• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.194-206
• /
• 2010

This study was carried out to identify the optimum dyeing conditions for maximum dye uptake of Prunus yedoensis Matsumura flower extract on silk fabric and to investigate hue/tone characteristics and fastness properties of the dyed fabrics. As results, the flower extract was found to contain flavonoids by FT-IR and to show yellowish shade by UV-vis spectrum. Silk fabric was optimized for maximum dye uptake to five repetitions of dyeing at $80^{\circ}C$ for 60 min with an extract concentration of 600% owf in terms of both K/S and color differences. Pre-mordanting was more effective to dye uptake than post-mordanting for all of the mordants used. Un-mordanted and pre-mordanted fabric showed YR(Yellow Red) while most of post-mordanted ones did Y(Yellow). Main tones of dyed fabrics were sf(soft) and lt(light) in the case of unmordanting or Al-mordanting whereas they were d(dull) and g(grayish) by post-mordanting with Cu, Cr, and Fe, respectively. The fastness grades to rub and dry cleaning were reasonably good for most dyeing conditions while those to light were poor. Finally dyeing condition for each hue/tone of the dyed silk with the flower extract was optimized considering fastness properties.

• 패션비즈니스
• /
• 제7권5호
• /
• pp.83-100
• /
• 2003

It has been known that the chitosan pre-treated fabrics can be dyed without the aid of mordanting process. It is due to the fact that chitosan treatment increases the dye uptake. However, the effect of chitosan on the dyeing mechanism has not been elucidated thus far. Following explanations have been presented regrading the action of the chitosan on the dyeing mechanisms: 1. Chitosan absorbs dyestuffs and facilitates dyeing since the chitosan itself has a good affinity toward dyestuffs. 2. Chitosan acts as a metallic mordant between the fiber molecule and dyestuff. 3. Fiber molecules and chitosan form a coordinate covalent bond. This study aims the quantitative investigation on the effect of the chitosan and the effect of sequence of the mordanting, pre-mordanting or post-mordanting, on the dyeing of the fabrics. Cotton fabrics and acylic fabrics were pre-treated with chitosan before dyeing with cochineal dyestuffs. Method 1: Fabrics were, firstly, mordanted with Al, Sn, Cu, and Fe; mordanted fabrics were, secondly, treated with chitosan; mordanted and chitosan-treated fabrics were, thirdly, dyed. Method 2: Fabrics were, firstly, treated with chitosan; chitosan-treated fabrics were, secondly, mordanted with Al, Sn, Cu, and Fe; these were dyed then. Method 2 gave distinguished specific color development with darker shade. Apart from this, chitosan-treated fabrics yielded darker shade compared to the pre-mordanted fabrics without chitosan-treatment.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.393-400
• /
• 2010

This study examines the mordanting effect and multi functional properties of silk fabrics dyed with onion shell extracts that were mordanted with gallnut. The contents of this study are as follows. First, the optimum dyeing conditions were investigated by measuring the K/S value that depended the on dyeing conditions when silk fabrics were dyed with onion shell extracts. Second, the color, brightness, and chroma differences that appear after mordanting with gallnut were investigated by measuring the K/S and Munsell value. Third, the color fastness and antimicrobial activity were measured. When silk fabrics were dyed with onion shell extracts, the optimum dyeing conditions were a dyeing temperature of $70^{\circ}C$, a dyeing concentration of 160%, and a dyeing of time 30min. After mordanting with gallnut extracts, the K/S value increased remarkably and was larger in pre-mordanting than post-mordanting. The H value displayed yellow-red in all cases of pre and post mordanting. However, the H value was more reddish in the order of non-mordanting

• 복식문화연구
• /
• 제19권2호
• /
• pp.324-333
• /
• 2011

This study was accomplished for the purpose of developing a textile processing ingredient that is harmless to the human body and environment. The research method consists of dyeing cotton textiles by extracting the dye solution from ginseng. Then, chrominance, after treatment, antibacterial ratio and deodorization ratio of cotton fabrics dyed with ginseng extracts were tested and results were examined. The research procedure involved first extracting the dye solution from the ginseng's by-product (fine roots) and then dyeing was effectuated differently according to the test samples temperature and dyeing time requirements. Brightness in all dye substances was lower in pre-mordanting. Beige color could be extracted from pre-mordanted samples. And dark orange from postmordanted samples. Color-festness was high in all samples. Most of samples show a big antibacterial ratio and deodorization ratio. Through this research it has been discovered that, when applied to textiles, Korea's ginseng extract possessed reproducibility features as a natural dye and a possibility to be used in cutting which plays a crucial role in hygienic processing. In addition, by using ginseng's by-product for dyeing processing as the dye solution, efficient application of resources and occurrences of no water waste damages were demonstrated and thus, proved to be environmentally-friendly. Specifically, through this experiment, it was found that saponin, ginseng's special characteristics, possessed excellent antibacterial odor repelling functions to clothing as well as the capability to prevent skin disease.

• 패션비즈니스
• /
• 제14권4호
• /
• pp.174-184
• /
• 2010

This research was carried out to find the dyeing properties of Scutellaria baicalensis Georgi on the rayon and cotton fabrics. The best proper dyeing conditions were examined by changing dye concentrations, dyeing temperature, dyeing time, and dyeing repitition. Also dyeability and surface color changes were evaluated by various mordanting methods and agents. The maximum absorption of Scutellaria baicalensis Georgi were at 275nm and 362nm. The optimum dyeing conditions on the cotton were 80%, $80^{\circ}C$, 40minutes, 4 repitition, and those on the rayon were 80%, $80^{\circ}C$, 60minutes, 5 repitition. The K/S values of rayon and cotton fabrics were higher in pre-mordant than post-mordant. The K/S values on the rayons were lower than no mordant fabric except pre-Fe mordant, these on the cotton fabrics were higher than no mordant fabric except post-Al mordant. The value of ${\Delta}E$ was the highest in Fe mordanted fabrics, and higher on the cotton fabric than rayon. The surface colors of all mordanted fabrics were yellow.

• 한국염색가공학회지
• /
• 제32권1호
• /
• pp.1-8
• /
• 2020

The objective was to study the efficiency of Houttuynia cordata extract colorants as eco-friendly and functional dye for wool fabrics. Effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated. Also, antimicrobial activity and deodorization performance were evaluated. The Houttuynia cordata colorants showed good affinity to wool fabrics and produced YR Munsell color. The optimum condition of dyeing was 2.0% of colorants concentration(o.w.b.) at 100℃ for 60 minutes under pH 5.3. Regardless of the mordant type and mordanting method, mordants improved dye uptake and the increase in dye uptake by Fe mordant was higher than that of Al mordant. Al post-mordanting and Fe mordanting changed the color of dyed fabrics with Y Munsell color. The colorfastness of un-mordanted and Al post-mordanted fabrics were excellent above grade 4. Bacteria reduction rate(Staphylococcus aureus) of wool fabrics dyed with Houttuynia cordata colorants was excellent at 98.2%. Also, the deodorization was good at 81%. The results show Houttuynia cordata colorants can be used as a functional natural dye for wool fabrics.

• 한국의류산업학회지
• /
• 제14권5호
• /
• pp.866-877
• /
• 2012

The natural dyeing of hanji cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics in pre-mordanting. The dyeing equilibrium was shown at the fourth time of repeated dyeing. In the processing of hanji cotton fabrics, K/S value was high when hanji cotton fabric was treated with soybean milk at $90^{\circ}C$. Similar K/S value of dyeing was shown when fabrics were processed with chitosan, regardless of dyeing temperature. High K/S value of dyeing was seen when fabrics processed with gallnut tannin at 40. Fabrics dyed with acidic water extract showed yellowish color. Fabrics dyed with alkaline water extract showed reddish color, and fabrics dyed with ethanol extract showed greenish yellow color. In case of Sn-mordanted fabrics, the washing fastness level was between 3 to 4, and other dyed fabrics showed low fastness. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness of the fabrics was better in dry rubbing than in wet rubbing. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. Hanji cotton fabric maintained certain deodorization in the state of raw fabric. All dyed fabrics showed higher UV protection rate than control fabric.

• 대한가정학회지
• /
• 제47권1호
• /
• pp.85-91
• /
• 2009

Dyeability and antimicrobial property of dyed pig skin with Coptis chinensis Franch was investigated. Dyestuff was extracted with water and concentrated. Pig skin was dyed and mordanted according to various dyeing temperature, dyeing time, dyestuff concentration, mordanting methods and kinds of mordants. The results of this experiment were as follows: 1. Dyeability of pig skin with Coptis chinensis Franch was best at 200%(owf) dyestuff concentration, 50${^{\circ}C}$ dyeing temperature, and 20min. dyeing time. 2. Pre-mordanting by Cu improved the K/S values of dyed pig skin. 3. Surface color and color difference of dyed pig skin showed various results according to the mordants used : generally their color was yellow, Al post-mordanted pig skin showed the greatest color difference. 4. Color fastness to drycleaning was considerably high in case of staining compared to fading. Fastness to light was improved by Cu-mordanting while other treatments were not effective. 5. Antimicrobial property of samples was not different (99.9%) between untreated and treated.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.1-9
• /
• 1994

In order to study the effect of mordanting on silk fabrics treated with tannin, those fabrics were treated with Al, Cu, Cr, Fe, Sn by pre and post mordanting. It was studied about color change, weighting effect, dgree of photodegradation by pre and post mordanting. The results are as fallows ; 1. On the addition of mordants into mimosa and tannic acid solution, &{\lambda}_{max}& of the former was slightly blue-shifted, on the other hand, &{\lambda}_{max}& of the latter was obviously Red-shifted. 2. In case of Cu, Cr, Pre mordanting, weighting effect were appeared. Weighting effect of silk fabrics treated with Tannic acid increased higher than mimosa by mordanting. 3. In color change, Silk fabrics treated with Mimosa and Tannic acid generally changed to red direction and fabrics treated with tannic acid changed to yellow direction by pre and post mordanting. 4. In the photodegradation, the degree of photodegradation on mordanted fabrics increased. Its degree was slack in Cu, Cr, Post mordanting. On the other hand, Al, Fe, Sn were greate. Silk fabrics treated with Mimosa and Tannic acid got inhibiting effect on photodegradation.

• 한국의류산업학회지
• /
• 제11권4호
• /
• pp.667-671
• /
• 2009

The use possibility as a dyestuff of Scutellaria baicalensis was investigated. The optimum conditions were evaluated when silk fabrics were dyed by Scutellaria baicalensis extract. The colorants of Scutellaria baicalensis were extracted better in water than methanol. The optical dyeing concentration was 80%(v/v), dyeing temperature was $80^{\circ}C$, dyeing time was 60minites, dyeing repetition was 2 turns. A Post-mordant method showed higher K/S value than premordant one, especially post-Fe appeared the highest value and post-Cr was second. Surface color was all Y. The color fastness was very good at the second repetition of no mordanted silk fabrics, all mordant fabrics were not improved the colorfastness. The antibacterial activity showed at Staphylococcus aureus tested specimen that bacterial reduction rate was 99.7%.