely low power consumption and sunlight readability. To create images on the e-paper, we confine black positively-charged and white negatively-charged particles between bottom and top electrodes and selectively apply the electric field. When the Coulomb force by an applied electric field is greater than the adhesion force between the charged particle and the electrode, the particles' transition happens resulting in the change of color between black and white. Therefore, the adhesion force is a very important factor for designing and estimating e-paper's operation. In this study, we constructed a basic model for particle's transition and an adhesion force equation describing particle's transition with three different forces: electrostatic image force, Van der Waals force and gravitational force. The simulation results showed that the gravitational force is negligible for the interesting range for the charge and the radius, and the adhesion force can be strongly dependent on the particle's charge and radius.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.5
• /
• pp.617-624
• /
• 2014

Recently, photovoltaic inverter is received attention in photovoltaic with introduction of feed-in tariff. However, this inverter has problems such as inability to respond flexible at climate change due to its opening, and decrease of efficiency and lifetime due to its abnormal operation. To solve the problem, we desire to develop the eco-inverter which has a temperature control to respond easily on the change of temperature, and use the sealed structure not to affect the environment. In addition, we derive the optimal position of cooling system which is placed inside of inverter to minimize the power consumption, and proposed the effective measure to improve the efficient of inverter by deciding the number of cooling system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.6-13
• /
• 2017

This study examines the effect of the type and number of orifices in an in-line mixer to improve the mixing performance and pressure loss. Recently, in-line non-power-consuming mixers have been increasingly used to complement mechanical mixers, which have a long dwell time, noise, excessive energy consumption, and high maintenance costs. An in-line mixer with an orifice for efficient mixing in water treatment was examined by numerical analysis using the commercial code FLUENT. The flow characteristics of pressure loss and velocity distribution within the mixer and the mixing efficiency were compared with and without the orifices. The CFD results show that the mixing efficiency was improved, but the pressure loss was increased by the in-line mixer with an orifice. A sensitivity study was also done on the principal parameters.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06b
• /
• pp.308-312
• /
• 2010

휴대폰 시장은 전세계 보급률이 2007년에 75%정도를 차지할 만큼 거대하다. 이러한 휴대폰 시장은 개발도상국에서의 규모 확대와 선진국의 Second Phone 경향의 증가로 인해 지속적으로 확대되고 있다. 이제 휴대폰은 더 이상 단순한 전화기를 벗어나 통합멀티미디어화 되어가는 추세이다. 휴대폰이 통합멀티미디어 제품으로 변모함에 따라 다양한 기능을 탑재한 차세대 제품을 설계해야 하는 연구자들은 여러 요인들을 고려해야 하는데 그 중에서도 가장 중요한 요인이 바로 사용자 인터페이스와 배터리 수명이다. 휴대폰의 통합멀티미디어화는 다양한 기능과 편리한 인터페이스를 제공하지만 이로 인해, 배터리 수명은 줄어들었다. 전력소모가 많은 휴대폰의 기능을 제한하는 방안을 사용한다면 배터리 수명은 증가하겠으나, 이는 높아져 가는 소비자의 요구를 만족 시킬 수 없다. 그러므로 본 논문에서는 이와 같은 문제를 해결하기 위해서 음향적 기능과 촉각적 기능을 사용하였을 때 소모되는 전력 패턴을 분석하고자 한다. 본 논문의 실험은 벨소리(음향적 기능)의 박자별 전력 소모량과 진동(촉각적 기능)의 주기에 따른 전력 소모량, 그리고 진동벨(음향적 기능 + 촉각적 기능)은 벨소리를 포함한 진동의 길이와 주기에 따른 전력량을 측정하였다. 본 논문에서는 전력을 측정하기 위하여 인스펙터를 사용하였고 측정 휴대폰은 삼성전자의 SCH-W550 모델을 이용해서 실험을 하였다. 실험결과, 본 논문에서 실험한 세 가지 방법 중에서 진동벨을 이용할 경우 사용자 인터페이스 설계에 보다 효과적임을 확인할 수 있다.

• Transactions of the Society of Information Storage Systems
• /
• v.2 no.2
• /
• pp.130-137
• /
• 2006

The HDD(hard disk drive) using Load/unload(L/UL) technology includes the benefits which are increased areal density, reduced power consumption and improved shock resistance than those of contact-start-stop(CSS). It has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. The main objects of L/UL are no slider-disk contact or no media damage. For realizing those, we must consider many design parameters in L/UL system. In this paper, we focus on lift-off force. The 'lift-off' force, defined as the minimum air bearing force, is another very important indicator of unloading performance. A large amplitude of lift-off force increases the ramp force, the unloading time, the slider oscillation and contact-possibility. To minimize 'lift-off' force we optimizes the slider and suspension using the integrated optimization frame, which automatically integrates the analysis with the optimization and effectively implements the repetitive works between them. In particular, this study is carried out the optimal design considering the process of modes tracking through the entire optimization processes. As a result, we yield the equation which can easily find a lift-off force and structural optimization for suspension.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.668-675
• /
• 2001

Recently, the performance of the commercial PCS(Personal Communication Service) system has been improved to the uppermost limit and ultimately the next generation mobile communication is to be realized by IMT-2000 (International Mobile Communication-2000) to provide multimedia services. Therefore, the new type receiving system is researched actively and one of the most important part in a receiver is direct conversion method. The direct conversion method is suitable for low power consumption, small size, MMIC, and low price, which is to be adopted to the next generation mobile communication systems. In this case, however, several problems occur due to DC-offset. The DC-offset suppresses amplification of the required signal because of the leakage signal of frequency synthesizer in the system. In this thesis, the removing method of DC-offset was considered. There are four removing techniques of DC-offset, which are AC-coupling, large capacitor, DC-feedback loop, and DC-free coding. Among these, the AC-coupling method is the most simplest method and the DC-feedback loop method has the best performance. Then, the performance of the AC-coupling method and DC-feedback loop method are evaluated by HP's ADS simulation tool. As a result, the AC-coupling method cannot be used to the digital communication systems due to data loss. On the other hand, it was confirmed that the DC-feedback loop method is suitable for the direct conversion receiver.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.4
• /
• pp.213-225
• /
• 2007

Flash memory is widely used as a storage device for potable equipments such as digital cameras, MP3 players and cellular phones because of its characteristics such as its large volume and nonvolatile feature, low power consumption, and good performance. However, a block in flash memories should be erased to write because of its hardware characteristic which is called as erase-before-write architecture. The erase operation is much slower than read or write operations. FTL is used to overcome this problem. We compared the performance of the existing FTL algorithms on Windows-based OS. We have developed a tool called FTL APAT in order to gather I/O patterns of the disk and analyze the performance of the FTL algorithms. It is the log buffer scheme with full associative sector translation(FAST) that the performance is best.