• Radiation Oncology Journal
• /
• v.20 no.3
• /
• pp.283-293
• /
• 2002

Purpose : A PC based brachytherapy planning system was developed to display dose distributions on simulation images by 2D isodose curve including the dose profiles, dose-volume histogram and 30 dose distributions. Materials and Methods : Brachytherapy dose planning software was developed especially for the Ir-192 source, which had been developed by KAERI as a substitute for the Co-60 source. The dose computation was achieved by searching for a pre-computed dose matrix which was tabulated as a function of radial and axial distance from a source. In the computation process, the effects of the tissue scattering correction factor and anisotropic dose distributions were included. The computed dose distributions were displayed in 2D film image including the profile dose, 3D isodose curves with wire frame forms and dosevolume histogram. Results : The brachytherapy dose plan was initiated by obtaining source positions on the principal plane of the source axis. The dose distributions in tissue were computed on a $200\times200\;(mm^2)$ plane on which the source axis was located at the center of the plane. The point doses along the longitudinal axis of the source were $4.5\~9.0\%$ smaller than those on the radial axis of the plane, due to the anisotropy created by the cylindrical shape of the source. When compared to manual calculation, the point doses showed $1\~5\%$ discrepancies from the benchmarking plan. The 2D dose distributions of different planes were matched to the same administered isodose level in order to analyze the shape of the optimized dose level. The accumulated dose-volume histogram, displayed as a function of the percentage volume of administered minimum dose level, was used to guide the volume analysis. Conclusion : This study evaluated the developed computerized dose planning system of brachytherapy. The dose distribution was displayed on the coronal, sagittal and axial planes with the dose histogram. The accumulated DVH and 3D dose distributions provided by the developed system may be useful tools for dose analysis in comparison with orthogonal dose planning.

• Horticultural Science & Technology
• /
• v.28 no.3
• /
• pp.456-461
• /
• 2010

A study was conducted to investigate the effect of topophysis, and uniting method of rootstock and scion on rooting and subsequent growth of stenting-propagated cut rose ($Rosa$ $hybrida$ Hort.) in an effort to develop an efficient stenting propagation method for domestic rose cultivars. Four cultivars used in this study were two standard type cultivars 'Sweet Yellow' and 'Hanmaum', and two spray type cultivars 'Chelsi' and 'May'. Scions were grafted on cuttings of a rootstock $Rosa$ $indica$ 'Major'. The stenting-propagated scion-rootstock unions were planted in rockwool cubes ($50{\times}50{\times}50mm$, Delta, Grodan, Denmark) and were placed in a graft-take chamber for five days before being placed on misted greenhouse beds. The rootstock was removed of all leaves and nodes. Both the base of scions and top of stocks were simultaneously cut at a $45^{\circ}$ angle for grafting. Scions were prepared as single node cuttings, each with a five-leaflet leaf. Three positions of topophysis used were 7-9th (top), 4-6th (middle), and 1st-3rd (bottom) nodes from the stem base. Four uniting materials used were tube, tube + parafilm wrap, tube + clothespin, and clothespin. Rooting and growth were affected by the topophysis and cultivar. The best topophysis for rooting was 7-9th (top) nodes in all cultivars. Topophysis affected percent rooting, and number of roots, length of the longest root, and but not weight, shoot length and graft-take. Rooting and growth were affected by the uniting method and cultivar. Tube uniting method generally showed higher percentage graft-take, percent rooting, and number of roots than other methods. However, rootstock and scion union was not complete in this treatment. On the whole, the greatest rooting and subsequent growth of stenting-propagated plants were found in the tube + clothespin method. Except 'Sweet Yellow', rooting and growth were not adequate in the clothespin method. The results suggested that a tube + clothespin method was the most effective, and this method may be used as a substitute to save labor compared to a tube + parafilm wrap method which is currently being used in commercial nurseries.

• Journal of Distribution Science
• /
• v.8 no.1
• /
• pp.21-33
• /
• 2010

The ICT(information & communication technology) led to a dramatic change of floral distribution service, a phase of competition between wholesales and retail stores, and distribution channels in floral industry. It was expected that a role of the intermediaries in this industry would have reduced due to the improvement of transaction process by ICT. However, the ICT made to overcome a regional limit of the floral retail distribution service leading to an increase in sales and enlargement of the stores. And even it made possible to bring out another type of intermediaries such as private associations. This case study focuses on what kinds of efforts the floral wholesale distributors have made to enable a distribution process more smoothly between the wholesale distributors and retail stores through the information system, and what the failure factors in adopting the information system have been. This paper is also to examine how the wholesale distributors have changed themselves to gain dominant positions in distribution channels. As a result of the study, it was found that the intermediaries mostly failed in successfully achieving the distribution channel innovation through the information system because of several main reasons. FLOMARKET Inc. tried to innovate a distribution channel to obtain high quality goods through consolidating a wholesale distribution market in that segregated both floral joint market from free markets. after implementing the information system with consideration of the failure factors, FLOMARKET Inc. was able to minimize goods in stock and make a major purchase of various goods. In addition, it made a possible pre-ordering process and an exact calculation of purchasing goods so they could provide their products with market price in real time, which helped for the company to gain credits from their customers. Also, FLOMARKET Inc. established the information system which well suited to its business stage in order to deal with a rapidly changing distribution environment. It's so obvious that the transaction processing system of FLOMARKET Inc. definitely helped to share information among traders more seamlessly and smoothly in realtime, standardize goods, and make a transaction process clearer. Besides, the transaction information helped the wholesale distributors and retail stores to make more strategic decisions in their business because through the system they enabled to gather the marketing intelligence information more easily and convenient. If we understand that the floral distribution market is characterized by the low IT- based industry, it's worth to examine a case study proving that the information system actually increases the productivity of the transaction process in the floral industry.

• Journal of Korean Philosophical Society
• /
• v.129
• /
• pp.23-51
• /
• 2014

Christine M. Korsgaard believes that constructivism can respond to moral skepticism without depending upon moral realism. The purpose of this paper is to examine Korsgaard's kantian constructivism and her positions on moral realism. According to Korsgaard moral realism cannot answer normative questions in that it sees the function of moral concepts as describing the reality and so accepts the model of applied knowledge for action. In contrast Korsgaard insists that constructivism is better at justifying normativity since it regards moral concepts as representing the solutions to practical problems and so shows that moral principles are necessarily involved in the practical problems of agency. Korsgaard's constructivism has antirealistic elements such as pure proceduralism, the constitutive model to exclude ontological, metaphysical meanings, and the account of human beings as the sources of values. In spite of those antirealistic elements it is difficult to jump to a conclusion that Korsgaard's constructivism is antirealism. Korsgaard, in the early book, The Sources of Normativity, says that kantian constructivism has something to do with a form of realism, or procedural moral realism. And in the following books she argues that constructivism is compatible with realism although she pays attention to the practical implications of constructivism and then sets aside its ontological relevance. That is, Korsgaard does not want that her constructivism results in antirealism. Korsgaard's realism, however, is too weak to be called as realism. There is, also, a question why one would rather take a constructivist approach if one holds on to realism.

• Journal of Legislation Research
• /
• no.44
• /
• pp.571-610
• /
• 2013

The current patent system is more often used for defensive purposes to exclude others' use or as a means to hold unfair strong positions in negotiations rather than for the original purpose as the dissemination and active use of useful technology. An injunction together with a damage is an important remedy for patent infringements. However, unlike a claim for damages, injunctions do not require the subjective requirement of intent and negligence or the occurrence of loss. If the validity of the patent and the fact of infringement are confirmed, automatically injunctions are issued without consideration of other circumstances. So a patent holder would exclude others' use and have a powerful position in negotiations because of injunctions for patent infringements. Therefore, those injunctions for patent infringements should be flexibly restricted according to cases under the premise to ensure fair compensation for the patent owner, rather than absolutely admitting injunctions for patent infringements like now. If then, it would serve the use of a useful technology and industrial development as the purpose of the patent system. First of all, judgments for preliminary injunctions should be strict and by deliberate decision on the merits permanent injunctions should be determined. In addition, it is needed that court's discretion possible to considerate 'the need for an injunction'. When the courts judge 'the need for an injunction', 'whether a patent holder has implemented a patent invention, the possibility of monetary compensation and the ability of the infringer for damages, a patent holder's intent to license and whether an injunction has been used as a weapon of negotiation, the proportion of patent technology in the entire products, the characteristics of patent technology and the possibility of patent invalidity, the competitive relationship for market share, the public interests and gains and losses between the parties and so on' should be considered. After these judgements, if 'the need for an injunction' is not approved, a patent owner would be protected by post-monetary compensation. However, because damages are related to illegal conducts in the past, in the case that an injunction is restrained, measures to ensure the legal implementation in the future are needed. It is primarily desirable that reasonable royalty is estimated throughout private negotiations between parties, but if agreement between the parties does not occur, patent owner should be able to claim the royalty for future.

• Journal of Christian Education in Korea
• /
• v.67
• /
• pp.45-75
• /
• 2021

The purpose of this study is to explore a new paradigm for Bible didactics in the context of the contemporary times and it turns its gaze to the midrash, the old tradition of Hebrew Bible interpretation. In order for the current Bible study to be meaningful and effective in today's situation, it is an effort to connect the Bible and us well, more than educational contents or materials. The word "midrash" itself means "textual interpretation", or "study", derived from the root verb darash, which means "to seek," "to seek with care," "to enquire," "to require" forms of which appear frequently in the Hebrew Bible. Midrash means an exegesis and interpretation of the Hebrew Bible (Torah) as well as a group of works that are the result of specific interpretations of the rabbis. This rabbinical tradition provides specific interpretative guidelines dealing with the Bible. These interpretive guidelines were passed down and formed an attitude of interpreting the Bible that is still relevant today. The rabbinical interpretative guidelines in midrash lead to the discovery of the following biblical didactical meanings. First, the Bible requires an attitude of listening and learning. Second, an attitude of inquiry is needed. Third, an exploration through the empty space is essential. Fourth, it leads us to recognize the importance of mutual respect and communication. Fifth, through the Words that challenge me, the meaning of biblical teaching is discovered. These interpretation guidelines have much in common with Bibliodrama, which applies midrash to the didactic of Bible. Bibliodrama is a dramatic inquiry, where the effect of in-depth inquiry and consideration that midrash aimed at can be expected. In addition, bibliodrama is a process of communal interaction that leads to a new experience and a richer understanding of the Bible through different positions and viewpoints. Exploring the "white fire" of the Bible, we listen to what God says to us, which causes us to change and form an identity. The biblical didactical meaning found in midrash's interpretation guidelines and the biblical didactical application of midrash through the bibliodrama can be presented as a new alternative to Christian education for the past, the present and the future. This will be able to present a new paradigm for biblical didactics with the word of God living and working in the present, not the Bible of the past, which is far from our present life.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.4
• /
• pp.85-99
• /
• 2021

Due to the continuous unemployment problem, the number of jobs is gradually decreasing, and entrepreneurship is emerging as an alternative. This is because, despite the government operating various start-up support programs to build a start-up-friendly culture, young entrepreneurs cannot endure the valley of death and disappear. Therefore, through this study, we intend to provide implications by analyzing the impact on Entrepreneurial satisfaction, which is essential for continuously running a business, and life satisfaction, which can act as a social awareness. This study was conducted with 573 non-wage workers who belonged to the founders among the participants of the 'College Graduation Occupational Migration Path Survey(GOMS)' survey provided by the Korea Employment Information Service. In order to analyze the relationship between entrepreneurial competency and job fit, Entrepreneurial satisfaction, and life satisfaction, the analysis was conducted using the SPSS 23.0 program. The main research results are summarized as follows. First, entrepreneurial competency has a positive effect on Entrepreneurial satisfaction and life satisfaction. Second, job fit indicates a moderating role in the relationship between entrepreneurial competency and Entrepreneurial satisfaction. Third, start-up satisfaction appears to have a partial mediating role in the relationship between entrepreneurial competency and life satisfaction. Fourth, as a result of analyzing the difference between groups according to the type of start-up(single/partnership), the group that worked together showed higher Entrepreneurial satisfaction and life satisfaction. The main implications of this study are: First, in order to increase the Entrepreneurial satisfaction and life satisfaction of university graduates who are the subject of the study, it will be necessary to design a program that can diagnose and enhance the entrepreneurial competency of students at the university level. Second, entrepreneurial competency is a basic intrinsic factor that founders must have, and it should act as an important evaluation factor when selecting founders for support programs from start-up support organizations as well as founders. Third, it is necessary to maintain mutual trust by documenting problems (positions, wages, management rights, distribution of profits, etc.) that may occur in joint ventures with objective data. Fourth, it is necessary to establish an environment in which the MZ generation, armed with the challenging spirit and creativity, can continue to take on challenges even if they fail.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.594-604
• /
• 2021

To evaluate the causes of beach erosion in Sinji-Myeongsasimni Beach, external forces, such as tides, tidal currents, and waves, were observed seasonally from March 2019 to March 2020, and the surface sediments were analyzed for this period. In addition, the shoreline positions and beach elevations were regularly surveyed with a VRS GPS and fixed-wing drone. From these field data, the speed of the tidal currents was noted to be insufficient, but the waves were observed to af ect the deformation of the beach. As the beach is open to the southern direction, waves of heights over 1 m were received in the S-SE direction during the spring, summer, and fall seasons. Large waves with heights over 2 m were observed during typhoons in summer and fall. Because of the absence of typhoons for the previous two years from July 2018, the beach area over datum level (DL) as of July 2018 was greater by 30,138m² compared with that of March 2019, and the beach area as of March 2020 decreased by 61,210m² compared with that of March 2019 because of four typhoon attacks after July 2018. The beach volume as of March 2019 decreased by 5.4% compared with that of July 2018 owing to two typhoons, and the beach volume as of September 2019 decreased by 7.3% because of two typhoons during the observation year. However, the volume recovered slightly by about 3% during fall and winter, when there were no high waves. According to the sediment transport vectors by GSTA, the sediments were weakly influxed from small streams located at the center of the beach; the movement vectors were not noticeable at the west beach site, but the westward sediment transport under the water and seaward vectors from the foreshore beach were prominently observed at the east beach site. These patterns of westward sediment vectors could be explained by the angle between the annual mean incident wave direction and beach opening direction. This angle was inclined 24° counterclockwise with the west-east direction. Therefore, the westward wave-induced currents developed strongly during the large-wave seasons. Hence, the sand content is high in the west-side beach but the east-side beach has been eroded seriously, where the pebbles are exposed and sand dune has decreased because of the lack of sand sources except for the soiled dunes. Therefore, it is proposed that efforts for creating new sediment sources, such as beach nourishment and reducing wave heights via submerged breakwaters, be undertaken for the eastside of the beach.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.157-167
• /
• 2021

Lead (Pb) is one of the key trace elements, exhibiting a peculiar partitioning behavior into silicate melts in contact with minerals. Partitioning behaviors of Pb between silicate mineral and melt have been known to depend on melt composition and thus, the atomic structures of corresponding silicate liquids. Despite the importance, detailed structural studies of Pb-bearing silicate melts are still lacking due to experimental difficulties. Here, we explored the effect of lead content on the atomic structures, particularly the evolution of silicate networks in Pb-bearing sodium metasilicate ([(PbO)_x(Na₂O)_1-x]·SiO₂) glasses as a model system for trace metal bearing natural silicate melts, using ²⁹Si solid-state nuclear magnetic resonance (NMR) spectroscopy. As the PbO content increases, the ²⁹Si peak widths increase, and the maximum peak positions shift from -76.2, -77.8, -80.3, -81.5, -84.6, to -87.7 ppm with increasing PbO contents of 0, 0.25, 0.5, 0.67, 0.86, and 1, respectively. The ²⁹Si MAS NMR spectra for the glasses were simulated with Gaussian functions for Qⁿ species (SiO₄ tetrahedra with n BOs) for providing quantitative resolution. The simulation results reveal the evolution of each Qⁿ species with varying PbO content. Na-endmember Na₂SiO₃ glass consists of predominant Q² species together with equal proportions of Q¹ and Q³. As Pb replaces Na, the fraction of Q² species tends to decrease, while those for Q¹ and Q³ species increase indicating an increase in disproportionation among Qⁿ species. Simulation results on the ²⁹Si NMR spectrum showed increases in structural disorder and chemical disorder as evidenced by an increase in disproportionation factor with an increase in average cation field strengths of the network modifying cations. Changes in the topological and configurational disorder of the model silicate melt by Pb imply an intrinsic origin of macroscopic properties such as element partitioning behavior.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.90-111
• /
• 2021

Seojangdaeyajodo is a drawing of Jangyongyoung's military night training on February 12 (lunar leap month), 1795. Focusing on the Seojangdaeyajodo, the positions and roles of the low-ranking soldier belonging to Jangyongyoung, and the composition and characteristics of military uniforms for each role were examined. The results ascertained by the historical research on the military uniforms are as follows. Deungronggun, noeja, sunryeongsu and daegisu who were placed in front of the king's Seojangdae were the low-ranking soldiers belonging to Jangyongyoung. The soldiers who escorted the king around Seojangdae were lowranking soldiers belonging to Jangyongyoung. The military uniform of the deungronggun was consisted of a jeolrip, a black heopsu, red gweja, indigo jeondae, white haengjeon and black shoes. The low-ranking soldier's heopsu suggested that it could also be a sochangui. He carried a sword and a red lantern. Noeja were divided into a sinjeonsu and a jujangsu. The military uniform of the noeja was consisted of a Jujeolrip, a black heopsu, red gweja, indigo jeondae, white haengjeon, and black shoes. Sunryeongsu were divided into a sinsigisu and a younggisu. The military uniform of the sunryeongsu was consisted of a jeongeon, a black heopsu, red gweja, indigo jeondae white haengjeon and black shoes. He carried a sword and a red lantern. The military uniform of the daegisu was consisted of a jeongeon, a black heopsu, blue gweja, indigo jeondae, white haengjeon and black shoes. He carried a sword and a flag. The soldiers surrounding Seojangdae and the seongjeonggun defending the fortress were the Chogun. The military uniform of the chogun was consisted of a jeolrip, a black heopsu, houi, indigo jeondae, white haengjeon and straw shoes. Houi was applying the five directional colors: the east is blue, the west is white, the south is red, and the north is black. He carried a sword and a gun. It was presented as an illustration of costumes that could produce contents by reflecting on these historical results. The basic principle of the illustration was to present the standards for 3D content production or actual production. Samples of form, color, and material according to the times and status were presented. The front, the side, and the back of each costume and the feature were presented, and the colors were presented in RGB and CMYK.