• Title/Summary/Keyword: potential evaporation

Search Result 178, Processing Time 0.029 seconds

A Simulation Model for Estimating Evapotranspiration of Soybean Crop (콩 생육시기별 증발산량의 추정모형 설정)

  • Son, Eung-Ryong;Eom, Ki-Cheol;Ryu, Kwan-Sig;Kim, Ki-Joon
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.33 no.3
    • /
    • pp.254-261
    • /
    • 1988
  • Lysimeter and field experiments were conducted in Sandy Loam to establish a simple estimation model for evapotranspiration (ET) of soybean for three years (l984-1986). Potential ET (PET) could be estimated by the eq.1 using Pan-evaporation (Eo) and was ranged from 1.1 to 4.6 mm/day during the experiments. PET (mm/day)=1.348+0.573 Eo …(1) Crop coefficient (Kc=maximum ET/PET) could be estimated by the eq.2 using Growth degree (G=days after planting/total growing days) and was ranged from 0.2 to 1.1 and from 0.6 to 1.4 for monoculture cropping and double cropping followed by barley, respectively, during the experiments. Monoculture : Kc=0.016+3.719 G-3.224 G$^2$…(2), Double cropping : Kc=0.609+2.014 G-2.120 G$^2$…(2). However, the maximum Kc was shown when G was about 50% and 40% for the monoculture and the double cropping, respectively. Soil water coefficient (f=AET/maximum ET) could be estimated by the eq.3 using soil water tension (Ψ) in 15cm depth. and it was decleased to 0.2 when Ψ was 10 bar. f=0.755-0.537 log │Ψ│…(3) Consequentially, the model to estimate the Actual ET (AET) of soybean was determined as eq.4 with the correction coefficient of -0.380. AET(mm/day)=PETㆍKcㆍf -0.380 …(4) The estimated AET were compared with the measured AET to verify the model established above. The average deviation of the estimated ET(AET) was 0.5782$\pm$0.338 (mm/day), and it would be within reasonable confidence range.

  • PDF

Validation of the Complementary Relationship of Evapotranspiration Hypothesis Using In-situ Measurements (관측자료 기반의 용담댐 유역 증발산 보완관계 가설 검증)

  • Eunji Kim;Boosik Kang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.264-264
    • /
    • 2023
  • 물순환 과정에서의 증발산은 장기적인 관점에서의 수자원 계획 수립 시 중요한 요소이다. 증발산은 기온, 상대습도, 일사량 등 기상학적 인자뿐만 아니라 증발표면, 식생분포 등 다양한 인자의 복합작용에 의해 일어나므로, 유역 단위에서 발생한 실제증발산(Actual evapotranspiration, AET)을 측정하기에는 기술적인 한계가 존재한다. 그러나 증발산 보완관계(Complementary relationship of evapotranspiration, CRE) 가설을 활용하면, 수문요소의 상호작용을 고려한 모델링을 거치지 않고도, 비교적 간단하게 AET를 추정할 수 있다. 본 연구는 증발산 관측자료를 기반으로 유역 단위에서의 CRE를 검증하고자 하며, 플럭스 타워 등 다양한 관측장비가 설치되어 있는 용담댐 시험유역을 대상유역으로 선정하였다. 용담댐 유역 내 산지에 위치한 덕유산 플럭스 타워에서 측정된 증발산을 AET로 보았으며, 유역 인근에 위치한 전주 기상관측소에서 측정되는 팬 증발량(Epan)을 잠재증발산량(Potential evapotranspiration, PET)으로 보았다. Epan 계측시, 증발팬의 가열 등 주변환경 변화로 인해 과다하게 추정되는 값을 보완하기 위해 FAO Penman-Monteith 식을 활용해 팬 증발량 보정계수(Coefficient of pan evaporation, kp)를 산정하여 적용하였다. 습윤증발산량(Wet evapotranspiration, WET)은 대기가 완전히 포화되었을 때 발생하는 증발산량으로, 댐 수표면에서 계측되는 수면증발량을 WET로 보았다. CRE 검증을 위해 AET와 PET를 각각 WET로 나누어 AET+와 PET+로 무차원화하였으며, 습윤지수(Moisture Index, MI)는 AET를 PET로 나누어 산정하였다. CRE 가설은 MI에 따른 AET+와 PET+가 서로 보완관계를 갖는다는 것인데, 용담댐 유역의 관측자료를 활용하여 CRE를 검증한 결과 AET+와 PET+ 간의 비대칭계수(b)가 1.23인 것으로 나타났다. 이 때의 평균제곱오차(MSE)는 0.599, 결정계수(R2)는 0.631로 나타나 CRE의 b가 적합하게 추정된 것으로 판단된다. 본 연구결과와 같이 검증된 CRE를 통해 증발산 관측지점이 없거나, 조밀하지 않은 유역의 AET를 간접추정할 수 있으며, 이를 활용해 보다 정확한 댐의 장기유출 모의와 용수공급계획 수립에 도움을 줄 수 있을 것으로 기대된다.

  • PDF

Effect of Ag Alloying on Device Performance of Flexible CIGSe Thin-film Solar Cells Using Stainless Steel Substrates

  • Awet Mana Amare;Inchan Hwang;Inyoung Jeong;Joo Hyung Park;Jin Gi An;Soomin Song;Young-Joo Eo;Ara Cho;Jun-Sik Cho;Seung Kyu Ahn;Jinsu Yoo;SeJin Ahn;Jihye Gwak;Hyun-wook Park;Jae Ho Yun;Kihwan Kim;Donghyeop Shin
    • Current Photovoltaic Research
    • /
    • v.11 no.1
    • /
    • pp.8-12
    • /
    • 2023
  • In this work, we investigated the thickness of Ag precursor layer to improve the performance of flexible CIGSe solar cells grown on stainless steel (STS) substrates through three-stage co-evaporation with Ga grading followed by alkali treatments. The small amount of incorporated Ag in CIGSe films showed enhancement in the grain size and device efficiency. With an optimal 6 nm-thick Ag layer, the best cell on the STS substrate yielded more than 16%, which is comparable to the soda-lime glass (SLG) substrate. Thus, the addition of controlled Ag combined with alkali post-deposition treatment (PDT) led to increased open-circuit voltage (VOC), accompanied by the increased built-in potential as confirmed by capacitance-voltage (C-V) measurements. It is related to a reduction of charge recombination at the depletion region. The results suggest that Ag alloying and alkali PDT are essential for producing highly efficient flexible CIGSe solar cells.

Preparation and evaluation of proliposomes formulation for enhancing the oral bioavailability of ginsenosides

  • Duy-Thuc Nguyen;Min-Hwan Kim;Min-Jun Baek;Nae-Won Kang;Dae-Duk Kim
    • Journal of Ginseng Research
    • /
    • v.48 no.4
    • /
    • pp.417-424
    • /
    • 2024
  • Background: This research main objective was to evaluate a proliposomes (PLs) formulation for the enhancement of oral bioavailability of ginsenosides, using ginsenoside Rg3 (Rg3) as a marker. Methods: A novel PLs formulation was prepared using a modified evaporation-on-matrix method. Soy phosphatidylcholine, Rg3-enriched extract, poloxamer 188 (Lutrol® F 68) and sorbitol were mixed and dissolved using a aqueous ethanolic solution, followed by the removal of ethanol and lyophilization. The characterization of Rg3-PLs formulations was performed by powder X-ray diffractometry (PXRD), transmission electron microscopy (TEM) and in vitro release. The enhancement of oral bioavailability was investigated and analyzed by noncompartmental parameters after oral administration of the formulations. Results: PXRD of Rg3-PLs indicated that Rg3 was transformed from crystalline into its amorphous form during the preparation process. The Rg3-encapsulated liposomes with vesicular-shaped morphology were generated after the reconstitution by gentle hand-shaking in water; they had a mean diameter of approximately 350 nm, a negative zeta potential (- 28.6 mV) and a high entrapment efficiency (97.3%). The results of the in vitro release study exhibited that significantly more amount of Rg3 was released from the PLs formulation in comparison with that from the suspension of Rg3-enriched extract (control group). The pharmacokinetic parameters after oral administration of PLs formulation in rats showed an approximately 11.8-fold increase in the bioavailability of Rg3, compared to that of the control group. Conclusion: The developed PLs formulation could be a favorable delivery system to improve the oral bioavailability of ginsenosides, including Rg3.

Solution-Processed Indium-Gallium Oxide Thin-Film Transistors for Power Electronic Applications (전력반도체 응용을 위한 용액 공정 인듐-갈륨 산화물 반도체 박막 트랜지스터의 성능과 안정성 향상 연구)

  • Se-Hyun Kim;Jeong Min Lee;Daniel Kofi Azati;Min-Kyu Kim;Yujin Jung;Kang-Jun Baeg
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.37 no.4
    • /
    • pp.400-406
    • /
    • 2024
  • Next-generation wide-bandgap semiconductors such as SiC, GaN, and Ga2O3 are being considered as potential replacements for current silicon-based power devices due to their high mobility, larger size, and production of high-quality wafers at a moderate cost. In this study, we investigate the gradual modulation of chemical composition in multi-stacked metal oxide semiconductor thin films to enhance the performance and bias stability of thin-film transistors (TFTs). It demonstrates that adjusting the Ga ratio in the indium gallium oxide (IGO) semiconductor allows for precise control over the threshold voltage and enhances device stability. Moreover, employing multiple deposition techniques addresses the inherent limitations of solution-processed amorphous oxide semiconductor TFTs by mitigating porosity induced by solvent evaporation. It is anticipated that solution-processed indium gallium oxide (IGO) semiconductors, with a Ga ratio exceeding 50%, can be utilized in the production of oxide semiconductors with wide band gaps. These materials hold promise for power electronic applications necessitating high voltage and current capabilities.

A Study on Changes of Physico-Chemical Properties of Plow Layer Soil and its Response of Tobacco Growth under Poly Ethylene Film Mulching Condition. -1. Effect of Poly Ethylene Film Mulch on Changes of Soil Temperature and Soil Moisture Content in the Rhizosphere (연초피복재배(煙草被覆栽培)에서 작토시(作土尸)의 이화학성변화(理化學性變化)와 연초생장반응(煙草生長反應)에 관(關)한 연구(硏究) -1. 피복조건(被覆條件)이 근권(根圈)의 토양온도(土壤溫度)와 수분변화(水分變化)에 미치는 영향(影響))

  • Hong, Soon-Dal;Lee, Yun-Hwan;Kim, Jai-Joung;Cho, Seong-Jin
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.18 no.1
    • /
    • pp.20-26
    • /
    • 1985
  • Under the field condition mulched by polyethylene film, changes of the soil moisture content and soil temperature due to the meteorological influence, which have had a great effect upon productivity of upland - field crop, was investigated. The results obtained were as follows; 1. During the early growth stage from the first part of April to the last part of May, soil temperature at 15cm below the mulched surface of ridge (13:00) was about $5^{\circ}C$ higher than that of non-mulched plot. 20 days earlier than normal soil temperature reached up to $20^{\circ}C$ due to the mulching. The increasing of soil temperature resulted from poly ethylene film mulching had a similar tendency for the annual experiment of 3 years (1982-1984). 2. Changes of the soil moisture content in the plow layer during the growing season was remarkably less in the mulched plot than in the non-mulched plot due to suppression of evaporation by polyethylene film. 3. Soil moisture contents of the plots planted with tobacco was lower than those of the non-planted plots owing to the more transpiration induced by growing of the tobacco plant. As the results, it was refered that initial fresh weight of above ground part of tobacco that had an influence upon the consumption of soil moisture by the transpiration rather than evaporation was about 250g per plant. 4. At the appreciable amount of rainfall (for instance; 63.5mm), soil moisture content at middle place between plants in the plow layer of the mulched plot was not increased owing to the infiltration interruption by polyethylene film. 5. By the comparatively small amount of rainfall (e.g. 20mm) after the drought period, leaf water potential of the mulched plot was not increased as much as that of the non-mulched plot owing to the less moisture content of soil resulted from interruption of rainfall.

  • PDF

The Measurement and Evaluation of X-ray Characteristics of Cadmium Sulfide as a Multi-function Dosimeter (다기능 선량계로서의 Cadmium sulfide의 X-선에 대한 특성 평가)

  • Park, Sung-Kwang;Park, Young-Min;Cho, Heung-Lae;Nam, Sang-Hee
    • Progress in Medical Physics
    • /
    • v.14 no.3
    • /
    • pp.161-166
    • /
    • 2003
  • To evaluate the performance of cadmium sulfide as a multi-function X-ray dosimeter, we made an X-ray detector that was based on cadmium sulfide using evaporation technology, and measured its response to X-ray exposure. The voltages of cadmium sulfide were measured on the various X-ray tube potentials, X-ray tube currents and exposure times. The regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0995x-0.1146 ($R^2$=0.9595, $\sigma$=0.08, standard error=2%) and the regression analysis of the voltage response of CdS on the tube-potential variation was y=0.0439x+1.1891 ($R^2$=0.9021, $\sigma$=0.04, standard error=1.8%) The regression analysis of the voltage response of CdS on the X-ray exposure time variation was y=8.2853+5.5878 ($R^2$=0.7287, $\sigma$=0.06, standard error=1.9%). In conclusion, cadmium sulfide responded linearly to the variation X-ray conditions, suggesting cadmium sulfide to be a feasible X-ray sensor of multi-function dosimeter related instruments.

  • PDF

Agro-climate Characteristics and Stability in Crop Production of Daegwallyeong Area in Korea (기상자료 분석을 통한 대관령 지역의 작물 최저 한계온도일 추정)

  • Ryu, Jong-Soo;Lee, Jeong-Tae;Lee, Gye-Jun;Oh, Dong-Shig
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.45 no.6
    • /
    • pp.1153-1156
    • /
    • 2012
  • Daegwallyeong area to be formed along the mountainous terrain more above 800 m of sea level is known as the cold zone to occur frequently wind, rain and fog. This study to evaluate the stability of crop production and agricultural production potential in the Daegwallyeong was calculated for the low temperature frequency of occurrence and potential evapotranspiration changes with announce the release of Korea Meteorological Administration (KMA) from 1972 to 2009 up to 38 years. Evapotranspiration calculated FAO and other international standard method authorized under the PENMAN-MONTEITH Method was used, and the low temperature onset and frequency of the Gumbel probability density function was used. As a result, the variation of day evaporation for 38 years were showed to respectively width of variation from maximum $9mm\;day^{-1}$ to minimum $0.5mm\;day^{-1}$. The frequency of reappearance to first emergence day that lasts more than 5 days with temperature $5^{\circ}C$ over is 3 April a 50-year frequency, 10 April a 25-year frequency, 20 April a 10-year frequency, 28 April a 5-year frequency, 8 May a 2-year frequency. Psychrotrophic crop to growth temperature more than $5^{\circ}C$ can be secured to stable production with planting after May 8, prior to planting for normal growth can be seen that the risk of growth.

Agricultural Climatology of Cheju Island II. Potential Evapotranspiration Based on Near-Real Time Data Measured by Automated Weather Stations (제주도의 농업기후 분석 II. 무인관측강에 의한 기상실황자료 수집 및 증발산위 계산)

  • 윤진일
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.35 no.6
    • /
    • pp.504-511
    • /
    • 1990
  • Weather data acquisition and potential evapotranspiration (PET) calculation procedure were investigated to support the agricultural development efforts in the mid-altitude mountainous region of Cheju Island. Automated weather stations (AWS) were installed at two points representing the east and the west of the study area. A personal computer was employed to collect the near-real time weather data from AWS through the public telephone line. Hourly data were available for solar radiation, air and soil temperature, relative humidity, wind speed and direction, and precipitation. Based on the data for the month of June 1989, daily climatic features were comparatively analyzed for the two areas and the Penman equation was used to calculate PET. Air temperature was higher by 1 to 2 degree C in the east due mainly to the higher solar radiation and partly to the Fohn effect caused by the daytime southwesterly blowing over Mt. Halla. Diurnal march of soil temperature lagged by 4 hours behind that of air temperature and the diurnal range for 10cm subsurface soil was 3 degree C. Wind was consistently stronger and a marked sea-land breeze circulation was detected in the west. Calculated PET values were higher in the east by 6% than in the west. Overall values from the east and the west of the mid-altitude mountainous region were higher by 30% than those of the coastal region, which were estimated from the Class A Pan evaporation measured by the Korea Meteorological Service Offices.

  • PDF

Preparation of Lipid Nanoparticles Containing Paclitaxel and their in vitro Gastrointestinal Stability (파클리탁셀을 함유한 지질나노입자의 제조와 인공 소화액에서의 안정성 평가)

  • Kim, Eun-Hye;Lee, Jung-Eun;Lim, Deok-Hwi;Jung, Suk-Hyun;Seong, Ha-Soo;Park, Eun-Seok;Shin, Byung-Cheol
    • Journal of Pharmaceutical Investigation
    • /
    • v.38 no.2
    • /
    • pp.127-134
    • /
    • 2008
  • Peroral administration is the most convenient one for the administration of pharmaceutically active compounds. Most of poorly water-soluble drugs administered via the oral route, however, remain poorly available due to their precipitation in the gastrointestinal (GI) tract and low permeability through intestinal mucosa. In this study, one of drug delivery carriers, lipid nanoparticles (LNPs) were designed in order to reduce side effects and improve solubility and stability in GI tract of the poorly water soluble drugs. However, plain LNPs are generally unstable in the GI tract and susceptible to the action of acids, bile salts and enzymes. Accordingly, the surface of LNPs was modified with polyethylene glycol (PEG) for the purpose of improving solubility and GI stability of paclitaxel (PTX) in vitro. PEG-modified LNPs containing PTX was prepared by spontaneous emulsification and solvent evaporation (SESE) method and characterized for mean particle diameter, entrapping efficiency, zeta potential value and in vitro GI stability. Mean particle diameter and zeta potential value of PEG-modified LNP containing PTX showed approximately 86.9 nm and -22.9 mV, respectively. PTX entrapping efficiency was about 70.5% determined by UV/VIS spectrophotometer. Futhermore, change of particle diameter of PTX-loaded PEG-LNPs in simulated GI fluids and bile fluid was evaluated as a criteria of GI stability. Particle diameter of PTX-loaded PEG-LNPs were preserved under 200 nm for 6 hrs in simulated GI fluids and bile fluid at $37^{\circ}C$ when DSPE-mPEG2000 was added to formulation of LNPs above 4 mole ratio. As a result, PEG-modified LNPs improved stability of plain LNPs that would aggregate in simulated GI fluids and bile solution. These results indicate that LNPs modified with biocompatible and nontoxic polymer such as PEG might be useful for enhancement of GI stability of poorly water-soluble drugs and they might affect PTX absorption affirmatively in gastrointestinal mucosa.