• Journal of Digital Convergence
• /
• v.19 no.4
• /
• pp.159-166
• /
• 2021

This study was an attempt to develop a multidrug resistant organisms infection control simulation program for nurses at small and medium sized hospitals and to evaluate the effectiveness of said simulation program. This is a single-group, pre-post experimental design study conducted on 33 nurses working at small and medium sized hospitals. Data obtained were analyzed using the IBM SPSS 21.0 program, along with the use of descriptive statistics and paired t-test. Regarding the results of the study, multdrug resistant organisms infecion control knowledge(t=-10.764, p<.001)and performance levels(t=-4.215, p<.001) of the nurses displayed statistically significant increases following application of the simulation program. There is a need for the development of more diversified simulation programs in the future since the improvement in the infection control knowledge and performance levels of nurses is important to block the spread of multidrug resistant organisms and prevent infection outbreak thereof with medical institutions.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.32 no.2
• /
• pp.87-93
• /
• 2021

There are a number of voice analysis programs around the world. Domestic voice analysis is performed by relying heavily on specific commercial program. We intend to develop coding for voice analysis using Praat and apply it to clinical practice. This study consisted of Experiment 1 and Experiment 2. Experiment 1 was the development of automated voice analysis coding based on Praat. The coding was largely divided into a recording, an analysis, and a storage section. Experiment 2 was applied to the voice analysis of 2 male patients pre- and post-operation with this coding. The analysis parameters of this coding provided 26 parameters for vowel /a/, nine parameters for sentence analysis, and a total of 4 parameters for voice range profile analysis. In two male patients, the pitch and the intensity increased, the voice quality improved, and the sentence length decreased after surgery. The coding was well made, so the output was good in real time. The code is automated as much as possible to block manual errors and increases convenience and efficiency by generating the result sheet in real time.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.1-13
• /
• 2021

With the global pandemic of COVID-19, it is pointed out that exposure to false information to the public could cause serious problems. However, in pandemic situations, there is also an positive effect for the public to share private-led information rather than centralized unilateral delivery of information. This study analyzes the role of private-led information provision in infectious disease situations. To this end, topic modeling and sentiment analysis is carried out on online reviews of all COVID-19-related applications in Google Playstore provided by the Korean government and the private. The results showed that the user's evaluation of private apps, which were used from the early stage of COVID-19, was much higher than the apps provided by the government. In particular, users responded more positively to private apps than government apps in all aspects such as reliability of information, risk avoidance, timeliness, usefulness, and stability. Based on these results, a post-monitoring system is recommended rather than a pre-block of all private apps.

• Journal of Industrial Convergence
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2023

In the fintech environment, Smart phones are mainly used for various service. User authentication technology is required to use safe services. Authentication is performed by transmitting authentication information to the server when the PIN or password is entered and touch the button completing authentication. But A post-attack is possible because the smudge which is the trace of using screen remains instead of recording attack with a camera or SSA(Shoulder Surfing Attack). To prevent smudge attacks, users must erase their fingerprints after authentication. In this study, we proposed a technique to determine whether to erase fingerprints. The proposed method performed erasing fingerprint which is the trace of touching after entering PIN and designed the security keypads that processes instead of entering completion button automatically when determined whether the fingerprint has been erased or not. This method suggests action that must erase the fingerprint when entering password. By this method, A user must erase the fingerprint to complete service request and can block smudge attack.

• Restorative Dentistry and Endodontics
• /
• v.48 no.1
• /
• pp.1.1-1.11
• /
• 2023

Objectives: This study evaluated the dentinal penetration depth of 2.5% sodium hypochlorite (NaOCl) in root canals with and without preparation and different irrigant activation protocols. Materials and Methods: Sixty-three bovine mandibular incisors were randomly allocated to 6 groups (n = 10): G1, preparation + conventional needle irrigation (CNI); G2, preparation + passive ultrasonic irrigation (PUI); G3, preparation + Odous Clean (OC); G4, no preparation + CNI; G5, no preparation + PUI; G6, no preparation + OC; and CG (negative control; n = 3). Samples were filled with crystal violet for 72 hours. Irrigant activation was performed. Samples were sectioned perpendicularly along the long axis, 3 mm and 7 mm from the apex. Images of the root thirds of each block were captured with a stereomicroscope and analyzed with an image analysis software. One-way analysis of variance, followed by the Tukey post hoc test, and the Student's t-test were used for data analysis, with a significance level of 5%. Results: The NaOCl penetration depth was similar when preparation was performed, regardless of the method of irrigation activation (p > 0.05). In the groups without preparation, G6 showed greater NaOCl penetration depth (p < 0.05). The groups without preparation had a greater NaOCl penetration depth than those with preparation (p = 0.0019). Conclusions: The NaOCl penetration depth was similar in groups with root canal preparation. Without root canal preparation, OC allowed deeper NaOCl penetration. The groups without preparation had greater NaOCl penetration than those undergoing root canal preparation.

• 한국정보교육학회:학술대회논문집
• /
• 2021.08a
• /
• pp.77-84
• /
• 2021

The purpose of this study is to propose AI maker coding education as a way to improve computational thinking(CT), which is an essential competence for problem-solving capability in modern society, and to analyze the effectiveness of this education on improving CT in elementary school students. For the research, 5 students from 4th graders and 5 students from 6th graders were recruited, and AI maker coding education was planned in 8 sessions to form classes from basic block coding and maker education to real-life problem solving. To analyze the effectiveness of AI maker coding education, pre- and post-CT examinations were performed. The test results confirmed that AI maker coding education had a significant effect on "abstraction", "algorithm", and "data processing" in the five CT components, and confirmed that there was no correlation in "problem resolution" and "automation". Overall, the average score of all students increased, and the deviation between students decreased, confirming that AI maker coding education was effective in improving CT.

• Journal of Biomedical Engineering Research
• /
• v.45 no.1
• /
• pp.26-36
• /
• 2024

Functional brain imaging techniques have been used to diagnose psychiatric disorders such as dementia, depression, and autism. Recently, these techniques have also been actively used to study hearing loss. The present study reviewed the application of the functional brain imaging techniques in auditory research, especially those focusing on hearing loss, over the past decade. EEG, fMRI, fNIRS, MEG, and PET have been utilized in auditory research, and the number of research studies using these techniques has been increasing. In particular, fMRI and EEG were the most frequently used technique in auditory research. EEG studies mostly used event-related designs to analyze the direct relationship between stimulus and the related response, and in fMRI studies, resting-state functional connectivity and block designs were utilized to analyze alterations in brain functionality in hearing-related areas. In terms of age, while studies involving children mainly focused on congenital and pre- and post-lingual hearing loss to analyze developmental characteristics with and without hearing loss, those involving adults focused on age-related hearing loss to investigate changes in the characteristics of the brain based on the presence of hearing loss and the use of a hearing device. Overall, ranging from EEG to PET, various functional brain imaging techniques have been used in auditory research, but it is difficult to perform a comprehensive analysis due to the lack of consistency in experimental designs, analysis methods, and participant characteristics. Thus, it is necessary to develop standardized research protocols to obtain high-quality clinical and research evidence.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.2
• /
• pp.59-87
• /
• 2012

Recent studies reveal that eclogite formed in the Hongseong area and post collision igneous rocks occurred throughout the Gyeonggi Massif during the Triassic Songrim Orogeny. These new findings derive the tectonic model in which the Triassic Qinling-Dabie-Sulu collision belt between the North and South China blocks extends into the Hongseong-Yangpyeong-Odesan collision belt in Korea. The belt may be further extended into the late Paleozoic subduction complex in the Yanji belt in North Korea through the Paleozoic subduction complex in the inner part of SW Japan. The collision belt divides the Gyeonggi Massif into two parts; the northern and southern parts can be correlated to the North and South China blocks, respectively. The collision had started from Korea at ca. 250 Ma and propagated to China. The collision completed during late Triassic. The metamorphic conditions systematically change along the collision belt:. ultrahigh temperature metamorphism occurred in the Odesan area at 245-230Ma, high-pressure metamorphism in the Hongseong area at 230 Ma and ultra high-pressure metamorphism in the Dabie and Sulu belts. This systematic change may be due to the increase in the depth of slab break-off towards west, which might be related to the increase of the amounts of subducted ocecnic slab towards west. The wide distribution of Permo-Triassic arc-related granitoids in the Yeongnam Massif and in the southern part of the South China block indicate the Permo-Triassic subduction along the southern boundary of the South China block which may be caused by the Permo-Triassic collision between the North and South China blocks. These studies suggest that the Songrim orogeny constructed the Korean Peninsula by continent collision and caused the subduction along the southern margin of the Yeongnam Massif. Both the northern and southern Gyeonggi Massifs had undergone 1870-1840 Ma igneous and metamorphic activities due to continent collision and subduction related to the amalgamation of Colombia Supercontinent. The Okcheon metamorphic belt can be correlated to the Nanhua rift formed at 760 Ma within the South China blocks. In that case, the southern Gyeonggi Massif and Yeongnam Massif can be correlated to the Yangtz and Cathaysia blocks in the South China block, respectively. Recently possible Devonian or late Paleozoic sediments are recognized within the Gyeonggi Massif by finding of Silurian and Devonian detrital zircons. Together with the Devonian metamorphism in the Hongseong and Kwangcheon areas, the possible middle Paleozoic sediments indicate an active tectonic activity within the Gyeonggi Massif during middle Paleozoic before the Permo-Triassic collision.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.183-195
• /
• 2020

Purpose: The purpose of this study is to compare the flexural strength of CAD/CAM denture base resins with conventional denture base resins based on their thicknesses. Materials and Methods: For the conventional denture base resins, Lucitone 199^® (C-LC) was used. DIOnavi - Denture (P-DO) and DENTCA Denture Base II (P-DC) were taken for the 3D printing denture base resins. For the prepolymerized PMMA resins, Vipi Block Gum (M-VP) and M-IVoBase^® CAD (M-IV) were used. The final dimensions of the specimens were 65.0 mm x 12.7 mm x 1.6 mm / 2.0 mm / 2.5 mm. The 3-point bend test was implemented to measure the flexural strength and flexural modulus. Microscopic evaluation of surface of fractured specimen was conducted by using a scanning electron microscope (SEM). After testing the normality of the data, one-way ANOVA was adopted to evaluate the differences among sample groups with a significance level of P = 0.05. The Tukey HSD test was performed for post hoc analysis. Results: Under the same thicknesses, there are significant differences in flexural strength between CAD/CAM denture base resins and conventional denture base resins except for P-DO and C-LC. M-VP showed higher flexural strength than conventional denture base resins, P-DC and M-IV displayed lower flexural strength than conventional denture base resins. Flexural modulus was highest in M-VP, followed by C-LC, P-DO, P-DC, M-IV, significant differences were found between all materials. In the comparison of flexural strength according to thickness, flexural strength of 2.5 mm was significantly higher than that of 1.6 mm in C-LC. Flexural strength of 2.5 mm and 2.0 mm was significantly higher than that of 1.6 mm in P-DC and M-VP. In M-IV, as the thickness increases, significant increase in flexural strength appeared. SEM analysis illustrates different fracture surfaces of the specimens. Conclusion: The flexural strength of different CAD/CAM denture base resins used in this study varied according to the composition and properties of each material. The flexural strength of CAD/CAM denture base resins was higher than the standard suggested by ISO 20795-1:2013 at a thickness of 1.6 mm or more though the thickness decreased. However, for clinical use of dentures with lower thickness, further researches should be done regarding other properties at lower thickness of denture base resins.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.3
• /
• pp.189-197
• /
• 2023

Purpose. This study aimed to compare and evaluate the shear bond strength between various temporary prostheses resin blocks fabricated by subtractive and additive manufacturing methods bonded to self-curing reline resin. Materials and methods. The experimental groups were divided into 4 groups according to the manufacturing methods of the resin block specimens and each specimen was fabricated by subtractive manufacturing (SM), additive manufacturing stereolithography apparatus manufacturing (AMS), additive manufacturing digital light processing manufacturing (AMD) and conventional self-curing (CON). To bond the resin block specimens and self-curing resin, the reline resin was injected and polymerized into the same location of each resin block using a silicone mold. The shear bond strength was measured using a universal testing machine, and the surface of the adhesive interface was examined by scanning electron microscopy. To compare between groups, one-way ANOVA was done followed by Tukey post hoc test (α = 0.05). Results. The shear bond strength showed higher values in the order of CON, SM, AMS, and AMD group. There were significant differences between CON and AMS groups, as well as between CON and AMD groups. but there were no significant differences between CON and SM groups (P > .05). There were significant differences between SM and AMD groups, but there were no significant differences between SM and AMS groups. The AMS group was significantly different from the AMD group (P < .001). The most frequent failure mode was mixed failures in CON and AMS groups, and adhesive failures in SM and AMD groups. Conclusion. The shear bond strength of SM group showed lower but not significant bond strength compared to the CON group. The additive manufacturing method groups (AMS and AMD) showed significantly lower bond strength than the CON group, with the AMD group the lowest. There was also a significant difference between the AMD and SM group.