• Title/Summary/Keyword: potential evaporation

Search Result 178, Processing Time 0.027 seconds

Climate Change and Soil-Water Balance

  • Aydin, Mehmet;Yano, Tomohisa;Haraguchi, Tomokazu;Evrendilek, Fatih;Jung, Yeong-Sang
    • Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
    • /
    • 2011.11a
    • /
    • pp.7-10
    • /
    • 2011
  • The semi-arid and arid regions comprise almost 40 percent of the world's land surface. The low and erratic precipitation pattern is the single most significant contributor for limiting crop production in such regions where rainfall is the source for surface, soil and ground water. In a changing climate, the semi-arid and arid regions would increasingly face the challenge of water scarcity. According to the relevant literature; under the assumption of a doubling of the current atmospheric CO2 concentration, irrigation demand was estimated to increase for wheat and to decrease for second crop maize in a Mediterranean environment of Turkey in the 2070s. Crop evapotranspiration would decrease due to stomata closure. Reference evapotranspiration and potential soil evaporation were projected to increase by 8.0 and 7.3%, respectively, whereas actual soil evaporation was predicted to decrease by 16.5%. Drainage losses below 90 cm soil depth were found to decrease mainly due to lesser rainfall amount in the future.

  • PDF

A Study on the Development of a Simulation Model for Predicting Soil Moisture Content and Scheduling Irrigation (토양수분함량 예측 및 계획관개 모의 모형 개발에 관한 연구(I))

  • 김철회;고재군
    • Magazine of the Korean Society of Agricultural Engineers
    • /
    • v.19 no.1
    • /
    • pp.4279-4295
    • /
    • 1977
  • Two types of model were established in order to product the soil moisture content by which information on irrigation could be obtained. Model-I was to represent the soil moisture depletion and was established based on the concept of water balance in a given soil profile. Model-II was a mathematical model derived from the analysis of soil moisture variation curves which were drawn from the observed data. In establishing the Model-I, the method and procedure to estimate parameters for the determination of the variables such as evapotranspirations, effective rainfalls, and drainage amounts were discussed. Empirical equations representing soil moisture variation curves were derived from the observed data as the Model-II. The procedure for forecasting timing and amounts of irrigation under the given soil moisture content was discussed. The established models were checked by comparing the observed data with those predicted by the model. Obtained results are summarized as follows: 1. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as the equation(2). 2. Among the various empirical formulae for potential evapotranspiration (Etp), Penman's formula was best fit to the data observed with the evaporation pans and tanks in Suweon area. High degree of positive correlation between Penman's predicted data and observed data with a large evaporation pan was confirmed. and the regression enquation was Y=0.7436X+17.2918, where Y represents evaporation rate from large evaporation pan, in mm/10days, and X represents potential evapotranspiration rate estimated by use of Penman's formula. 3. Evapotranspiration, Et, could be estimated from the potential evapotranspiration, Etp, by introducing the consumptive use coefficient, Kc, which was repre sensed by the following relationship: Kc=Kco$.$Ka+Ks‥‥‥(Eq. 6) where Kco : crop coefficient Ka : coefficient depending on the soil moisture content Ks : correction coefficient a. Crop coefficient. Kco. Crop coefficients of barley, bean, and wheat for each growth stage were found to be dependent on the crop. b. Coefficient depending on the soil moisture content, Ka. The values of Ka for clay loam, sandy loam, and loamy sand revealed a similar tendency to those of Pierce type. c. Correction coefficent, Ks. Following relationships were established to estimate Ks values: Ks=Kc-Kco$.$Ka, where Ks=0 if Kc,=Kco$.$K0$\geq$1.0, otherwise Ks=1-Kco$.$Ka 4. Effective rainfall, Re, was estimated by using following relationships : Re=D, if R-D$\geq$0, otherwise, Re=R 5. The difference between rainfall, R, and the soil moisture depletion D, was taken as drainage amount, Wd. {{{{D= SUM from { {i }=1} to n (Et-Re-I+Wd)}}}} if Wd=0, otherwise, {{{{D= SUM from { {i }=tf} to n (Et-Re-I+Wd)}}}} where tf=2∼3 days. 6. The curves and their corresponding empirical equations for the variation of soil moisture depending on the soil types, soil depths are shown on Fig. 8 (a,b.c,d). The general mathematical model on soil moisture variation depending on seasons, weather, and soil types were as follow: {{{{SMC= SUM ( { C}_{i }Exp( { - lambda }_{i } { t}_{i } )+ { Re}_{i } - { Excess}_{i } )}}}} where SMC : soil moisture content C : constant depending on an initial soil moisture content $\lambda$ : constant depending on season t : time Re : effective rainfall Excess : drainage and excess soil moisture other than drainage. The values of $\lambda$ are shown on Table 1. 7. The timing and amount of irrigation could be predicted by the equation (9-a) and (9-b,c), respectively. 8. Under the given conditions, the model for scheduling irrigation was completed. Fig. 9 show computer flow charts of the model. a. To estimate a potential evapotranspiration, Penman's equation was used if a complete observed meteorological data were available, and Jensen-Haise's equation was used if a forecasted meteorological data were available, However none of the observed or forecasted data were available, the equation (15) was used. b. As an input time data, a crop carlender was used, which was made based on the time when the growth stage of the crop shows it's maximum effective leaf coverage. 9. For the purpose of validation of the models, observed data of soil moiture content under various conditions from May, 1975 to July, 1975 were compared to the data predicted by Model-I and Model-II. Model-I shows the relative error of 4.6 to 14.3 percent which is an acceptable range of error in view of engineering purpose. Model-II shows 3 to 16.7 percent of relative error which is a little larger than the one from the Model-I. 10. Comparing two models, the followings are concluded: Model-I established on the theoretical background can predict with a satisfiable reliability far practical use provided that forecasted meteorological data are available. On the other hand, Model-II was superior to Model-I in it's simplicity, but it needs long period and wide scope of observed data to predict acceptable soil moisture content. Further studies are needed on the Model-II to make it acceptable in practical use.

  • PDF

Study of Space Charge of Metal/copper(Ⅱ)-phthalocyanine Interface (금속/copper(Ⅱ)-phthalocyanine 계면에서의 Space Charge 연구)

  • Park, Mie-Hwa;Yoo, Hyun-Jun;Yoo, HyungKun;Na, Seunguk;Kim, Sonshui;Lee, Kie-Jin
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.18 no.4
    • /
    • pp.350-356
    • /
    • 2005
  • We report the space charge and the surface potential of the interface between metal and copper(Ⅱ)-phthalocyanine(CuPc) thin films by measuring the microwave reflection coefficients S/sub 11/ of thin films using a near-field scanning microwave microscope(NSMM). CuPc thin films were prepared on Au and Al thin films using a thermal evaporation method. Two kinds of CuPc thin films were prepared by different substrate heating conditions; one was deposited on preheated substrate at 150。C and the other was annealed after deposition. The microwave reflection coefficients S/sub 11/ of CuPc thin films were changed by the dependence on grain alignment due to heat treatment conditions and depended on thickness of CuPc thin films. Electrical conductivity of interface between metal and organic CuPc was changed by the space charge of the interface. By comparing reflection coefficient S/sub 11/ we observed the electrical conductivity changes of CuPc thin films by the changes of surface potential and space charge at the interface.

Dynamics of a Bose-Einstein Condensate on Changing Speeds of an Atomchip Trap Potential

  • Kim, Seung Jin;Noh, Jae June;Kim, Min Seok;Lee, Jin Seung;Yu, Hoon;Kim, Jung Bog
    • Journal of the Optical Society of Korea
    • /
    • v.18 no.6
    • /
    • pp.633-638
    • /
    • 2014
  • We report experimental behaviors of condensed $^{87}Rb$ atoms responding to changes in the trap potential of the atomchip. The two-types of adiabatic and non-adiabatic overall changes were implemented by changing the ramp-down speed of the chip-wire current, which can dominantly modify the one-axis magnetic field gradient. Under the adiabatic process, a pure condensate stayed in the initial spin state and collectively oscillated with both monopole and dipole modes, while an atomic cloud above the critical temperature exhibited sound waves in a dense ultracold gas. On the other hand, Bose-Einstein condensate atoms with non-adiabatic perturbation were split into spatially different positions by spin states through spin-flip. We investigated the split ratio among spin states depending on final evaporation frequency. Potential changes, of course, cause collective oscillations regardless of the changing process.

ELECTROCHROMIC BEHAVIOR OF AMORPHOUS NICKELPHTHALOCYANINE THIN FILMS

  • Masui, Masayoshi;Suzuki, Masato;Kaneko, Fujio;Takeuchi, Manabu
    • Journal of the Korean institute of surface engineering
    • /
    • v.29 no.6
    • /
    • pp.735-738
    • /
    • 1996
  • Amorphous nickelphthalocyanine(NiPc) thin films were prepared by vacuum evaporation and their electrochromic behavior and voltammograms were examined in the five kinds of aqueous electrolytes. Amorphous NiPc films were prepared on indium-tin-oxide(ITO) glass substrates cooled to-$120^{\circ}C$ by using liquid nitrogen under a vacuum of $2.4 \times 10^{-4}$. The voltammetric and electrochromic measurements were made using a potential galvanostat. In order to confirm the color change, optical vis-transmission spectra of the NiPc films were measured by a spectrophotometer with various electrode potential applied. The NiPc amorphous thin films exhibited most clearly electrochromism in $KNO_3$ aqueous electrolyte. The specimen films underwent 3 color transitions (from blue to yellow-green, then to red violet, then to dark blue), corresponding to the three peaks on the voltammograms in $KNO_3$ aqueous electrolyte. Blue is color of the as-prepared film. When the potential was swept, charge compensation was attained upon oxidation by injection of anions from the electrolyte and upon reduction by expulsion of anions.

  • PDF

Surface analysis of PET films by XPS and surface potential decay (XPS와 표면전위감소 통한 PET 필름의 표면분석)

  • Lim, K.B.;You, D.H.;Lee, B.J.;Lee, B.S.;Lee, S.H.;Shin, T.H.;Shin, P.K.;Lee, D.C.
    • Proceedings of the KIEE Conference
    • /
    • 2004.07c
    • /
    • pp.1682-1684
    • /
    • 2004
  • In this study, the surface properties of PET film were analyzed after plasma surface treatment. After plasma treatment of surface roughness and XPS were evaluated to analyze the chemical property, while the surface potential decay and surface resistivity was measured to analyze the electrical characteristic. When plasma discharge treatment was conducted for less than 10 minutes, the electrical insulating property was found to be improved through evaporation of low molecular weight materials and cleaning of surface. However, when the treatment was conducted for more than 10 minutes, the insulating property was decreased due to excessive discharge energy. Analysis of chemical characteristics showed that 10-minute treatment resulted in increase of C-O and O=C-O. However, when treated for more than 10 minutes, they were relatively decreased.

  • PDF

Improved Contact Characteristics in a Single Tin-Oxide Nanowire Device by a Selective Reactive Ion Etching (RIE) Process (선택 건식에칭에 의한 단일 산화주석 나노와이어 소자의 접촉 특성 개선)

  • Lee, Jun-Min;Kim, Dae-Il;Ha, Jeong-Sook;Kim, Gyu-Tae
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.59 no.1
    • /
    • pp.130-133
    • /
    • 2010
  • Although many structures based on $SnO_2$ nanowires have been demonstrated, there is a limitation towards practical application due to the unwanted contact potential between the metal electrode and the $SnO_2$ nanowire. This is mostly due to the presence of the native oxide layer that acts as an insulator between the metal contact and the nanowire. In this study the contact properties between Ti/Au contacts and a single $SnO_2$ nanowire was compared to the electrical properties of a contact without the oxide layer. RIE(Reactive Ion Etching) is used to selectively remove the oxide layer from the contact area. The $SnO_2$ nanowires were synthesized by chemical vapor deposition (CVD) and dispersed on a $Si/Si_3N_4$ substrate. The Ti/Au (20nm/100nm) electrodes were formed bye-beam lithography, e-beam evaporation and a lift-off process.

Performance Characteristics Study on an Alternative Refrigerant in Low Temperature Applications (저온용 대체냉매의 성능 특성 연구)

  • SHIN, JEONG-SUB;KIM, MAN-HOE
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.27 no.4
    • /
    • pp.462-469
    • /
    • 2016
  • This paper presents the results of thermodynamic cycle analysis and performance tests of alternative mixtures in low temperature applications. Two near-azeotropic binary mixtures R-152a/R-1270 (35:65 by wt.%) and R-290/E170 (35:65 by wt.%) are considered in this study. They have zero ODP (Ozone Depletion Potential) and much lower GWP (Global Warming Potential) than R-404A which is an alternative of R-502. Refrigeration cycle characteristics such as cooling capacity, coefficient of performance, suction and discharge pressures and temperatures are compared to those for the baseline refrigerants (R-502 and R-404A) cycles. The performance tests are conducted at the evaporation and condensation temperatures of $5^{\circ}C$ and $45^{\circ}C$, subcooling and superheating temperatures of $5^{\circ}C$, respectively. Performance comparisons between baseline and alternative refrigerants are conducted on the same cooling capacity. The system performance of newly proposed refrigerant mixtures show promising results.

Performance Evaluation of an Electrohydrodynamic Spray Nozzle for Regeneration of Particulate Matter on Diesel Particulate Filter (경유차 입자상물질 저감필터(DPF) 재생용 전기수력학적 연료 후분사 노즐의 미립화 특성 평가 및 수치해석을 이용한 액적 입경별 연소 특성 평가)

  • Jeong, Seonghun;Park, Sung-Eun;Kim, Min-Jung;Cho, Hyung-Jei;Hwang, Jungho
    • Particle and aerosol research
    • /
    • v.8 no.2
    • /
    • pp.55-68
    • /
    • 2012
  • Particulate matters (PM) which are collected into a diesel particulate filter (DPF) system have to be periodically removed by thermal oxidation. In this report, we fabricated an electrohydrodynamic-assisted pressure-swirl nozzle to spray diesel droplets finer. Atomization performance of the nozzle was evaluated using both experimental and numerical methods. Two types of nozzle designs, the charge induction type and the charge injection type, were tested. While the former generated diesel droplets of $400\;{\mu}m$ at an applied electric potential over 10 kV, the latter presented the droplets smaller than $23\;{\mu}m$ at an applied electric potential of 8 kV. The numerical simulation results showed that the reduced size of droplets caused higher evaporation of droplets and therefore the increased temperature, which would eventually increase the regeneration performance of the DPF system.

Phagocytic Uptake of Surface modified PLGA Microspheres Using Dendritic Cell

  • Kim, Ji-Seon;Lee, Young-Sung;Lee, Jung-Gil;Park, Jeong-Sook;Lee, Jong-Kil;Chung, Youn-Bok;Han, Kun
    • Journal of Pharmaceutical Investigation
    • /
    • v.41 no.3
    • /
    • pp.185-190
    • /
    • 2011
  • The purpose of this study was to evaluate the phagocytic uptake of surface modified PLGA microspheres containing ovalbumin (OVA) into dendritic cell. In order to find the most suitable formulation for targeted delivery to antigen presenting cells (APC), OVA was encapsulated by a double emulsion solvent evaporation method with three PLGA microspheres (PLGA 50:50, PLGA 75:25 and PLGA 85:15) and two surface modified microspheres by chitosan and sodium dodecyl sulfate (SDS). Physicochemical properties were evaluated in terms of size, zeta potential, encapsulation efficiency, different scanning calorimeter (DSC), x-ray diffraction, morphology, and OVA release test from microspheres. Phagocytic activity was estimated using dendritic cells and analyzed by fluorescence activated cell sorter (FACS). The result showed that zeta potential of PLGA particles was changed to positive by the chitosan modification. The release profile of chitosan modified PLGA microspheres exhibited sustained release after initial burst. The chitosan modified microspheres had higher phagocytic uptake than the other microspheres. Such physicochemical properties and phagocytic uptake studies lead us to conclude that chitosan modified microspheres is more suitable formulation for the targeted delivery of antigens to APC compared with the other microspheres.