Journal of Powder Materials (한국분말재료학회지)

The Korean Powder Metallurgy & Materials Institute (한국분말재료학회 (*구 분말야금학회))
권호 표지
DOI QR코드

DOI QR Code

Synthesis and Compaction of Al-based Nanopowders by Pulsed Discharge Method

  • Published : 2002.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

Synthesis and compaction of Al-base nano powders by pulsed discharge method were investigated. The aluminum based powders with 50 to 200 nm of diameter were produced by pulsed wire evaporation method. The powders were covered with very thin oxide layer. The perspective process for the compaction and sintering of nanostructured metal-based materials stable in a wide temperature range can be seen in the densification of nano-sized metal powders with uniformly distributed hard ceramic particles. The promising approach lies in utilization of natural uniform mixtures of metal and ceramic phases, e.g. partially oxidized metal powders as fabricated in our synthesis method. Their particles consist of metal grains coated with oxide films. To construct a metal-matrix material from such powder, it is necessary to destroy the hard oxide coatings of particles during the compaction process. This goal was realized in our experiments with intensive magnetic pulsed compaction of aluminum nanopowders passivated in air.

Keywords

References

  1. J. Mater. Res. v.3 L. Ting;R. Gronskey https://doi.org/10.1557/JMR.1988.1367
  2. J. Am. Ceram. Soc. v.80 T. Jukui;T. Oobuchi;Y. Ikuhara;S. Ohara;K. Kodera https://doi.org/10.1111/j.1151-2916.1997.tb02822.x
  3. J. Appl. Phys. v.67 H. Hahn;R. S. Averback https://doi.org/10.1063/1.345798
  4. Nanostruc. Mater. v.6 V. Ivanov;Y. A. Kotov;O. H. Samatov;B. Bohme;H. U. Karow;G. Schumacher https://doi.org/10.1016/0965-9773(95)00054-2
  5. Fisika I chimia obrabotki materialov v.4 Y. A. Kotov;A. Yavorovsky
  6. Powder Metall. v.43 F. Tepper
  7. Key Egn. Mater. v.132-136 Y. A. Kotov;E. I. Azarkevich;I. V. Beketov;T. M. Demina;A. M. Muzarkaev;O. M. Samatov
  8. Seriya atomnoye materialovedeniye v.1 G. P. Glazunov
  9. J. Am. Ceram. Soc. v.77 W. Chen;A. Pechenik;S. J. Dapkunas;G. J. Piermarini;S. G. Malghan https://doi.org/10.1111/j.1151-2916.1994.tb07259.x
  10. J. Am. Ceram. Soc. v.75 A. Pechenik;G. J. Piermarini;S. C. Danforth https://doi.org/10.1111/j.1151-2916.1992.tb04422.x
  11. Metall. Mater. Trans. B v.28B Ogino Y.;Yamasaki T.;Long Shen B.
  12. Metallurgia Roman I.V.;Gorobtsov V.G.;I.V. Roman(Eds.);V.S. Arunachalam(Eds.)
  13. Fizika I Khimmiya and Obrabotki Materialov v.4 Yu A. Kotov;N. A. Yavorovskii
  14. Instruments and Experimental Technique v.40 A. A. Nozdrin;V. V. Ivanov;A. N. Vikhrev
  15. 4th Eur. Ceram. Soc. Conf. Proc. Italy I. B. Beketov;Y. A. Kotov;A. M. Murzakaev;O. M. Samatov;V. P. Volkov;R. Bohme;G. Schumacher
  16. Mater. Sci. Forum v.225-227 I. B. Beketov;Y. A. Kotov;A. M. Murzakaev;O. M. Samatov;V. P. Volkov;R. Bohme;G. Schumacher https://doi.org/10.4028/www.scientific.net/MSF.225-227.913
  17. J. Eur. Ceram. Soc. v.18 J. C. Sanchez-Lopez;A. Caballero;A. Fermandez
  18. Nanostruct. Mater. v.9 Apte P.;Suits B. H.;Siegel R. W. https://doi.org/10.1016/S0965-9773(97)00110-4

Cited by

  1. Generation and characterization of nano aluminium powder obtained through wire explosion process vol.30, pp.2, 2007, https://doi.org/10.1007/s12034-007-0034-5
  2. Synthesis and characterization of copper nanoparticles by using the exploding wire method vol.61, pp.5, 2012, https://doi.org/10.3938/jkps.61.710
  3. Investigation of Nano-Molybdenum Carbide Particle Produced by Wire-Explosion Process vol.43, pp.10, 2015, https://doi.org/10.1109/TPS.2015.2426019
  4. Thermodynamic modeling and characterizations of Al nanoparticles produced by electrical wire explosion process vol.32, pp.04, 2017, https://doi.org/10.1557/jmr.2016.507
  5. Understanding nanoparticle formation by a wire explosion process through experimental and modelling studies vol.19, pp.2, 2007, https://doi.org/10.1088/0957-4484/19/02/025703