• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.1
• /
• pp.70-76
• /
• 2003

For the development of superconducting power apparatus, it is necessary to establish the dielectric technology in coolant like L$N_2$. Therefore in this paper we conducted experiment of surface flashover that could occur in the windings of HTS transformer which will be developed in the pancake coil type. First, we distinguished two types of surface flashover by electrode alignment, such as parallel and vertical, and then compared with each characteristics of surface flashover. The flashover voltage was more affected by thickness of spacer than by surface length when the thickness of spacer is over 1 mm. And the surface flashover with metallic particle attached on the spacer was tested, it was affected by the particle position. The more close to the electrodes, the worse the characteristics. Also the experiment was conducted when the electrode was immersed in liquid nitrogen(L$N_2$) partially. The surface flashover characteristics of spacer was, when immersed partially in 50%, rapidly decreased.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.1
• /
• pp.131-137
• /
• 2014

A 120 GHz voltage controlled oscillator (VCO) with a divider chain including an injection locked frequency divider (ILFD) and six static frequency dividers is demonstrated using 65-nm CMOS technology. The VCO is designed based on the LC cross-coupled push-push structure and operates around 120 GHz. The 60 GHz ILFD at the first stage of the frequency divider chain is based on a similar topology as the core of the VCO to ensure the frequency alignment between the two circuit blocks. The static divider chain is composed of D-flip flops, providing a 64 division ratio. The entire circuit consumes a DC power of 68.5 mW with the chip size of $1385{\times}835{\mu}m^2$.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1315-1323
• /
• 2014

Although the power density in Double Stator Switched Reluctance Motor (DSSRM) has been improved, the torque ripple is still very high. So, it is important to reduce the torque ripple for specific applications such as Electric Vehicles (EVs). In This paper, an effective rotor shaping optimization technique for torque ripple reduction of DSSRM is presented. This method leads to the lower torque pulsation without significant reduction in the average torque. The method is based on shape optimization of the rotor using Finite Element Method and Taguchi's optimization method for rotor reshaping for redistribution of the flux so that the phase inductance profile has smoother variation as the rotor poles move into alignment with excited stator poles. To check on new design robustness, mechanical analysis was used to evaluate structural conformity against local electromagnetic forces which cause vibration and deformation. The results show that this shape optimization technique has profound effect on the torque ripple reduction.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.441-448
• /
• 2013

This paper describes the development of Target Simulator developed for performance test and failure detection of Imaging Infra-Red(IIR) seeker which is one of the most important equipments in specific cruise missile systems. The simulator makes it possible to test detecting and tracking performance for target, uniformity of IIR, FOV status and spatial resolving power. Besides, it includes several self-test functions and optic axis alignment methods to improve its own reliability.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.4
• /
• pp.202-206
• /
• 2018

Permalloy($Ni_{80}-Fe_{20}$) which is known for its soft magnetic properties is a well-known material that has been studied intensively. Permalloy nanoflakes were fabricated with the combination of electrodeposition and sonication process. Ultrasonic power was applied to the deposited alloy which produced nanoflakes in forms of sheet. High internal stress created cracks which helped the peeling of permalloy into nanosheets. Because of shape anisotropy, flakes could be aligned by magnetic field. The magnetic properties of the nanosheets were observed, and the variation of magnetic properties with the alignment of flake was also investigated.

• Corrosion Science and Technology
• /
• v.17 no.6
• /
• pp.265-271
• /
• 2018

CRUD specimens, scraped from twice-burned fuel cladding in the Korean Nuclear Power Plant, were analyzed using Shielded-EPMA. The principal elements of the CRUD were identified as Ni and Fe, at an approximate ratio of 1.3 Ni/Fe. To investigate the morphology and composition of the pure metallic materials in the CRUD, coolant impurities must be removed. This can be accomplished by increasing the EPMA current to an abnormally high intensity until the impurities are melted. Normally, EPMA applications are performed at conditions of 20 kV voltage and 20 nA current. But in our study, the applied current was increased up to 1200 nA, over time increments ranging from 5 to 30 seconds. This technique was performed by opening an adjustable aperture for the gun alignment. Results showed impurities contained in the CRUD material disappeared and pure metal materials, e.g., Ni and Fe, remained. This method presents an innovative way to analyze CRUD.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.6
• /
• pp.15-21
• /
• 2010

In the recent years, various researches about the signal processing have been presented to improve the performance of power analysis. Among these signal processing techniques, the research about the signal compression is not enough than a signal alignment and a noise reduction; even though that can reduce considerably the computation time for the power analysis. But, the existing compression method can sometimes reduce the performance of the power analysis because those are the unsophisticated method not considering the characteristic of the signal. In this paper, we propose the new PCA (principal component analysis)-based signal compression method, which can block the loss of the meaningful factor of the original signal as much as possible, considering the characteristic of the signal. Also, we prove the performance of our method by carrying out the experiment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.61-69
• /
• 2017

The study on interference channel is very important information theoretically and many studies have been done on it. However, even in the simplest case, even in the case of two user interfering channels, the channel capacity is not yet known except in special cases. Recently, research on the multiplexing gain that shows the tendency of the transmission rate in the high signal to noise ratio (SNR) band has been actively carried out, instead of accurately grasping the channel capacity. Obtaining optimal multiplexing gain can reveal trends in channel capacity at high signal-to-noise ratio bands. In an interfering channel with two users, the best multiplexing gain can be obtained by eliminating the interference. However, recent research shows that when the number of users is more than three, the optimal multiplexing gain can not be obtained only by zero forcing and a new technique called interference sorting is needed. There are two types of interference sorting techniques. Beamforming A method of effectively separating signals and interference by properly selecting matrices and constructing structured codes using rational numbers and irrational numbers. The interference alignment technique can achieve optimal multiplexing gain in various environments such as interference channel, X channel, compound broadcast channel, and multi hop network for multi source multi destination. In recent years, it has also been applied to distributed storage. Lee et al., "Lattice Code Interference Alignment in Cooperative Multipoint Transmission (COMP) for Interference Channels of Three Users", Journal of the Institute of Electronics Engineers, vol.49-TC,no.6,2012. In this paper, the DoF of delayed channel information is obtained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1785-1796
• /
• 2015

In this paper, we investigate achieving the full diversity order and power gains in case of using OSTBCs and quasi-OSBCs in the x channel system with interference alignment with more than 2 antennas at each terminal. A slight degradation is remarked in the case of quasi-OSTBCs. In terms of receiver structure, we show that due to the favorable structure of the channel matrices, the simple zero-forcing receiver achieves the full diversity order, while the interference cancellation receiver leads to degradations in performance. As compared to the conventional scheme, simulation results demonstrate that our proposed schemes achieve 14dB and 16.5dB of gain at a target bit error rate (BER) of 10^-4 in the case of OSTBCs with 3 and 4 antennas at each terminal, respectively, while achieving the same spectral efficiency. Also, a gain of 10dB is achieved at the same target BER in the case of quasi-OSTBC with 4 antennas at each terminal.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.3
• /
• pp.16-20
• /
• 2018

Steel Fiber reinforced self-compacting concrete (SFRSCC) has been widely used in a number of structures, such as ordinary civil infrastructures, sky scrapers, nuclear power plants, hospitals, dams, channels and etc. Thanks to its short and discrete reinforcing fibers, its performance, including tensile strength, ductility, toughness and flexural strength gets much better in comparison with ordinary self-compacting concrete (SCC) without any reinforcing fibers. Despite all these aforementioned advantages of SFRSCC, its performance highly depends on fiber's orientation. In case of short discrete fibers, the orientation of fibers is completely random and cannot be controlled during pumping process. If fibers distribution inside hardened state concrete are randomly distributed, it leads to less resistance potential of concrete element, especially in terms of flexural and tensile strength. The maximum expected strength may not be achieved. Therefore, fiber alignment has been considered as one of the important factors in SFRSCC. To address this issue, this study investigates the effects of concrete matrix's density and inlet velocity on fiber alignment during the pumping process using a finite element method.