• 한국식품과학회지
• /
• 제36권6호
• /
• pp.885-892
• /
• 2004

본 실험에서는 성장기용 조제식에 함유된 유지를 대상으로 전위차 적정법 및 뷰렛 적정법에 의한 과산화물가를 측정하고 그 측정불확도를 비교하여 산정하였다. GUM(Guide to the expression of uncertainty in measurement) 및 Draft EURACHEM/CITAC Guide의 이론에 기초하여 측정불확도를 구하였으며, 불확도 인자로서 적정액의 농도, 시료량 및 적정량 등이 작용하였다. 뷰렛적정에 의한 과산화물가 측정값과 확장불확도는 $2.05{\pm}0.17\;meq/kg$ 으로 표현되었으며, 전위차적정에 의한 경우는 $1.96{\pm}0.07\;meq/kg$ 으로 표현되었다. 적정과정에서의 측정불확도가 전체불확도의 대부분을 차지하였으며, 전위차적정법에 의한 측정불확도는 뷰렛적정법에 의한 경우보다 낮게 나타나 과산화물가가 낮은 시료의 측정시에 바람직한 측정방법으로 사료되었다.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1392-1397
• /
• 2018

The potentiometric measurement result for a high resistance up to $100P{\Omega}$ using a low resistance, a low voltage source and a commercial digital multimeter(DMM) is presented. With the method, a resistance can be easily, fast and economically measured. Using the method, resistance ranges over the $10G{\Omega}$ range which is difficult to measure using a commercial DMM and resistance ranges between $100T{\Omega}$ and $100P{\Omega}$ which cannot measure using an insulation tester were measured within accuracy of a few percent. It is expected that it can be useful to determine the temperature and voltage effect of a high resistance and an insulation material because it uses a reference resistance with a low resistance, very low temperature and voltage effect. Besides, it is expected that it can be useful to calibrate a dc high voltage divider with a large resistance ratio and a very low resistance because arbitrary resistance ratio measurements are possible with it.

• 센서학회지
• /
• 제16권6호
• /
• pp.434-440
• /
• 2007

Two kinds of new NOx sensing mechanism was proposed and examined. One of those was potentiomtric sensor based on the measurement of decomposed oxygen from NO using YSZ porous diffusion barrier and Pd catalytic electrode. The sensor based on decomposed oxygen measurement responded to the range of 300 - 1000 ppm NO in $N_{2}$ environment and the sensitivities were coincident with theoretical values at 700 and $800^{\circ}C$ but the decomposition rate depended on gas flow rate. The other sensor was equilibrium potentiometric type using $Gd_{2}O_{3}$-nitrates solid solution as sensing material. The sensor using $Gd_{2}O_{3}$-nitrates solid solution was suitable for NOxxsensing at $700^{\circ}C$ in 5 % oxygen and the sensitivity was 19.3 mV/decade. However, long term stability of the sensing material at high temperature was not sufficient.

• Journal of Magnetics
• /
• 제10권2호
• /
• pp.66-70
• /
• 2005

The junction properties between the ferromagnet (FM) and two-dimensional electron gas (2DEG) system are crucial to develop spin electronic devices. Two types of 2DEG layer, InAs and GaAs channel heterostructures, are fabricated to compare the junction properties of the two systems. InAs-based 2DEG layer with low trans-mission barrier contacts FM and shows ohmic behavior. GaAs-based 2DEG layer with $Al_2O_3$ tunneling layer is also prepared. During heat treatment at the furnace, arsenic gas was evaporated and top AlAs layer was converted to aluminum oxide layer. This new method of forming spin injection barrier on 2DEG system is very efficient to obtain tunneling behavior. In the potentiometric measurement, spin-orbit coupling of 2DEG layer is observed in the interface between FM and InAs channel 2DEG layers, which proves the efficient junction property of spin injection barrier.

• Journal of Biosystems Engineering
• /
• 제28권4호
• /
• pp.335-342
• /
• 2003

A simple disposable thick-film potentiometric strip has been developed and evaluated for hydroponics application. The strip consisted of low ion-selective electrodes (ISE) fabricated by screen-printing technology. The electrochemical responses of ion sensors for nitrate, ammonium, potassium, and magnesium were measured with specially designed 16-channel low voltage signal transducers. The analytical characteristics of the sensors were comparable with those of conventional ISE sensors. The thick-film sensors exhibit linear relationships over five concentration decades. The concentration of N $O_3$ - ion in standard solution can be determined by direct potentiometric measurements without any conditioning before measurements. However, measurement of $K^{+}$, N $H_4$$^{+}$, and $Mg^{2+}$ ionic concentrations in nutrient solutions seems not feasible.

• 한국토양비료학회지
• /
• 제26권3호
• /
• pp.160-171
• /
• 1993

Ultisol(필리핀의 Luisiana 토양)과 Alfisol(필리핀의 Maahas 토양)및 Inceptisol(한국의 용지통) 토양의 표면전하 특성을 전위차 측정법과 역적정법 및 이온흡착법 등의 세가지 방법으로 정량하였고 분석법간의 차이를 비교한 결과는 아래와 같다. 1. 이온흡착법(또는 CEC-AEC method)으로 구한 PZNC(point of zero net charge)값은 Luisiana토양과 Maahas 토양 및 용지통에서 각각 3.1, 2.2 및 2.9였다. 따라서 이들 토양의 자연 pH조건에서는 음전하를 보였다. 2. 전위차 적정법과 역적정법에서 구한 PZSE(point of zero salt effect)값은 Maahas토양 외의 두 토양에서 일치하였다. 3. PZNC값은 PZSE값에 비해 모든 토양에서 낮았는데 이는 영구음전하의 영향으로 생각되었다. 한편 Uehara and gillman(1980)의 이론에 의해 구한 영구음전하는 Luisiana 토양과 Maahas 토양 및 용지통에서 각각 2.6, 4.5 및 0.4me/100g로 pH 7에서 측정된 CEC중 상당히 적은 부분을 차지하였다. 4. 역적정법은 pH가 너무 높거나 낮을 때 전위차 적정법이 표면전하를 과다 평가하는 결점을 보완해 주었으나 여전히 이온흡착법에 비해 과대 평가하고 있어 영구전하의 영향이 큰 보통 토양에서는 이온흡착법의 사용이 나을 것으로 판단되었다.

• 대한화학회지
• /
• 제14권1호
• /
• pp.13-18
• /
• 1970

非水溶液 Ethylenediamine 中에서 水銀電極의 標準電位 및 水銀鹽化物, $HgCl_2,\;HgBr_2,\;HgI_2$의 Ion-Pair 形成恒數를, Hg電極/$HgX_2$ 또는 $HgX_2$+NaX//亞鉛아마르감 參照電極과 같은 Cell의 構成으로서 電位差法에 依하여 測定하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.152.2-152.2
• /
• 2008

• 센서학회지
• /
• 제33권2호
• /
• pp.63-69
• /
• 2024

A novel method for measuring hydrogen concentration is introduced, along with its working principle and a novel detection algorithm. This configuration requires no additional reference compartment for potentiometric electrochemical measurements; therefore, it is the most suitable for measuring dissolved hydrogen in the liquid phase. The sensor's electromotive force saturates at a certain point, depending on the hydrogen concentration during the heating process of the sensor operation. This dynamic temperature scanning method provides higher sensitivity than the constant temperature measurement method.

• Preventive Nutrition and Food Science
• /
• 제4권1호
• /
• pp.79-83
• /
• 1999

A potentiometric biosensor employing a CO3-2 ion-selective electrode(ISE) and malic enzyme immobilization in al flow injection analysis (FIA) system was constructed. Analytical parameters were optimized for L-malate determination . The CO3-2 -ISE-FIA system was composed of a pump, an injector, a malic enzyme (EC1.1.1.40) reactor, a CO3-2 ion-selective electrode, a pH/mV meter and a recorder. Cofactor NADP was also injected with substrate for theenzyme reaction into the system. Optimized analytical parameters for L-malate determination in the CO3-2 ISE-FIA system were as follows ; flow rate, 14.5ml/hr ; sample injection volume, 100ul; enzyme loading in the reactor, 20 units ; length of the enzyme reactor , 7 cm ; tubing length form the enzyme reactor to the detector as a geometric factor in FIA, 15 cm . The response time for measuring the entire L-malate concentration range (10-2 ~10-5 mol/L ; 4 injections )was <15minutes . In this CO3-2 -ISE-FIA system, the potential differences due to th eformation of CO3-2 by the reaction of malic enzyme on L-malate were correlated to L-malate concentration in the range of 10-2 ~10-5mol/L ; the detection limit was 10-5 mol/L. This potentionmetric CO3-2 ISE--FIA system was found to be useful for L-malate measurement.