• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.173-176
• /
• 2006

There are many kinds of protection methods for marine structures by using and environmental condition. Coating protection method, one of these methods is being widely adopted to both all ground and marine structures. In this study, by adding some additives such as Zn powder(Zn), carbon black(CB) to epoxy anti-corrosive paint, the effect to promote corrosion resistance was investigated with electrochemical method. Corrosion potentials with additives shifted to negative direction than no additive. However passivity current density increased than no additive except for Zn(20)+CB(10), especially, additive of Zn(20)+CB(10) showed the smallest passivity current density. Polarization resistance of Zn(20)+CB(10) by both cyclic voltammogram and impedance measurement was the largest value than other additives. And also surface phenomenon by adding Zn(20)+CB(10) was observed a good add condition not showing bubbling than other additives.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.78-83
• /
• 2012

In this study, some experimental results of the peroxide-degradation process of polypropylene(PP) in a co-rotating twin-screw extruder to produce controlled rheology polypropylene(CRPP) are presented. The peroxide was dicumyl peroxide(DCP) and the concentration of DCP was in the range 0-0.3 wt%. It was found that the rheological properties of PP change significantly during reactive extrusion. Melt flow index(MFI) increased with DCP concentration. Intrinsic viscosity decreases with increasing DCP concentration. From dynamic rheological data, number average molecular weight(Mn), weight average molecular weight(Mn) and molecular weight distribution(MWD) were calculated. Results indicated that Mw decreases and MWD becomes narrower with increasing peroxide concentration. Especially, particle size distribution of CRPP decreases with increasing DCP concentration by chemical powdering process, and anti-slip floor paint, CRPP(DCP 0.2 wt%) powder by 10phr was friction coefficient 2.15 ${\mu}$, abrasion resistance 511.18%.

• 분석과학
• /
• 제24권1호
• /
• pp.45-50
• /
• 2011

현장조사 시 증거물을 찾는 방법은 육안관찰과 과학수사장비를 활용하게 된다. 감정에 활용되고 있는 현장 증거물은 혈액, 정액, 타액, 모발, 지문, 섬유, 토양, 페인트 등 그 종류는 매우 다양하며 그 중 지문은 현장 감식을 통하여 직접 현출하여 신속하게 개인을 식별 할 수 있다. 본 연구에서는 일상에서 많이 접할 수 있으면서도 선택적 현출 방법이 필요한 가죽류 지갑, 혁대, 쇼파 등에 대하여 다양한 현출 방법을 이용 검토 한 결과 다양한 가죽의 현출방법으로 자석형광분말법 및 형광분말법을 이용한 잠재지문 현출방법이 효율적인 것으로 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.681-684
• /
• 2005

The old technique of sandblasting which has been used for paint or scale removing, deburring, and glass decorating has recently been developed into a powder blasting technique for brittle materials, capable of producing micro structures larger than 100um. A large number of Investigations on the abrasive jet machining with output parameters as material removal rate, penetrate and surface finish have been carried out and reported by various authors. In this paper, we investigated the effect of surface characteristics and surface shape of the abrasive jet machined glass surface under different blasting parameter. and finally we established a model for abrasive flow machining process, and compared with experimental results.

• Corrosion Science and Technology
• /
• 제17권6호
• /
• pp.257-264
• /
• 2018

Anti-graffiti coatings have become more important. These layers must guarantee excellent corrosion protection properties, and graffiti must be easily removable, without reducing protection and aesthetic properties. In this study, anti-graffiti and corrosion behavior of two anti-graffiti polyurethane powder coatings were studied. These layers were deposited on aluminum substrate, with two different surface finishes, smooth, and wrinkled. The action of four different removers are investigated. Graffiti were drawn on coatings by means of red acrylic spray paint. Methyl-ethyl-ketone (MEK) and a "commercial" remover were the most effective solvents, in terms of graffiti removal capability, producing limited change in aesthetical surface aspect for smooth finishing. The wrinkled surface was less resistant. Corrosion protection properties, after removal action and contact with the remover, were evaluate by electrochemical impedance spectroscopy. After approximately 5 hours, coatings were no longer protective due to formation of defects. To simulate the weathering effect, UV-B cyclic test (4 hours of UV exposure followed by 4 hours of saturated humidity at $50^{\circ}C$) were performed for 2000 hours. Gloss and color changes were measured, and electrochemical impedance spectroscopy measurements were performed after aging and graffiti removal.

• 문화기술의 융합
• /
• 제8권6호
• /
• pp.661-666
• /
• 2022

이 연구는 내용연수에 따른 분말소화기 저장용기의 부식정도와 소화성능 변화를 고찰하여 상시 적정 성능을 확보하기 위해 시장지역, 공장지역, 공동주택지역을 대상으로 실험을 실시하여 다음과 같은 결론을 도출하였다. 첫째, 외부접촉 저장용기 부식 정도에 대한 실험값이 2012년 공동주택지역에서 부적합으로 나타났다. 둘째, 소화기 내구연한은 10년이나 1회에 한하여 샘플검사에 통과하면 길게는 13년을 사용하게 되지만, 사실상 소화기 수명은 배치장소의 주위환경 과 내용연수에 따라 차이가 크게 다르게 나타나는 것으로 분석되었다. 마지막으로 소화기 배치장소의 환경이 취약한 경우에는 더욱 빠르나, 통상적인 관리하에서 소화기의 내용연수 7~8년부터 소화기 저장용기의 부식이 일어나기 시작하므로 소화기의 내용연수를 5년 정도로 줄이는 것이 타당하다고 판단된다.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.32-37
• /
• 2008

광개시제 함량이 0.5 wt%, 1 wt%, 2 wt%인 UV 경화형 분체도료를 배합하고 낮은 온도에서도 용융되는 수지를 선택하여 열민감성 기재에 적용이 가능함을 알아보았다. 열민감성 기재로는 PVC와 목재제품(MDF, 합판 등)을 선택하여 표면경도, 광택, 부착력을 통해서 기재와의 상관관계를 알아보았다. 광개시제 양이 증가할수록 가교밀도가 증가하여 도막이 brittle해지는 경향을 보였고, 그에 따라 부착력이 감소하였다. 열민감성 기재에 적용한 결과, 표면경도는 기재에 영향을 받지 않았지만 광택은 기재에 따라서 차이가 나타났다. 그리고 UV 경화형 분체도료의 부착력은 열민감성 기재에 적용하기에 충분하였다. 본 연구 결과, UV 경화형 분체도료에서 광개시제 함량이 중요한 인자이며 열민감성 기재에 적용이 가능함을 확인하였다.

• 한국자기학회지
• /
• 제6권4호
• /
• pp.251-257
• /
• 1996

기존의 침상형 매체와는 다르게 자기기록용 치환형 Ba-ferrite(BaM) tape의 보자력은 입자특성, 치환이온의 종류 및 tape 제조조건에 따라 분말의 보자력보다 50 Oe에서 600 Oe로 높게 나타났다. 이 보자력 증가는 육각판상 입자간 stacking 효과와 분말표면에 유기용제 흡착효과에 기인하였다. 동일한 입자크기와 판상비를 갖지만 치환이온이 다른 BaM 분말을 사용한 수평배향된 tape의 경우 입자간 stacking 효과에 의한 보자력 증가는 100 Oe에서 120 Oe 사이로 일정하여 치환이온의 종류에 무관하였다. 치환형 BaM 분말표면에 유기용제 흡착은 활성화 흡착과정에 의해 이루어졌으며, 유기용제 흡착에 의한 보자력 증가는 Co 이온이 함유된 BaM tape에서만 나타났다. Co-Ti 치환된 BaM의 경우 tape 제조시 사용된 유기용제 MEK(methyl ethyl ketone), TOL(toluene) 및 CHO (cyclohexanone) 중에서 CHO가 보자력 증가에 가장 크게 기여하였다.

• 한국세라믹학회지
• /
• 제53권2호
• /
• pp.222-226
• /
• 2016

The synthesis of pure calcium carbonate nanocrystals was achieved using a simultaneous injection method to produce nano particles of uniform size. These were characterized using scanning electron microscopy and powder X-ray diffraction. The nano particles were needle-shaped aragonite polymorphs, approximately 100-200 nm in length. The aragonite polymorph of calcium carbonate was prepared using aqueous solutions of $CaCl_2$ and $Na_2CO_3$, which were injected simultaneously into double distilled water at $50^{\circ}C$ and then allowed to react for 1.5 h. The resulting whisker-type nano aragonite with high aspect ratio (30) is biocompatible and potentially suitable for applications in light weight plastics, as well as in the medical, pharmaceutical, cosmetic and paint industries.

• 한국식품영양학회지
• /
• 제32권1호
• /
• pp.41-49
• /
• 2019

Carotene, xanthophyll, carotenoid anthocyan, phycopyrine, chlorophyll, and monascus pigments are used as natural coloring agents since they are more stable to human body than synthetic coloring agents. Among them, monascus pigments are a natural red pigment produced by the Monascus purpureus. For the development of edible paint using natural pigment, Monascus purpureus strain was cultured at a temperature of $35^{\circ}C$ for 15 days on a PDYA plate and liquid medium to produce a red pigment. In addition, a large amount of the red pigment was extracted from Hongkuk Koji in parallel with water extraction and ultrasonic wave extraction. At this time, the yield of ultrasonic extract was 2~4 times higher. Thus, Monascus purpureus strains, etc. were prepared by freeze-drying powder. In conclusion, natural paints made with red pigments have enabled the development of been edible paints that can be used as eco-friendly materials with good viscosity, enhanced spread ability and coloration.