• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.4
• /
• pp.347-353
• /
• 2022

Traditional denture treatment is often performed in patients with the completely edentulous maxilla and the bilateral edentulous posterior mandible. However, with a long-term prognosis, a complication called 'combination syndrome' may occur in this oral environment. In this case, by applying an implant-assisted removable partial denture (IARPD), it is possible to preserve the alveolar bone and prevent combination syndrome. In this case, when additional implants are placed in the edentulous area, the stress applied to the abutment due to the movement of the removable denture can be reduced, so it is possible to design an esthetic clasp using resin rather than metal, and flexible denture base resin is used. As a treatment for maxillary complete denture and mandibular flexible IARPD, it showed an esthetic and functional long-term prognosis with minimal cost and surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.3
• /
• pp.159-166
• /
• 2022

Objectives: The stability of crestal bone has been reported as a major factor in the success of dental implants. Implants can be placed in an equicrestal (crestal) or subcrestal position. The aim of this study was to evaluate the effect of implant depth placement on marginal bone loss. Materials and Methods: The study was created in a split-mouth design. Immediately after implant surgery, digital parallel radiographs were prepared and levels of bone were measured where marginal bone loss and bone level changes occurred. These measurements were repeated at 3-month and 6-month follow-up periods. Results: In this interventional study, 49 implants were evaluated in 18 patients. Primary bone height was not significant between the intervention and control groups in both mesial and distal aspects at 3 months and 6 months from the baseline. The mean marginal bone loss on the mesial side was 1.03 mm in the subcrestal group and 0.83 mm in the crestal group. In addition, mean marginal bone loss on the distal side was 0.88 mm and 0.81 mm in the subcrestal and crestal groups, respectively. Marginal bone loss was not significantly different between sexes, the maxilla or mandible, and in the anterior or posterior regions as well as between different lengths and diameters of implants. Conclusion: Based on the results of this study, there was no significant difference in terms of marginal bone loss between crestal and subcrestal implants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.1
• /
• pp.73-81
• /
• 2023

There are various approaches to treatment for patients with fully edentulous jaw. In maxilla, it is easy to obtain sufficient stability, support, and retention with the traditional full denture method. In mandible, however, there are difficulties caused by anatomical limitations. In this case, treatment with implants can be considered. If it is difficult to place implants in posterior area, a fixed complete denture can be considered, using 4 - 5 implants anterior to mental foramen. This approach has changed in many ways, such as surgical methods and materials used, over the years. This case report compares two approaches and their changes over time, especially in the cases of mandibular fixed prostheses using implants, paired with maxillary complete denture.

• Archives of Craniofacial Surgery
• /
• v.24 no.4
• /
• pp.167-173
• /
• 2023

Background: Mandibular split fractures, in which the fracture occurs exclusively in the posterior wall, are uncommon. This study aimed to enhance clinicians' understanding of mandibular split fractures and offer insights for future research. Methods: This study included six patients who visited our hospital between January 2020 and June 2023 and were diagnosed with mandibular split fractures. We retrospectively collected data from patients' medical records on their age, sex, symptoms, mechanism, impact site, associated injuries, and treatment method, as well as the location, pattern, and number of fractures observed on computed tomography (CT) and panoramic images. The frequency of split fractures among all mandibular fractures was calculated. Results: The six patients included three men (50%) and three women (50%), ranging in age from 20 to 71 years (mean age, 49.8 years). The split fractures were located in the symphysis in one patient (16.7%), symphysis to parasymphysis in two patients (33.3%), parasymphysis in one patient (16.7%), and parasymphysis to the body in two patients (33.3%). Four patients (66.7%) had condylar head fractures, while two patients (33.3%) had single split fractures. The mechanism of trauma was a slip-down incident in four cases (66.7%), while two cases (33.3%) were caused by motorcycle traffic accidents. Four patients (67%) underwent intermaxillary fixation, while two patients (33%) improved with conservative treatment. Split fractures were diagnosed in all six patients on CT, whereas the fracture line was not clearly visible on panoramic images. Mandibular split fractures accounted for 5.6% of all mandibular fractures. Conclusion: This study provides insights into the clinical characteristics of rare mandibular split fractures and the diagnostic imaging findings. Furthermore, CT scans and three-dimensional image synthesis-instead of panoramic images-may be essential for accurately diagnosing mandibular fractures, including mandibular split fractures, in the future.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.3
• /
• pp.146-157
• /
• 2023

The bite collapses due to posterior teeth loss or wear results in inadequate space for restoration and esthetic concerns. Increasing the occlusal vertical dimension to improve space deficiency rotates the mandible posteriorly, creating a gap between the maxillary and mandibular anterior teeth, leading to loss of anterior guidance. To solve this problem, the prosthodontics or orthodontics treatments are the commonly used methods for proper anterior guidance. However, it is reasonable to assume that the anterior teeth can naturally relapse to their original position when the occlusal force is eliminated. Therefore, this case report aimed to test whether natural relapse could recover the lost anterior guidance to develop a less invasive and more convenient treatment method. Digital superimposition was used to evaluate the changes in anterior teeth alignment to confirm the change of the recovered anterior guidance. The appropriate indications for this new treatment method were defined and applied clinically.

• Journal of Periodontal and Implant Science
• /
• v.54 no.3
• /
• pp.189-204
• /
• 2024

Purpose: This pilot study was conducted to develop a novel test setup for the in vitro assessment of the primary stability of dental implants. This was achieved by characterising their long-term behaviour based on the continuous recording of micromotions resulting from dynamic and cyclic loading. Methods: Twenty screw implants, each 11 mm in length and either 3.8 mm (for premolars) or 4.3 mm (for molars) in diameter, were inserted into the posterior region of 5 synthetic mandibular models. Physiological masticatory loads were simulated by superimposing cyclic buccal-lingual movement of the mandible with a vertically applied masticatory force. Using an optical 3-dimensional (3D) measuring system, the micromotions of the dental crowns relative to the alveolar bone resulting from alternating off-centre loads were concurrently determined over 10,000 test cycles. Results: The buccal-lingual deflections of the dental crowns significantly increased from cycle 10 to cycle 10,000 (P<0.05). The deflections increased sharply during the first 500 cycles before approaching a plateau. Premolars exhibited greater maximum deflections than molars. The bone regions located mesially and distally adjacent to the loaded implants demonstrated deflections that occurred synchronously and in the same direction as the applied loads. The overall spatial movement of the implants over time followed an hourglass-shaped loosening pattern with a characteristic pivot point 5.5±1.1 mm from the apical end. Conclusions: In synthetic mandibular models, the cyclic reciprocal loading of dental implants with an average masticatory force produces significant loosening. The evasive movements observed in the alveolar bone suggest that its anatomy and yielding could significantly influence the force distribution and, consequently, the mechanical behaviour of dental implants. The 3D visualisation of the overall implant movement under functional cyclic loading complements known methods and can contribute to the development of implant designs and surgical techniques by providing a more profound understanding of dynamic bone-implant interactions.

• The korean journal of orthodontics
• /
• v.30 no.1 s.78
• /
• pp.43-52
• /
• 2000

Hemifacial microsomia ( HFM ) is the second most common craniofacial abnormalies. HFM represnted a spectrum of clinical findings such as hypoplasia of the mandibular ramus and condyle, confinement of maxilla growth, external and/or middle ear defects, involvement of some cranial suture, buccal soft tissue, facial nerve, and muscles in the affected side. HFM often showed progressive facial asymmetry and occlusal plane slanting to the affected side with growth. There were several reports about asymmetry of tooth maturation, hypodontia, delayed eruption, enamel hypoplasia in HFM. Since teeth develope in close association with size and morphology of the maxillary and the mandible, it is highly likely that dental changes will be present in HFM. So the Purpose of this study was to investigate the differences of the primary and the permanent teeth dimensions in the maxillary and the mandibular dentition between the affected and the non-affected side of HFM.. The sample of this study consisted of 34 unilateral HFM Patients (18 males and 16 females, average age : 5 year 11 months old). The authors examined the mesiodistal and the faciolingual dimensions of the primary and the permanent teeth and performed statistical study by using paired t-test. The results were as follows 1. The mesiodistal dimensions of the mandibular second primary molar and the mandibular first permanent molar in the affected side of HFM were significantly smaller than those of non-affected side. But there were no significant differences in the anterior teeth and the mandibular first primary molar. It means that a gradient of severity from anterior teeth to posterior teeth was found in the mandibular dentition. 2. Although there were no significant differences in the faciolingual dimensions of the primary and the permanent teeth in the maxillary and the mandibular dentition between the affected and non-affected side of HFM, there were general trend of compensatory increase in faciolingual dimension of the mandibular primary and the permanent teeth in the affected side Therefore these results showed that HFM might affect on the abnormality of tooth dimension, especially the most posterior teeth, in the affected side of the mandible.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.491-507
• /
• 2000

The purpose of this study was to investigate if there were a significant differences in mandibular position between cephalometric measurements from a centric occlusion tracing compared to those of a acquired centric relation by stabilization splint on malocclusion patient with TMD. 60 malocclusion patients, who had TMD and CO-CR discrepancy beyond normal range, were selected and subdivided into Class I, II, III by Angle's classification and also subdivided into clockwise, straight downward, and counterclockwise group by Jarabak's posterior facial height/anterior facial height ratio. Lateral cephaolmetric radiographs with the mandible in centric occlusion were taken and measured, and for each Patient the stabilization splint with mutually protected occlusal scheme was applied for minimum 3months. After each patient's CO-CR discrepancy was in normal range, lateral cephalometric radiographs were retaken and measured. The comparison of the difference between CO-CR cephalometric measurements in all sample, Class I, II, III groups, and Clockwise, Straight downward, Counterclockwise groups were studied. The finding of this study can be summarized as follows: 1 In all sample, the value of cephalometric measurements was significantly different between CO-CR. The mandible rotated to down and posterior position and the vertical change was greater than the horizontal change (overjet-1.3mm increase, overbite-1.9mm decrease). 2. In Class II malocclusion group, most of the mean difference value between CO-CR is higher than that of the other groups and more measurements was statically significant. 3. In clockwise and counterclockwise group, some of the mean difference value is higher than that of straight downward group and more measurements was statically significant. 4. There ware no measurements that explain centric relation measurements from the type of malocclusion, facial pattern and centric occlusion measurements. Henceforth, it is strongly recommended that stabilization splint therapy for orthodontic treatment on TMD patient should be excuted upon overall facial types prior to orthodontic diagnosis and treatment planning.

• The korean journal of orthodontics
• /
• v.36 no.1 s.114
• /
• pp.74-83
• /
• 2006

Analysis of lateral cephalometric radiograph (cephalogram) has been used routinely to evaluate skeletal and dental relationships, but analysis of the lateral facial photograph has not been used frequently for evaluation of skeletal relationships. As concerns about harm of X-ray irradiation increases, this study was planned to evaluate the possibility of substituting analysis of the lateral cephalogram with analysis of the lateral facial photograph by comparing these two analyses. According to the ANB values from cephalometric analysis, subjects were divided into three groups: Class I malocclusion group (n=32). Class II malocclusion group (n=32), and Class III malocclusion group (n=31). After measurements of angles indicating horizontal and vertical relationships of the maxilla and mandible on the lateral cephalograms and photographs, differences between Class I, II and III groups were evaluated. To evaluate the similarity between two similar values in the cephalograms and photographs, t-test using standardized variable Z and correlation analysis were performed in the Class I malocclusion group. The results showed that 1) SnN'Pg' on the photograph can be used to evaluate the antero-posterior relationship of the maxilla and mandible (ANB), 2) N'-Sn/Sn-Pg' on the photograph can be used to evaluate facial convexity (NA/APg), 3) Sn-Tra-Me' on the photograph can be used as a measurement similar to FMA. In conclusion, partly substituting lateral cephalogram analysis with lateral facial photograph analysis was possible in the evaluation of the maxilla and mandible.

• The korean journal of orthodontics
• /
• v.28 no.4 s.69
• /
• pp.517-531
• /
• 1998

The purpose of this study was to investigate the changes in the craniofacial skeleton subsequent to chincap therapy in the juvenile skeletal Class III malocclusion with more appropriate control samples. The experimental group consisted of 29 Korean children(14 males, 15 females) who had skeletal Class III malocclusion with prognathic mandible and were undergone chincap thorny from the beginning of treatment. The control group was composed of 21 Korean children(10 males, 11 females) who had no orthodontic treatment, but with similar skeletal discrepancies to experimental group. Lateral cephalometric radiographs at the age of 7, and 2 years later were analyized and compared with student's t-test(p<0.05). The results of this study were as follows; 1. The control group without chincap therapy had not shown any improvement of the skeletal discrepancies, but had grown to be much severe. This means that the untreated Class III patient with prognathic mandible would not be corrected by growth. For the experimental group with chincap therapy, the anterior-posterior skeletal discrepancies and mandibular prognathism were both improved. 2. Neither significant restraint nor acceleration of growth was found in the cranial base and maxilla by chincap treatment. 3. The inhibition of mandibular growth could not be accepted, but the changes of the direction of growth and morphological changes were found. 4. Vertical growth tendency was increased with chincap therapy. 5. When Putting together the results of the analyses , it seems to be the rotation and displacement of the mandible that the major treatment effects of chincap we. The changes of the direction of growth and the morphological changes also seems to contibute to the treatment effect partly. In summary, the chincap doesn't restrain the mandibular growth. But, it is considered as a useful treatment modality for correction of skeletal discrepancies and reduction of mandibular prognathism in growing Class III patients with madibular prognathism.