• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.610.1-610.1
• /
• 2006

• Journal of the Korean Ceramic Society
• /
• v.22 no.5
• /
• pp.9-16
• /
• 1985

Agglomeration of Y-PSZ and its related properties were studied. The ultrafine $ZrO_2$ powder containg 3 mol% $Y_2O_3$ was prepared by 1) coprecipitation method b) hot petroleum drying method c) sol-gel method and the characteristics of calcined powders and the microstructures of sintered body were observed. Powder prepared by the coprecipitation method was about 125$\AA$ in crystallite size and 0.1~1.0${\mu}{\textrm}{m}$ of intra-agglomerate pore size when calcined at $600^{\circ}C$ for 1 hour. because of small crystallite size and weak agglo merate strength resultant densification of sintered body was high. But above the temperature of 130$0^{\circ}C$ efflorescent phenomena due to anions attached to powder surface was observed. Powder prepared by hot petroleum drying method was 65$\AA$ in crystallite size and 1~10${\mu}{\textrm}{m}$ of intraagglome-rate pore size and it was observed that the agglemerates were formed during the calcining process. In this case despite of small crystallite size the rate of sintering was slow and the existing lenticular interagglomerate pore was not eliminated to the final stage of sintering. Powder prepared by sol-gel method showed solid agglomertes due to rapi dhydrolysis reaction. In this powder which involves strong solid agglomerates overall sintering rate was determined by the sintering between the agglomerates and therefore sinterability of powders made by sol-gel method was very poor.

• Journal of Powder Materials
• /
• v.9 no.6
• /
• pp.433-440
• /
• 2002

Synthesis and compaction of Al-base nano powders by pulsed discharge method were investigated. The aluminum based powders with 50 to 200 nm of diameter were produced by pulsed wire evaporation method. The powders were covered with very thin oxide layer. The perspective process for the compaction and sintering of nanostructured metal-based materials stable in a wide temperature range can be seen in the densification of nano-sized metal powders with uniformly distributed hard ceramic particles. The promising approach lies in utilization of natural uniform mixtures of metal and ceramic phases, e.g. partially oxidized metal powders as fabricated in our synthesis method. Their particles consist of metal grains coated with oxide films. To construct a metal-matrix material from such powder, it is necessary to destroy the hard oxide coatings of particles during the compaction process. This goal was realized in our experiments with intensive magnetic pulsed compaction of aluminum nanopowders passivated in air.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.470-473
• /
• 2002

In order to get proper original suspension for the electrophoresis process of making YBaCuO films, YBaCuO superconductor powder was prepared with the Sol-gel method. The composition of the powder was analyzed by X-ray diffraction, which was identified as YBa$_2$Cu$_3$O$\sub$7-x/(Yl23) phase. The form of YBaCuO single particle was showed to be spherical by scanning electronic microscope and its size was among 0.2-1 $\mu\textrm{m}$. The critical transition temperature (T$\sub$c/) and the critical current density (J$\sub$c/) were measured with the four-probe, method. The T$\sub$c/ was about 91 K, and the J$\sub$c/ was 5-30 A/$\textrm{cm}^2$.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.124-128
• /
• 2005

Homogeneous and fine powders for Bi-2223 tape were prepared by ultrasonic spray pyrolysis (SP) method from an aqueous solution of metal nitrates. Bi-2223 precursor powders were synthesized with various solutes concentration and pyrolysis temperature. The synthesized precursor powders had a narrow particle size distribution and an average particle size was $\~{\cal}um$. The reactivity of precursor powder by SP method is very high, attributed to the fine and narrow particle size distribution. Bi-2223/Ag tape was prepared using PIT method and followed by various sintering conditions. The precursor powder by SP method promoted a very quick formation of the Bi-2223 phase for short sintering time while the secondary phase such as large AEC phase and $Ca_2PbO_4$ were minimized for SP tapes.

• Journal of the Korean Ceramic Society
• /
• v.28 no.11
• /
• pp.843-850
• /
• 1991

There is a growing demend for absorptive electromagentic shielding materials for wide band frequency application. In this study, the absorber which consists of a rubber plus Ni-Zn ferrite which have been prepared by direct-wet method. A rubber ferrite composite for electromagnetic shielding, it is most importan facter the homogeneous ultra fine size and high dispersitive ferrite powder. Direct-wet method and solid-solid reaction method for preparing of ultra fine ferrite powder was used. It has been experimentally verified that the powder which prepared by direct-wet method was very fine and almost same size spherical powder, the composite ferrite have excellent electromagnetic wave absorption in X-band.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.48-49
• /
• 2002

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.11a
• /
• pp.53-54
• /
• 2002

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.10a
• /
• pp.59-59
• /
• 2003

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.10a
• /
• pp.83-84
• /
• 2003