• 제목/요약/키워드: potassium sulfate

검색결과 209건 처리시간 0.027초

한국산 재래종 담배잎에서 정제한 Polyphenol Oxidase의 성상에 관한 연구 (Some Properties of Polyphenol Oxidase Purified from Korean Native Tobacco Variety Leaves)

  • 박수선;김안근;박금영
    • 생약학회지
    • /
    • 제20권2호
    • /
    • pp.101-109
    • /
    • 1989
  • Purification of polyphenol oxidase(PPO) from Korean native tobacco variety leaves was carried out through the procedure of acetone preciptation, ammonium sulfate fractionation, and Sephadex G-150 gel filtration, resulting in a 84-fold increase in specific activity. The enzyme was stable in a range of pH 7.5 to 8.0 with an optimum of pH 7.5. The optimum temperature for the enzymic reaction was about $60^{\circ}$. It was thermostable with a half-life equal to 20 min at $70^{\circ}$. Km values for (+)-catechin and pyrogallol were $1.6{\times}10^{-3}$ and $0.5{\times}10^{-3}M$, respectively. It possesses high catecholase activity but little or no cresolase activity. Lineweaver-Burk analysis of inhibition data revealed that the inhibition of (+)-catechin oxidation by potassium cyanide, 4-nitrocatechol, cystein and 2-mercaptoethanol was competitive with Ki values of $1.1{\times}10^{-6}$, $1.8{\times}10^{-6}$, $8.9{\times}10^{-6}$ and $1.3{\times}10^{-5}$, respectively.

  • PDF

Effect of Co-initiator on the Size Distribution of the Stable Poly(Styrene-co-Divinylbenzene) Microspheres in Acetone/Water Mixture

  • Choi, Jin-Young;Lee, Kang-Seok;Lee, Byung-Hyung;Choe, Soon-Ja
    • Macromolecular Research
    • /
    • 제17권7호
    • /
    • pp.483-490
    • /
    • 2009
  • Stable poly(styrene-co-divinylbenzene) [P(St-co-DVB)] micro spheres with narrow size distribution were synthesized in the presence of 2,2'-azobis(2,4-dimethyl valeronitrile) (V-65) and co-initiator in an acetone/water mixture in the precipitation polymerization at $53^{\circ}C$ for 24 h. Potassium peroxodisulfate (KPS), ammonium peroxodisulfate (APS) and sodium peroxodisulfate (NaPS) were used as co-initiators. The optimum ratio of acetone to water for the formation of a narrow distribution of P(St-co-DVB) particles was 49:11 (g/g). The optimum co-initiator compositions for narrow distribution were 9:1 (g/g) for V-65 to KPS, 11:1 for V-65 to APS and 6:1 for V-65 to NaPS. The yield for these compositions was $54{\sim}57%$ and the largest particle size was obtained with the lowest zeta-potential and CV values. From the XPS measurements, the charge density was increased but the zeta potential decreased with increasing sulfur content, implying that the sulfate group provides the electrostatic stabilization on the particle surface. This suggested that the self-crosslinking between styrene and DVB, the electrostatic stabilization of initiators, and the balanced hydrophobic and hydrophilic properties of the solvents are responsible for the formation of stable P(St-co-DVB) spherical particles with narrow size distribution.

들깨잎중의 폴리페놀 산화효소의 정제 및 특성 (Purification and Properties of Polyphenol Oxidase from Perillae Folium)

  • 박수선;김안근;노진희;심미옥
    • 약학회지
    • /
    • 제35권3호
    • /
    • pp.222-230
    • /
    • 1991
  • Polyphenol oxidase (PPO) was purified from an extract of Perillae Folium by ammonium sulfate fractionation and sephadex G-150 gel filtration, which molecular weight estimated 65,000$\pm$1,000 in SDS-gel electrophoresis, and pI value was 4.8. The pH and temperature optima were 6.0 and $30^{\circ}C$ respectively. $K_{m}$ values of the PPO for various phenolics derived from Lineweaver-Burk plots were 4.0$\times$10$^{-4}$, caffeic acid; 4.2$\times$10$^{-3}$M, 4-methylcatechol. The inhibition by 4-nitrocatechoi, potassium cyanide, cysteine, 2-mercaptoethanol was competitive with $K_{i}$ values of 7.6$\times$10$^{-5}$M, 7.2$\times$10$^{-5}$M, 3.6$\times$10$^{-5}$M, 2.2$\times$10$^{-5}$M, respectively. Among the divalent cations, Cu$^{2+}$ ion was strong activator on PPO and Zn$^{2+}$, Ni$^{2+}$ ions were little effect on PPO activity. In comparing the amino acid composition of Perillae Folium PPO with that of wheat isozyme, grape, spinach showed similarity. But the content of glycine phenylalanine was abundant relatively.

  • PDF

합성규산알루미늄의 최적 제조조건에 관한 연구 (A Study on the Optimum Manufacturing Conditions of Synthetic Aluminum Silicate)

  • 이계주
    • 약학회지
    • /
    • 제33권2호
    • /
    • pp.111-117
    • /
    • 1989
  • The optimum reaction conditions for the acid consuming capacity of aluminum silicate synthesized from the reaction of sodium silicate solution and potassium aluminum sulfate solution were investigated by Box-Wilson experimental design, and the micromeritic properties were examined by the means of BET $N_2$ adsorption, Hg penetrometer and methylen blue adsorption. The chemical composition of the samples were analyzed by gravitic method. The results were found to be as follows: optimum reaction temperature $54.7^{\circ}C$, both concentrations of reactant soln 15.7%, reactants molar ratio (Al/Si) 0.5 and drying temperature $65.0^{\circ}C$. The acid consuming capacity of the sample prepared by above optimum conditions was 68 ml and the chemical composition was $Al_2O_3{\cdot}3.6SiO_2{\cdot}3H_2O$. The relationship between acid consuming capacity and micromeritic properties could not found in the range of experiments. Therefore, it is assumed that the acid consuming mechanism of aluminum silicate depends on the neutralization of $Al_2O_3$ and buffer action of $SiO_2$ in sample.

  • PDF

Preparation and Characterization of Poly(butyl acrylate)/Poly(methyl methacrylate) Composite Latex by Seeded Emulsion Polymerization

  • Ju, In-Ho;Hong, Jin-Ho;Park, Min-Seok;Wu, Jong-Pyo
    • 한국응용과학기술학회지
    • /
    • 제19권2호
    • /
    • pp.131-136
    • /
    • 2002
  • As model waterborne acrylic coatings, mono-dispersed poly(butyl acrylate-methyl methacrylate) copolymer latexes of random copolymer and core/shell type graft copolymer were prepared by seeded multi-staged emulsion polymerization with particle size of $180{\sim}200$ nm using semi-batch type process. Sodium lauryl sulfate and potassium persulfate were used as an emulsifier and an initiator, respectively. The effect of particle texture including core/shell phase ratio, glass transition temperature and crosslinking density, and film forming temperature on the film formation and final properties of film was investigated using SEM, AFM, and UV in this study. The film formation behavior of model latex was traced simultaneously by the weight loss measurement and by the change of tensile properties and UV transmittance during the entire course of film formation. It was found that the increased glass transition temperature and higher crosslinking degree of latex resulted in the delay of the onset of coalescence of particles by interdiffusion during film forming process. This can be explained qualitatively in terms of diffusion rate of polymer chains. However, the change of weight loss during film formation was insensitive to discern each film forming stages-I, II and III.

고농도 칼륨처리를 활용한 원통형 종이포트 토마토묘의 도장억제 (Control of Stretching of Tomato (Lycopersicon esculentum Mill.) on Cylindrical Paper Pot Seedling Using High-Salinity Potassium Fertilizers)

  • 수찬;김시홍;김대훈;김재경;허재윤;넉탕부;최기영;김일섭;장동철
    • 생물환경조절학회지
    • /
    • 제29권4호
    • /
    • pp.354-364
    • /
    • 2020
  • 본 연구는 원통형 종이포트를 활용한 토마토 육묘시, 염스트레스를 활용하여 고온기 도장 억제가능성을 검토하기 위하여 수행되었다. 시험구는 K2SO4, KCl과 KH2PO4을 각 5, 10 dS·m-1로 처리하였고, 또한, 토마토 모종에 고염도의 칼륨을 처리하여 수분 및 저온스트레스 환경에서의 적응성 및 생존성을 조사하였다. 조사결과, 처리 농도가 높아질수록 지상· 하부 건물중, 옆면적, 순동화율 (NAR)이 감소하고, 경경과 충실도는 증가하였다. 수분 스트레스 처리 이후, 대조구는 심한 위조현상을 보였지만, KCl처리구는 양호하였다. 상대수분함량은 대조구에서 23%, KCl처리구에서 8% 감소 하였다. 또한, 대조구에 비하여 KCl 처리구는 저장시(9, 12 및 15℃ 모종의 손상 비율이 낮았다. 이와 같은 결과로 보아, KCl과 같은 고농도의 칼륨 처리가 원통형 종이포트 토마토 육묘의 도장 억제에 효과적이며 환경 스트레스 내성을 향상시키는 것으로 판단된다.

토양 pH와 질소 관비 비종에 따른 토마토 생육 및 토양화학성 변화 (Changes of Tomato Growth and Soil Chemical Properties as Affected by Soil pH and Nitrogen Fertilizers)

  • 강윤임;노미영;권준국;박경섭;조명환;이시영;이인복;강남준
    • 한국환경농학회지
    • /
    • 제29권4호
    • /
    • pp.328-335
    • /
    • 2010
  • 이 실험은 관비재배시 토양 pH와 질소 비종이 토마토 생육과 토양화학성에 미치는 영향에 대해 조사하고자 수행하였다. 시험작물은 동양계 품종인 '슈퍼도태랑'을 이용하여 18 L포트에서 3개월간 재배하였으며 토양 pH를 6.88과 8.77 두수준으로 조절하였다. 주요 관비 비종인 요소, 질산암모늄, 황산암모늄, 질산칼륨를 이용하였으며 관비 농도는 0, 10, 50, 100 mg N/L로 조절하였다. 토양의 pH가 8.77일 때 pH 6.88에 비하여 수량과 엽록소 형광반응이 감소하였으나 질산암모늄과 황산암모늄을 이용하여 관비할 경우 토마토 수량이 증가하는 것으로 나타났다. pH 6.88일 경우 비종보다는 관비 농도가 증가할수록 수량이 증가하였다. 토마토 재배후 비종에 따른 화학성 변화를 살펴보면 토양의 pH는 질산암모늄과 황산암모늄을 시용하였을 경우 감소하였으며 질산 칼륨 시용 시 토양 pH와 칼륨함량이 높아졌다. 토양 내 EC는 황산암모늄 100 mg N/L 시용 시 다른 비종에 비하여 2배 이상 높아졌다. 질산태질소와 암모늄태 질소는 비종별로 크게 차이는 없었지만 pH가 높을 때 토양 내 함량이 적은 것으로 나타났다. 이 실험 결과 요소와 질산암모늄을 관비용 비종으로 이용하면 토마토 재배 전 후 토양화학성의 변화가 크지 않은 것으로 나타났다.

몇가지 형태(形態)의 질소비료시비(窒素肥料施肥)가 수도(水稻)의 생육(生育) 및 수량(收量)에 미치는 영향(影響) (Application Effects of Some Nitrogen Fertilizers Forms for the Growth and Yield of Rice Plant)

  • 박창규;육창수;조광동
    • 한국토양비료학회지
    • /
    • 제18권1호
    • /
    • pp.78-88
    • /
    • 1985
  • 질소(窒素)의 형태(形態)가 상이(相異)한 몇가지 비종(肥種)이 수도(水稻)의 생육(生育) 및 수량(收量)에 미치는 영향(影響)을 구명(究明)코자 진주(眞珠)벼를 공시품종(供試品種)로 하여 4가지 질소형태(窒素形態)와 7종(種)의 비종(肥種)으로 질소(窒素) 시비량(施肥量)을 달리하여 Pot시험(試驗)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 토양중(土壤中) pH는 $NH_4-N$인 Ammonium Sulfate의 시용량(施用量)이 증대(增大)할수록 낮아졌으며 $NO_3-N$의 경우 부성분(副成分)이 없는 Nitric Acid구(區)는 시간이 경과함에 따라 pH가 높아졌으나 부성분(副成分)이 있는 $NO_3-N$ 비료(肥料)는 변화(變化)가 적었다. 2. 토양중(土壤中) $NH_4{^+}$ 함량(含量)은 N 15kg/10a구(區)에서는 비료형태(肥料形態)나 비종(肥種)에 관계없이 이앙후(移秧後) 14일(日)에 가장 낮았다. N 30kg/10a구(區)에서는 $NH_4-N$, Urea-N 등(等)은 17~24일(日)에 함량(含量)이 가장 낮았으나 $NO_3-N$는 31일(日)까지 계속 감소(減少)하였다. 3. 생육상황(生育狀況)은 질소시용량간(窒素施用量間)에 다소(多少) 차이(差異)가 있지만 간장(稈長), 고중(藁重) 등(等) 지상부(地上部)의 생육(生育)은 질소형태별(窒素形態別)로는 $NH_4-N$인 인산(燐酸)을 함유(含有)한 Ammonium Phosphate구(區)와 유황(硫黃)을 함유(含有)한 Ammonium Sulfate구(區), 그리고 Urea-N인 Urea구(區)에서 양호(良好)하였고 지하부(地下部) 뿌리의 생육(生育)은 $NO_3-N$인 질산구(窒酸區), Potassium Nitrate구(區) 및 Calcium Nitrate구(區)에서 양호(良好)하였다. 4. 수도(水稻)의 수량(收量)은 질소형태별(窒素形態別)로는 질소시용량간(窒素施用量間)에 다소(多少) 차이(差異)가 있으나 $NH_4-N$인 Ammonium Sulfate구(區), Ammonium Phosphates구(區)가 수량(收量)이 많았으며 $NO_3-N$인 Calcium Nitrate구(區) Potassium Nitrate구(區), Nitric Acid구(區)는 수량(收量)이 낮았다. 5. 식물체(植物體) 경엽중(莖葉中)에 N, P, Mg 및 Mn등(等) 무기성분(無機成分) 함량(含量)은 $NH_4-N$비료(肥料)에서 많았으며 Urea-N $NH_4-N+NO_3-N$의 순(順)로 적었다. 또한 $NO_3-N$ 비료(肥料)는 대체로 K, Ca 및 $SiO_2$ 등(等)의 무기성분(無機成分) 함량(含量)이 많았으나 N, P와 Mg, Mn, Fe 및 Mn등(等)의 함량(含量)이 적었다. 6. 식물체(植物體) 경엽중(莖葉中) 질소흡수(窒素吸收)의 증가(增加)는 인산흡수(燐酸吸收)를 증진(增進)시키는 상조작용(相助作用)이 있어 생육(生育) 및 수량증가(收量增加)에 기여하는 것으로 보였다. 반면(反面)에 $NO_3-N$ 비료(肥料) 중(中) K가 첨가(添加)된 비료구(肥料區)에서는 N, P, Ca 및 Mg, 그리고 Ca가 첨가(添加)된 비료구(肥料區)는 P, K 및 Mg 또한 $NO_3$-시용구(施用區)는 N, P, Mg흡수(吸收)를 감소(減少)시켰으며 N, P, Mg 및 Ca등(等)은 생육(生育) 및 수량증가(水量增加)에 크게 기여하는 것으로 보였다. 7. 수확기(收穫期) 벼 뿌리중 $SiO_2$, Zn, Fe 함량(含量)은 경엽(莖葉)에 비하여 많았고 N, P, Mg, Mn, Zn 및 Fe함량(含量)는 $NH_4-N$, Urea-N시용구(施用區)에서 많았고 K, Ca, $SiO_2$함량(含量)는 $NO_3-N$시용구(施用區)에서 많았다.

  • PDF

자낭균 곰보(Morchella esculenta)버섯의 인공재배에 관한 연구 (Studies on the Artificial Cultivation of Morchella esculenta in Ascomycetes)

  • 김한경;이강효;정종천;전창성;석순자;장갑열
    • 한국버섯학회지
    • /
    • 제7권1호
    • /
    • pp.9-21
    • /
    • 2009
  • 곰보버섯의 자실체 색은 갈색 또는 회갈색이고 갓의 형태는 원뿔모양이며, 대의 색은 흰 크림색 또는 흰색이다. 자실체를 반으로 잘라보면 갓과 대는 속은 비어있다. 자실체의 현미경 관찰에서 자낭의 크기는 $113.5{\sim}114.2{\times}9.3{\sim}10.3{\mu}m$, 자낭포자의 크기는 $17.6{\sim}20.9{\times}9.4{\sim}10.7{\mu}m$, 측사는 $40.0{\sim}45.2{\times}5.8{\sim}6.4{\mu}m$, 대의 안쪽세포는 $7.5{\sim}15.1{\mu}m$이었다. 곰보버섯 자실체 발생지 환경조건은 온도 $13.8^{\circ}C$, 습도 75.8%, 광 538룩스이며, 토성은 sand 72.7%, silt 21.0%, clay 6.3%로 silt loamy 이며, 유기물 함량은 10.0%로 밭 토양보다 많고 인산함량은 낮았다. 균주별 균사배양 최적배지는 PDB 배지이며, 배양최적 온도는 $25^{\circ}C$, pH는 5.0이었으며, 합성배지인 Czapek에 배지에 조정된 무기태 성분의 최적농도는 potassium phosphate 1%, sodium nitrate 2%, potassium chloride은 대조구에서 좋았다. 영양원 선발에서 최적 탄소원은 mannose이었으며, 최적농도는 5%이었다. 질소원은 대조구에 비하여 균사생육이 극히 저조하였다. 곰보버섯 균핵 형성 촉진배지 선발시험에서 균사생장과 균핵형성이 좋은 배지는 폐면 이었으며, 톱밥에서는 참나무톱밥에서 균사생장이 빨랐다. 폐면과 참나무톱밥의 혼합비율은 참나무톱밥 20%+폐면 80% 혼합수준에서 균핵 형성이 좋았고 첨가제인 밀기울의 혼합비율은 15-20%, 황산칼슘은 2% 수준에서 균핵 형성이 좋았다. 토양종류별 균핵 형성은 피트모스 처리구에서 균사생장 및 균핵 형성이 가장 좋았으며, 피트모스의 혼합비율은 60-80%이나, 참나무를 혼합하면 50:50으로 혼합 처리한 구에 밀기울을 30% 첨가하면 균핵 형성이 가장 좋았다.

  • PDF

이온선택성 멤브레인을 이용한 양액 내 질산태 질소 및 칼륨 측정 (Sensing NO3-N and K Ions in Hydroponic Solution Using Ion-Selective Membranes)

  • 김원경;박두산;김영주;노미영;조성인;김학진
    • Journal of Biosystems Engineering
    • /
    • 제35권5호
    • /
    • pp.343-349
    • /
    • 2010
  • Rapid on-site sensing of nitrate-nitrogen and potassium ions in hydroponic solution would increase the efficiency of nutrient use for greenhouse crops cultivated in closed hydroponic systems while reducing the potential for environmental pollution in water and soil. Ion-selective electrodes (ISEs) are a promising approach because of their small size, rapid response, and the ability to directly measure the analyte. The capabilities of the ISEs for sensing nitrate and potassium in hydroponic solution can be affected by the presence of other ions such as calcium, magnesium, sulfate, sodium, and chloride in the solution itself. This study was conducted to investigate the applicability of two ISEs consisting of TDDA-NPOE and valinomycin-DOS PVC membranes for quantitative determinations of $NO_3$-N and K in hydroponic solution. Nine hydroponic solutions were prepared by diluting highly concentrated paprika hydroponic solution to provide a concentration range of 3 to 400 mg/L for $NO_3$-N and K. Two of the calibration curves relating membrane response and nutrient concentration provided coefficients of determination ($R^2$) > 0.98 and standard errors of calibration (SEC) of < 3.79 mV. The use of the direct potentiometry method, in conjunction with an one-point EMF compensation technique, was feasible for measuring $NO_3$-N and K in paprika hydroponic solution due to almost 1:1 relationships and high coefficients of determination ($R^2$ > 0.97) between the levels of $NO_3$-N and K obtained with the ion-selective electrodes and standard instruments. However, even though there were strong linear relationships ($R^2$ > 0.94) between the $NO_3$-N and K concentrations determined by the Gran's plot-based multiple standard addition method and by standard instruments, hydroponic $NO_3$-N concentrations measured with the ISEs, on average, were about 10% higher than those obtained with the automated analyzer whereas the K ISE predicted about 59% lower K than did the ICP spectrometer, probably due to no compensation for a difference between actual and expected concentrations of standard solutions directly prepared.