• 제목/요약/키워드: potassium bromide

검색결과 26건 처리시간 0.022초

Enhanced electrocapacitive performance and high power density of polypyrrole/graphene oxide nanocomposites prepared at reduced temperature

  • Mudila, Harish;Joshi, Varsha;Rana, Sweta;Zaidi, Mohmd. Ghulam Haider;Alam, Sarfaraz
    • Carbon letters
    • /
    • 제15권3호
    • /
    • pp.171-179
    • /
    • 2014
  • An attempt was made to investigate the effect of the preparation temperature on the electrocapacitive performance of polypyrrole (PPY)/graphene oxide (GO) nanocomposites (PNCs). For this purpose, a series of PNCs were prepared at various temperatures by the cetyltrimethylammonium bromide-assisted dilute-solution polymerization of pyrrole in presence of GO (wt%) ranging from 1.0 to 4.0 with ferric chloride as an oxidant. The formation of the PNCs was ascertained through Fourier-transform infrared spectrometry, X-ray diffraction spectra, scanning electron microscopy and simultaneous thermogravimetric-differential scanning calorimetry. The electrocapacitive performance of the electrodes derived from sulphonated polysulphone-bound PNCs was evaluated through cyclic voltammetry with reference to Ag/AgCl at a scan rate (V/s) ranging from 0.2 and 0.001 in potassium hydroxide (1.0 M). The incorporation of GO into the PPY matrix at a reduced temperature has a pronounced effect on the electrocapacitive performance of PNCs. Under identical scan rates (0.001 V/s), PNCs prepared at $10{\pm}1^{\circ}C$ render improved specific conductivity (526.33 F/g) and power density (731.19 W/Kg) values compared to those prepared at $30{\pm}1^{\circ}C$ (217.69 F/g, 279.43 W/Kg). PNCs prepared at $10{\pm}1^{\circ}C$ rendered a capacitive retention rate of ~96% during the first 500 cycles. This indicates the excellent cyclic stability of the PNCs prepared at reduced temperatures for supercapacitor applications.

페닐히드라진과 브롬의 반응메카니즘에 관한 연구 (Kinetics Study of the Reaction of Bromine with Phenylhydrazine in Sulfuric Acid Media)

  • Park Byoung Bin;Park Il H.;Kong Young Kun;Choi Q. Won
    • 대한화학회지
    • /
    • 제21권4호
    • /
    • pp.227-234
    • /
    • 1977
  • 황산산성에서 페닐히드라진과 브롬의 반응을 속도론적으로 검토하였다. 겉보기 2차 반응속도상수는 1M 이하의 황산농도에서는 수소이온 농도에 대략 역비례한다. KBr 첨가의 영향을 검토하여 $Br_2\;및\;Br_3^-$가 반응화학종이고, 이들의 속도상수는 $20^{\circ}C$의 0.01M $H_2SO_4$용액에서 각각 $5{\times}10^5M^{-1},sec^{-1}\;및\;0. 7{\times}10^5M^{-1},sec^{-1}$임을 밝혔다. 2,4-디니트로 페닐히드라진의 브롬과의 반응속도상수는 수소이온 농도에 거의 무관계하며 $Br_2\;및\;Br_3^-$에 대하여 각각 $1.2{\times}10^5M^{-1},sec^{-1}\;및\;2.0{\times}10^4M^{-1},sec^{-1}$이다.

  • PDF

해양방선균으로부터 Haloperoxidase의 검색과 특성 (Screening and Partial Purification of Haloperoxidase from Marine Actinomycetes)

  • 조기웅
    • 미생물학회지
    • /
    • 제44권2호
    • /
    • pp.116-121
    • /
    • 2008
  • Haloperoxidase를 생산하는 미생물을 분리하기 위하여 국내 연근해와 남북극 등의 해양시료에서 분리된 방선균 균주를 대상으로 탐색을 수행하여 남해 백도 해조류 추출물로부터 분리된 한 종류의 방선균(#1460)에서 높은 haloperoxidase 활성이 확인되었다. 본 균주의 생리.생화학적 특성은 Streptomyces 속과 유사하며 생산되는 haloperoxidase는 세포 조 추출물로부터 ammonium sulfate precipitation, High-Q column chromatography, gel permeation chromatography, Hydroxyapetite chromatography 그리고 hydrophobic interaction chromatography를 통하여 42%의 수율과 purification fold 70으로 정제하였다. 본 효소의 최적 반응 pH는 7이고 pH 8에서 더 높은 안정성을 보여 $60^{\circ}C$에서 1시간 반응에 효소활성의 50%가 생존한다. 또 cyanide와 azide 이온에 의해 강한 저해현상을 보인다.

A COMPARATIVE STUDY BETWEEN DEGREE OF CONVERSION AND FLEXURAL STRENGTH OF COMPOSITE RESINS

  • Lee Seong-Hee;Pae Ahran;Kim Sung-Hun
    • 대한치과보철학회지
    • /
    • 제44권3호
    • /
    • pp.333-342
    • /
    • 2006
  • Statement of problem. Although many studies have been carried out to investigate the correlation between the degree of conversion and the flexural strength of composite resins, there is minimal information in the literature attempting to compare degree of conversion, flexural strength and their correlation between restorative composite resins and flowable composite resins. Purpose. The purposes of this study were to measure the degree of conversion and flexural strength of composite resins with different rheological behavior and to correlate the two properties. Materials and methods. Four restorative (Vit-1-escence, Z-250, Tetric ceram, Esthet-X) and four flowable (Aeliteflo, Admiraflow, Permaflo, Revolution) light-curing composite resins were investigated. The degree of conversion(DC) was analyzed with Fourier transfer infra-red spectroscopy(FTIR) spectrum by a potassium bromide(KBr) pellet transmission method. The spectrum of the unpolymerized specimen had been measured before the specimen was irradiated for 60s with a visible light curing unit. The Poiymerized specimen was scanned for its in spectrum. The flexural strength(FS) was measured with 3-point bending test according to ISO 4049 after storage in water at $37^{\circ}C$ for 24 hours. The data were statistically analyzed by an independent sample t-test and one-way ANOVA at the significance level of 0.05. The dependence of flexural strength on the degree of conversion was also analyzed by regression analysis. Results. Mean DC and FS values ranged from 43% to 61% and from 84.7MPa to 156.7MPa respectively. DC values of the flowable composite resins were significantly higher than those of restorative composite resins (P < 0.05). The FS values of restorative composite resins were greater than those of flowable composite resins. No statistically significant correlation was observed between the DC and the FS tested in any of the composites. The dependence of FS on DC in restorative or flowable composite resins was not significant. Conclusion. It can be concluded that radical polymerization of the organic matrix is not a major factor in determining flexural strength of the commercially available composite resins.

중요민속자료(복식)의 보존처리 (The Conservation Treatment for the Important Folklore Materials-Clothes)

  • 한성희;이규식
    • 보존과학연구
    • /
    • 통권14호
    • /
    • pp.94-108
    • /
    • 1993
  • The cultural properties of cloth are of animal orgin (silk), or of vegetable orgin(cotton, hemp, ramie). As clothes are of an orginic material, they were subjected to damage by chemical, phisigical or biological factors, viz, moulds insects, lights, humidity and temperature changes, etc. And these factors promote that clothes generally result from various types of deterioration. In 1992, We were performed the conservation treatments for total 9 pieces of cloth, such as 3 pieces of General PAK SHIN-RYONG(Important Folklore Material No.110) 3 pieces of Madam Jung(Important Folklore Material No.115) and 1 piece of King Se-jo(Important Folklore Material No.219). The procedure of the conservation treatment for clothes describe the following below. 1) The washing and dry-cleaning to remove the contaminated substances from cloth was used 0.2% stearyl potassium soap solution and the mixture solution compound of n-Hexane, C6H14. and n-Decane, C10H22. And after the washing and dry-cleaning, the dry of clothes was carried out in a warm condition. These steps were repeated in 2 times over for each cloth. 2) The repair of clothes was attached the similar textiles to stronger fabric linings by needlework.3) The reprodution was made for cloth of King Se-jo to equalize the type, color, quality and skill of materials. 4) After these above procedures, all clothes fumigated to prevent the biodeterioration by using the mixed gas of methyl bromide and ethylene oxide as insecticide and fungicide. 5) Finally for the purpose to keep in a safety long-term condition, the treated clothes sealed with Biaxially Oriented Polyvinylacohol Film(BO-PVA film) and Helium, purity 99.999%, filled up in sealed BO-PVA film bag.

  • PDF

자기조립단분자막을 위한 보편적이고 기능화된 긴 사슬 알킬티올 연결자의 제조 (Preparations of Universal, Functionalized Long-Chain Alkylthiol Linkers for Self-assembled Monolayers)

  • 유동진;이경섭;김애란;남기석
    • Korean Chemical Engineering Research
    • /
    • 제49권3호
    • /
    • pp.330-337
    • /
    • 2011
  • 본 연구에서는 자기조립단분자막(SAM)의 연구에 유용한 일련의 $\omega$-mercapto alkyl amine 1 및 $\omega$-mercapto alkanoic acid 2를 만드는 제조공정을 서술하였다. 먼저 첫 번째 목표물질인 $\omega$-mercapto alkyl amine 1의 제조방법은 다음과 같다: 먼저 시중에서 시판되는 potassium phthalimide와 $\omega$-bromo alcohol을 $80{^{\circ}C}$, DMF 용매에서 치환반응으로 화합물 3을 합성하였다. 아민기와 알코올기를 포함하는 화합물 4을 합성하기 위하여 먼저 화합물 3를 hydrazine hydrate로 환류시킨 후, 이어서 c-HCl로 처리하여 부반응물 5를 수반하여 생성물 4를 76-98% 수율로 만들었다. $\omega$-aminoakanol 4의 hydroxyl기를 HBr로 브로민화반응을 하여 $\omega$-bromoamine 화합물 6을 34-97% 수율로 만들었다. 티올기를 도입하기 위하여 화합물 6을 95% 에탄올 속에서 thiourea와 치환 반응하여 $\omega$-aminoalkanthiuronium 7을 만든 다음, 이 화합물을 센 염기(KOH)와 센 산으로 처리하여 목표화합물, $\omega$-mercapto alkylamines 1을 총 5단계를 걸쳐서 제조하였다. 덧붙여 두 번째 목표물질인 $\omega$-mercapto alkanoic acid 2는 다음과 같이 2단계를 통하여 제조하였다: $\omega$-bromo alkanoic acid를 95% 에탄올 속에서 thiourea로 처리하여 화합물 7을 만든 다음, 센 염기(KOH)를 처리하여 thiuronium bromide 를 제거한 후, 다시 센 산(HCl) 수용액으로 처리하여 두 번째 목표화합물 $\omega$-mercapto alkanoic acid 2을 얻었다. 제조한 긴 사슬 알킬티올 1과 2 유도체들은 금속(Au, Pt, Ti)에 자기조립단분자 막을 형성함으로써 단백질, 효소 및 다양한 생체분자를 고정하는 연결자로 사용될 수 있으며, 그 밖에 금속의 표면개질을 이용하여 다양한 응용 연구를 위한 화학 도구로 사용될 수 있다.