• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.59-68
• /
• 2008

This study was carried out to investigate the effects of the Inside end-taping (Inside-ET) and Outside end-taping (Outside-ET) treatments on prevention of drying defects during radiofrequency/vacuum (RF/V) drying domestic yellow poplar log cross section with size of 20~75 mm in thickness and 120~470 mm in diameter. The treatments of Inside-ET and Outside-ET were quite effective for producing sound log cross sections with thinner than 33 mm and smaller than 270 mm in diameter. Even the 60 mm- and 75 mm-thick log cross sections, if the diameter was smaller than 30 cm, it might expect preventing formation of border checks by appropriate end-taping treatments. The positions of the observed border checks differed in diameter ranging at a relative radius about 0.50~0.63 diameter, and it was estimated that it was necessary to select the border position of end-taping treatment properly according to the diameter of log cross sections. It was observed that the radius of 0.3 diameter was the critical location for pretreatment for preventing formation of border checks in the log cross section with middle diameter. There were severe border checks and V-shaped cracks in the log cross section with large diameter. This was because of the severe variation of moisture content along radial direction of natural characteristic of domestic yellow poplar.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.157-165
• /
• 2015

Object : The goals of this research were to make Performance Enhanced Model(PE) taken the largest performance index (PI) through artificial variation of principle components calculated by principle component analysis for trial data, and to verify the effect through comparing kinematic factors between trial data (Raw) and PE. Method : Ten subjects (5 men, 5 women) were recruited and 80% of their maximal record was considered. The PI is a regression equation. In order to develop PE, we extracted Principle components from trial position data (by Principle Components Analysis (PCA)). Before PCA, we made 17 position data to 3 row matrix according to components. We calculated 3 eigen value (principle components) through PCA. And except Y (medial-lateral direction) component (because motion of Y component is small), principle components of X (anterior-posterior direction) and Z (vertical direction) components were changed as following. Changed principle components = principle components + principle components ${\times}$ k. After changing the each principle component, we reconstructed position data using the changed principle components and calculated performance index (PI). A Paired t-test was used to compare Raw data and Performance Enhanced Model data. The level of statistical significance was set at $p{\leq}0.05$. Result : The PI was significantly increased about 12.9kg at PE ($101.92{\pm}6.25$) when compared to the Raw data ($91.29{\pm}7.10$). It means that performance can be increased by optimizing 3D positions. The difference of kinematic factors as follows : the movement distance of the bar from start to lock out was significantly larger (about 1cm) for PE, the width of anterior-posterior bar position in full phase was significantly wider (about 1.3cm) for PE and the horizontal displacement toward the weightlifter after beginning of descent from maximal height was significantly greater (about 0.4cm) for PE. Additionally, the minimum knee angle in the 2-pull phase was significantly smaller (approximately 2.7cm) for the PE compared to that of the Raw. PE was decided at proximal position from the Raw (origin point (0,0)) of PC variation). Conclusion : PI was decided at proximal position from the Raw (origin point (0,0)) of PC variation). This means that Performance Enhanced Model was decided by similar motion to the Raw without a great change. Therefore, weightlifters could be accept Performance Enhanced Model easily, comfortably and without large stress. The Performance Enhance Model can provide training direction for athletes to improve their weightlifting records.

• The korean journal of orthodontics
• /
• v.33 no.2 s.97
• /
• pp.73-84
• /
• 2003

This study was performed to find out how much projection errors in the cephalometric measurements were made by vertical head rotation in taking posteroanterior cephalograms. 25 adults without any apparent facial asymmetry or severe sagittal skeletal discrepancy were selected and the posteroanterior cephalograms were taken with the head rotated $5^{\circ},\;10^{\circ}$ superior and inferior each to the reference $position(0^{\circ})$. The 7 height, 5 width and 6 angular measurements were taken at each 5 positions. Through the statistical analysis of all measurements taken at each rotated position, folowing results were obtained.1. The projection errors of height measurements were remarkably target than those of width or angular measure nents. f. Among the height measurements, the farther to the rotation axis the measurements were, the larger the projection errors were. 3. Among the width measurements, mandibular width and mandibular width of mandibular first molars showed significant differences between the values taken at each rotated position, while nasal width, maxillary width and intermolar width of maxillary first molars did not. 4. Among the angular measurements, the angle between horizontal reference line and the line that is connected to crista galli and antegonion or maxillare showed significant differences between the values taken at each rotated Position. The above results suggest that it is needed to the effort to keep constant head position for taking the useful posteroanterior cephalogra, because projection errors are caused by vertical head rotation.

• The korean journal of orthodontics
• /
• v.27 no.3 s.62
• /
• pp.445-456
• /
• 1997

This study was designed to examine the dental asymmetry in person with facial asymmetry and to examine the relationship between the degree of mandibular deviation and asymmetry of maxillary dental arch. The sample!, were divided to asymmetry group and normal group. The asymmetry group consisted of 21 subjects(6 males and 15 females) and their mean age was 23.5 years. The normal group consisted of 20 subjects(10 males and 10 females) and their mean age was 18.6 years. Anteroposterior, transverse position of all maxillary teeth except 3rd molars, vortical position of maxillary 1st molars, and angulation of central incisors were measured. The anterioposterior and transverse positions of teeth were measured on the maxillary dental casts, the vertical position of maxillary 1st molars and angulation of maxillary incisors were measured on posteroanterior cephalometric radiographs. The data were analyzed to examine whether significant asymmetries existed in each of the asymmetry and normal groups. The results of this study were as follows : 1. In the asymmetry group, the correlation between the degree of mandibular deviation and that of 3-dimensional dental asymmetry was not so high. 2. In the asymmetry group, the teeth in deviated side were more laterally positioned than that of undeviated side. There were differences in the anteroposterior position of maxillary 1st and 2nd molars and the angulation of maxillary central incisors. 3. In the asymmetry group, the transverse asymmetry was larger in the posterior teeth rather than in the anterior teeth and larger than the anteroposterior asymmetry.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.370-376
• /
• 2009

To produce uniform seedlings of tomato and cucumber with inexpensive way, their seedling quality by different light sources was investigated. The raising of seedling was performed by red LED (light emitting diodes), blue LED, red-blue mixed LED or fluorescent light with a fixed PPF(photosynthetic proton flux) level, about $40{\sim}60{\mu}mol{\cdot}m^{-2}{\cdot}sec^{-1}$. In the both tomato and cucumber, the rapid extension of hypocotyledonary axis was observed in Blue LED than fluorescent light, but opposite result was found in Red and mixed LED. During the nursery period of tomato and cucumber, the fresh weight was the highest in Red LED as 74% increasement in tomato and 74% in cucumber. In the case of seedling quality after the tomato nursery, there was no difference in the positions of 1st flower cluster and the number of bearing-flower per flower cluster by each light source. In case of cucumber, until 20th node, the setting ratio of female flower was higher in LED than fluorescent treatment, and also more healthy fruit setting was found in LED. Therefore, we assume that the Red or mixed (Red 2 + Blue 1) LED is more favorable to produce high quality tomato and cucumber seedlings in closed nursery facility.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.4
• /
• pp.59-88
• /
• 2008

For the success of the DMB market to meet consumers' demands for Ubiquitous Media and strengthen the nation's competitiveness, it's inevitable for us to activate DMB advertising as of main profit source for DMB Media, and to develop various types of DMB advertising which are linked to the profit model. So I'd like to look over the various types of DMB advertising which are suitable for DMB features as one of the efforts to activate DMB advertising. First of all, I've figured out what kinds of advertising are available for new media and which related technologies are required for DMB media. Through this research, I could find out what features of new media such as cable broadcasting, Internet and Mobile have become the source of developing various types of advertising and how to a great part to activate new media advertising markets by making the best use of their media features. This research also shows that DMB advertising has the high potential to be developed in various and effective types and kinds of advertising with its media feature and technological feature. This research observing DMB advertising cases showed that DMB advertising can be divided into 6 types such as forms, purposes, techniques, advertising positions, the use of LBS(Location Based Service), coupons and it could be developed into various kinds of DMB advertising dependent on each type. On the other hands, it would be great to have continual researches and follow-ups for various types of DMB advertising and the verification of the effectiveness for DMB advertising by performing potential DMB advertising.

• Journal of Periodontal and Implant Science
• /
• v.33 no.3
• /
• pp.519-531
• /
• 2003

The aim of present investigation was to clinically measure the thickness of palatal masticatory mucosa in the hard palate as potential donor site for mucogingival surgery, to determine the relation to shape of palatal vault, form of tooth, gender, and to serve the clinical criteria t o choose the proper surgical technique. 84(mean age:25yrs) systemically and periodontally healthy volunteers participated in this study and 18 standard measurement points were defined in the hard palate, located on 3 lies which ran at different distances parallel to the gingival margin. 6 positions were designated on each of these 3 lines between the level of canine and 2nd molar and a bone sounding technique using a periodontal probe with minimal local anesthesia was utilized to assess the thickness of palatal masticatory mucosa. Student t-test was used to determine the difference in mucosal thickness between 2 groups gender, shape of palatal vault (high palatal vault vs. low palatal vault), tooth form (short-wide vs. long narrow) The result of this study were as follows: 1. Soft tissue thickness progressively increased in sites further away from the gingival margin (p<0.01). 2. Depending on position, in line a and line c the masticatory mucosal thickness increased from Ca to M2(p<0.01), but in line b the thickness increased from Ca to P2, and decreased to M1 and increased again to M2. 3. Gender did not influence the thickness of masticatory mucosa. 4. Palatal vault shape was associated with the thickness of masticatory mucosa. Thickness of low palatal vault group was thicker than high palatal group between P2 and M2 position. 5. Form of tooth did not influence the thickness of masticatory mucosa. In conclusion, palatal vault shape was associated with the thickness of masticatory mucosa. So, mucogingival surgery can be considered as a treatment modality in high palatal vault group. But, Gender and tooth form did not influence the thickness of masticatory mucosa.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.119-128
• /
• 2007

With the development of digital technologies, CAID became an essential part in the industrial design process. Creating photo-realistic images from a virtual scene with 3D models is one of the specialized task for CAID users. This task requires a complex interface of setting the positions and the parameters of camera and lights for optimal rendering results. However, the user interface of existing CAID tools are not simple for designers because the task is mostly accomplished in a parameter setting dialogue window. This research address this interface issues, in particular the issues related to lighting, by developing and evaluating TLS(Tangible Lighting Studio) that uses Augmented Reality and Tangible User Interface. The interface of positioning objects and setting parameters become tangible and distributed in the workspace to support more intuitive rendering task. TLS consists of markers, and physical controller, and a see-through HMD(Head Mounted Display). The user can directly control the lighting parameters in the AR workspace. In the evaluation experiment, TLS provide higher effectiveness, efficiency and user satisfaction compared to existing GUI(Graphic User Interface) method. It is expected that the application of TLS can be expanded to photography education and architecture simulation.

• Journal of KIISE:Software and Applications
• /
• v.36 no.6
• /
• pp.431-442
• /
• 2009

The Software Product Line (SPL) engineering is one of the most promising software development paradigms. With Feature-Oriented Reuse Method (FORM), reusable and flexible components can be built to aid the delivery of various software products such as mobile phone and digital TV applications based on commonalities and variabilities identified during Feature modeling. Model Driven Architecture (MDA) is also an emerging technology which supports developing software products to work on different platforms with platform independent models (PIM). Combining advantages of these two approaches is helpful to build a group of software products which share common Features while working on various platforms. As first step to combine FORM with MDA, we extend UML2.0 with profiles by which FORM architectures and parameterized Statecharts can be modeled. Secondly, we provide rules to examine whether Features are allocated at positions of elements of Statecharts consistently between a Feature model and a parameterized Statechart. Some rules are designed to check the consistency between FORM architectures and parameterized Statecharts. A case study on an elevator control system is provided to demonstrate the feasibility of our modeling approach and consistency checking rules.

• Journal of Digital Contents Society
• /
• v.9 no.2
• /
• pp.203-211
• /
• 2008

Due to the advance of H/W and S/W techniques to play 3D sound, the virtual space contented by 3D graphics and sounds can provide users more improved realities and vividness. However for the small 3D contents developers and companies, it is hard to implement 3D sound techniques because the implementation requires expensive sound engines, 3D sound technical understanding and 3D sound programming skills. Therefore 3D-sound-playing-interface is necessary to easy and cost-effective 3D sound implementation. Using this interface, graphics experts can easily add 3D sound techniques to their applications. In this paper, the followings are designed and implemented as a preliminary stage in the way of developing the 3D sound playing interface. First, we develop 3D sound S/W modules converting mono to 3D sound in PC based systems. Second, we develop the interconnection modules to map 3D graphic objects and sound sources. The developed modules in this paper can allow the user to percept sound source position and surround effect at the moving positions in the virtual world. In the coming works, we are going to develop the more completed 3D sound playing interface consisted of the synchronization technique for sound and moving objects, and HRTF.