• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.2
• /
• pp.21-27
• /
• 2020

Purpose : The purpose of this paper is to compare the immediate effects of tensor fascia latae (TFL) stretching with weight bearing (standing position) or non-weight bearing (side-lying position). Methods : The study was conducted on 30 adults (12 men, 18 women) in their 20s. Modified Thomas's test was conducted to find out if the TFL muscle has a tightness for current study. This study randomly divided the subjects into two groups and set the standing stretching group (n=15) or the side-lying stretching group (n=15). Both groups applied self-stretching under the therapist's supervision. TFL stretching in each positions was performed 30 seconds per set, 3 times, and 30 seconds per set could rest. The Ober test were conducted to investigate the effect of TFL stretching in each positions. Results : For the Ober test measurements within each group, both groups significantly increased after intervention compared to before (p<.05). There was no significant difference between the groups (p>.05). Conclusion : TFL stretching in standing position and side-lying position increased the range of motion of the TFL muscle. Therefore, if it is difficult to apply TFL stretching in standing position (weight bearing) due to pain or other reasons, it will be able to TFL stretching in side-lying position (non-weight bearing).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.1
• /
• pp.13-24
• /
• 1988

The determination of three-dimensional positions on a circular or cylindrical surface covers a variety of applications. As an example, consider the monitoring of structures, which is an important topic in the broad category of deformation analysis. The use of convergent photography in determination of these positions has the many advantages over survey based procedures. This paper illustrates results from bundle adjustments derived from convergent photography of a cylindrical object, with both metric and non-metric cameras utilized in the test. In addition to standard error comparisons resulting from the error analysis provided by the bundle adjustments, object space coordinates resulting from metric and non-metric camera network geometries will also be compared.

• Fire Science and Engineering
• /
• v.25 no.4
• /
• pp.94-102
• /
• 2011

Hot smoke test is done in a subway tunnel. Alcohol trays of 1.0 MW and smoke generators are used for generating hot smoke. The fans equipped with the tunnel are successively run 9 min after smoke generation. It is verified how hot smoke is controlled by fans. Velocity and direction of flow, temperature and smoke density are measured and analyzed for smoke control performance of the tunnel with fans and analyzed from the fire-safety-point of view. Velocity of smoke flow is obtained by using measured velocity and temperature at the ceiling of the tunnel. The time when smoke-control flow is builded up is different for the different positions. Velocity distributions at various positions will be used for the boundaries and the comparison data in numerical simulations for evaluation on smoke-control facilities of subway tunnel.

• The Journal of Korean Physical Therapy
• /
• v.24 no.1
• /
• pp.29-34
• /
• 2012

Purpose: The purpose of this study was to evaluate the difference between respiratory function and speech production, according to the seat surface inclination while in the sitting position. Methods: Respiratory function (FVC, FEV1) and speech production (inspiratory frequency, unit reading time, paragraph reading time) were measured in 3 sitting conditions: horizontal seat surface, seat surface tilted forward 15 degrees, and seat surface tilted backward 15 degrees. Results: We found that the mean values of FVC and FEV1 were statistically significant different according to three types of sitting positions (p<0.05). The following result was observed: forward tilted sitting > horizontal sitting > backward tilted sitting. There was no significant difference in speech production between the different positions. Respiratory function and speech production had a significantly negative correlation in the forward tilted condition and the backward tilted condition. Conclusion: This finding suggests that the seat surface inclination have an effect on respiratory function. Especially, forward tilted sitting may be an effective posture that may help increases the respiratory function.

• The Journal of Korean Physical Therapy
• /
• v.21 no.2
• /
• pp.71-77
• /
• 2009

Purpose: This study assessed the differences in the forward head posture (FHP), cervical range of motion, and headache clinical parameters in episodic tension-type headache (ETTH) subjects, chronic tension-type headache (CTTH) subjects, and healthy controls (university students). Methods: Fifteen CTTH subjects, 15 ETTH subjects and 15 controls without headache were examined. Side-view images of each group were taken in both the sitting and standing positions, in order to assess the FHP by measuring the craniovertebral angle. The CROM was used to measure the cervical range of motion. A headache diary was kept for 4 weeks to assess the headache intensity, frequency, and duration. Results: The craniovertebral angle was smaller, ie, there was a greater FHP, in the CTTH and ETTH subjects than in the healthy controls in both the sitting and standing positions (p<0.05). The CTTH and ETTH subjects showed a lower cervical range of motion than the healthy controls in the total range of motion as well as in the half-cycles (p<0.05). Conclusion: The increased FHP and decreased cervical range of motion might be a contributing factor in the initiation of tension-type headache.

• The Journal of Korean Physical Therapy
• /
• v.32 no.4
• /
• pp.217-221
• /
• 2020

Purpose: This study examined the immediate effect of Kegel exercise on the vital capacity according to the position. Methods: Seventeen subjects participated in the study (male=7, female=10). The subjects performed Kegel exercise in two positions: sitting and hooklying. The order of exercise was conducted in a random order selected by the subjects to exclude the learning effect. The maximum voluntary ventilation (MVV) was measured using a spirometer. The vital capacity was measured according to the manual in the sitting position before the experiment. After each exercise, the vital capacity was also measured in the same way. One way repeated measures analysis of the variance (ANOVA) was used to compare the vital capacity according to the position, and a Bonferroni test was used for post hoc analysis. Results: Significant differences in vital capacity were observed after exercise than before exercise (p<0.05). Post-hoc analysis, however, revealed no difference in vital capacity according to the position (p>0.05). Conclusion: This study was a preliminary study to determine the vital capacity according to the Kegel exercise and two positions. Nevertheless, further study with several revisions of the number of subjects, duration, and time for intervention will be needed.

• Proceedings of the KWS Conference
• /
• 2007.11a
• /
• pp.36-38
• /
• 2007

The instability of the arc in the $CO_2$ arc welding affects the quality of the weld in the automotive industry. This paper evaluates the effects of the arc stability in $CO_2$ arc welding with respect to vertical welding positions. In this experiment, galva-annealed steel sheets(CA) were used as specimens, and these materials were welded by adopting new Cold Metal Transfer (CMT) process. For each sample, fillet joint welding trials were carried out using the same conditions. Each part of welding joints was welded with vertical-up, vertical-down position at $45^{\circ},\;90^{\circ}\;and\;135^{\circ}$ degrees. A high speed camera and a welding signal monitoring system were used for monitoring fluid-flow phenomena in weld pools and frequency measurements, respectively. Through this study, the welding position were found to be key factors mainly to influence the arc stability in $CO_2$ welding moreover and that the arc stability in the vertical-up welding position was observed to be more stable than the vertical-down welding position below $90^{\circ}$.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.1 s.16
• /
• pp.17-25
• /
• 2006

TPR*-tree is the most widely-used index structure for effectively predicting the future positions of moving objects. The TPR*-tree, however, has the problem that both of the dead space in a bounding region and the overlap among hounding legions become larger as the prediction time in the future gets farther. This makes more nodes within the TPR*-tree accessed in query processing time, which incurs the performance degradation. In this paper, we examine the performance problem quantitatively with a series of experiments. First, we show how the performance deteriorates as a prediction time gets farther, and also show how the updates of positions of moving objects alleviates this problem. Our contribution would help provide Important clues to devise strategies improving the performance of TPR*-trees further.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.3
• /
• pp.53-62
• /
• 2009

This study was carried out to select optimal probability distribution based on design accumulated monthly mean inflow from the viewpoint of drought by Gamma (GAM), Generalized extreme value (GEV), Generalized logistic (GLO), Generalized normal (GNO), Generalized pareto (GPA), Gumbel (GUM), Normal (NOR), Pearson type 3 (PT3), Wakeby (WAK) and Kappa (KAP) distributions for the observed accumulative monthly mean inflow of Chungjudam. L-moment ratio was calculated using observed accumulative monthly mean inflow. Parameters of 10 probability distributions were estimated by the method of L-moments with the observed accumulated monthly mean inflow. Design accumulated monthly mean inflows obtained by the method of L-moments using different methods for plotting positions formulas in the 10 probability distributions were compared by relative mean error (RME) and relative absolute error (RAE) respectively. It has shown that the design accumulative monthly mean inflow derived by the method of L-moments using Weibull plotting position formula in WAK and KAP distributions were much closer to those of the observed accumulative monthly mean inflow in comparison with those obtained by the method of L-moment with the different formulas for plotting positions in other distributions from the viewpoint of RME and RAE.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.12a
• /
• pp.113-116
• /
• 2004

Assisted by high technologies of information and communication in storing and collecting moving object information, many applications have been developing technical methods to exploit databases of moving objects effectively and variously. Among them, today, Current and Anticipated Future Position Indexing methods manage current positions of moving objects in order to anticipate future positions of them or more complex future queries. They, however, strongly demand update performance as fast enough to guarantee certainty of queries as possible. In this paper, we propose a new indexing mettled derived from the TPR-tree that should has update performance considerably improved, we named it BUR-tree. In our method, index structure can be inserted, deleted, and updated with a number (or bulk) of objects simultaneously rather than one object at a time as in conventional methods. This method is intended to be applied to a traffic network in which vast number of objects, such as cars, pedestrians, moves continuously.