• Journal of Korea Entertainment Industry Association
• /
• v.14 no.3
• /
• pp.229-236
• /
• 2020

In this paper, the tone of Daegeum, one of the most representative wind instruments of our country, was analyzed. Daegeum is widely used as Jeongak Daegeum and Sanjo Daegeum, which are played in royal and wind music, and Sanjo Daegeum is mainly played in Sanjo, Sinawi and folk music. The reason why the two pieces of music are being played in different music genres is due to the improvement of the length of the pipe and the location of the finger holes, allowing the Sanjo Daegeum to perform faster than Jeongak Daegeum, apply various techniques, and make the choice of musical instruments harmonized with music by making the difference in tone. For timber analysis of Jeongak Daegeum and Sanjo Daegeum, the composition of the overtones was visually verified through Spectrogram and Spectrum Analizer, in which the results of recordings were recorded by playing octave low, flat, and octave high positions with the same power. From this, Jeongak Daegeum, which is rich in low-pitched sound, harmonizes with solemn music such as royal music, and Sanjo Daegeum, which has a relatively clear high-pitched sound, is well suited to bright music such as solo music.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1453-1463
• /
• 2021

Feeding is the most important behavior that represents the health and welfare of weanling pigs. The early detection of feed refusal is crucial for the control of disease in the initial stages and the detection of empty feeders for adding feed in a timely manner. This paper proposes a real-time technique for the detection and recognition of small pigs using a deep-leaning-based method. The proposed model focuses on detecting pigs on a feeder in a feeding position. Conventional methods detect pigs and then classify them into different behavior gestures. In contrast, in the proposed method, these two tasks are combined into a single process to detect only feeding behavior to increase the speed of detection. Considering the significant differences between pig behaviors at different sizes, adaptive adjustments are introduced into a you-only-look-once (YOLO) model, including an angle optimization strategy between the head and body for detecting a head in a feeder. According to experimental results, this method can detect the feeding behavior of pigs and screen non-feeding positions with 95.66%, 94.22%, and 96.56% average precision (AP) at an intersection over union (IoU) threshold of 0.5 for YOLOv3, YOLOv4, and an additional layer and with the proposed activation function, respectively. Drinking behavior was detected with 86.86%, 89.16%, and 86.41% AP at a 0.5 IoU threshold for YOLOv3, YOLOv4, and the proposed activation function, respectively. In terms of detection and classification, the results of our study demonstrate that the proposed method yields higher precision and recall compared to conventional methods.

• Journal of Veterinary Science
• /
• v.21 no.3
• /
• pp.41.1-41.12
• /
• 2020

Background: The poultry red mite, Dermanyssus gallinae, is a serious problem in the laying hen industry worldwide. Currently, the foremost control method for D. gallinae is the implementation of integrated pest management, the effective application of which necessitates a precise monitoring method. Objectives: The aim of the study was to propose an accurate monitoring method with a reliable protocol for caged-layer poultry farms, and to suggest an objective classification for assessing D. gallinae infestation on caged-layer poultry farms according to the number of mites collected using the developed monitoring method. Methods: We compared the numbers of mites collected from corrugated cardboard traps, regarding with length of sampling periods, sampling sites on cage, and sampling positions in farm buildings. The study also compared the mean numbers of mites collected by the developed method with the infestation levels using by the conventional monitoring methods in 37 caged-layer farm buildings. Results: The statistical validation provided the suitable monitoring method that the traps were installed for 2 days on feed boxes at 27 sampling points which included three vertical levels across nine equally divided zones of farms. Using this monitoring method, the D. gallinae infestation level can be assessed objectively on caged-layer poultry farms. Moreover, the method is more sensitive than the conventional method in detecting very small populations of mites. Conclusions: This method can be used to identify the initial stages of D. gallinae infestation in the caged-layer poultry farms, and therefore, will contribute to establishment of effective control strategies for this mite.

• Structural Engineering and Mechanics
• /
• v.85 no.2
• /
• pp.197-206
• /
• 2023

The deterioration caused by chloride penetration and carbonation plays a significant role in a concrete structure in a marine environment. The chloride corrosion in some marine concrete structures is invisible but can be dangerous in a sudden collapse. Therefore, as a novelty, this research investigates the ability of a non-destructive damage detection method named the Power Spectral Density (PSD) to diagnose damages caused only by chloride ions in concrete structures. Furthermore, the accuracy of this method in estimating the amount of annual damage caused by chloride in various parts and positions exposed to seawater was investigated. For this purpose, the RC Arosa bridge in Spain, which connects the island to the mainland via seawater, was numerically modeled and analyzed. As the first step, each element's bridge position was calculated, along with the chloride corrosion percentage in the reinforcements. The next step predicted the existence, location, and timing of damage to the entire concrete part of the bridge based on the amount of rebar corrosion each year. The PSD method was used to monitor the annual loss of reinforcement cross-section area, changes in dynamic characteristics such as stiffness and mass, and each year of the bridge structure's life using sensitivity equations and the linear least squares algorithm. This study showed that using different approaches to the PSD method based on rebar chloride corrosion and assuming 10% errors in software analysis can help predict the location and almost exact amount of damage zones over time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.2
• /
• pp.234-240
• /
• 2022

Floating-Harbor syndrome (FHS) is a rare genetic disorder. This report introduced in a patient with FHS. Distinctive facial characteristics, severe skeletal class 3 malocclusion with underdeveloped maxilla and protruded mandible, congenital missing teeth, microdontia and ectopic positions of maxillary teeth were presented in the patient. In his twin sister, mild skeletal class 3 malocclusion with protruded mandible was observed but congenital missing teeth and microdontia were not observed. High-arched palate, narrow V-shaped maxillary arch compared to wide and ovoid mandibular arch and inverse relationship between the maxillary and mandibular intermolar width resulted in posterior crossbite were confirmed by model analysis of the patient. These were not observed in the twins. Behaviorally, poor cooperation during dental treatment because of mental retardation was observed in the patient.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.4
• /
• pp.15-25
• /
• 2022

PURPOSE: This study examined the effect of bridge exercise-abdominal draw-in maneuver (ADIM) with hip adductor co-contraction on the TrA thickness and whether it is effective as a core stability exercise. METHODS: The subjects of this study, 33 men with no history in the past and who provided prior consent, were selected through interviews with male students of S University. The subjects performed five movements, including bridge exercise and ADIM, and performed two demonstrations and two exercises in advance. The abdominal muscles were measured using ultrasonography once in each movement, and the abdominal muscle tone was measured using a soft tissue tone measurement. RESULTS: There was a significant difference in the thickness between the TrA and Internal Oblique Muscles at various bridge positions (p < .05), and no significant difference with the External Oblique Muscle (p < .05). There was no significant difference in muscle tone in the Rectus abdominis part (p > .05), but a significant difference in the Oblique Muscle part (p < .05). The muscle tone of the Oblique Muscles by position showed a significant difference in Bridge, BHa, and BA compared to the rest position (p < .05), but no significant difference with BHaA (p > .05). CONCLUSION: The thickness of TrA could be increased through bridge exercise, and TrA could be activated properly using ADIM and may be an effective exercise for core stabilization.

• The Korea Journal of Herbology
• /
• v.28 no.3
• /
• pp.75-84
• /
• 2013

Objectives : The origin of Breeae Herba (So-gye) and Cirsii Herba (Dae-gye) is differently prescribed in Korean and Chinese modern pharmacopoeia. Since the similar morphological characteristics and chaotic plant names, moreover, the aerial part of Carduus crispus have been used as the Cirsii Herba. To develop a reliable method for correct identification of these herbal medicines and to evaluate the genetic relationship of these closely related plant species, we analyzed sequences of DNA barcode regions. Methods : Thirty-one samples of 6 medicinal plants (B. segeta, B. setosa, C. japonicum var. maackii, C. setidens, C. chanroenicum, and C. crispus) were collected from different habitate and nucleotide sequences of DNA barcode regions (rDNA-ITS, matK, and rbcL) were analyzed after amplification using appropriate primers reported in previous studies. The nucleotides of species-specific authentic marker and phylogenetic relations were estimated based on the entire sequences of DNA barcodes by the analysis of ClastalW and UPGMA, respectively. Results : In comparative analysis of DNA barcode sequences, we obtained specific nucleotides to discriminate the medicinal plant of Breeae/Cirsii Herba in species level and evaluated the phylogenetic relationship of these species. Futhermore, we identified distinct marker nucleotides enough to authenticate respective species. These sequence differences at corresponding positions were avaliable genetic markers to determine the botanical origins of Breeae Herbal as well as Cirsii Herba. Conclusions : These marker nucleotides would be useful to identify the official herbal medicines by providing of definitive information that can identify each plant species and distinguish from unauthentic adulterants and substitutes.

• The Korea Journal of Herbology
• /
• v.28 no.5
• /
• pp.1-6
• /
• 2013

Objectives : This study was conducted to identify the original Sinomini Caulis et Rhizoma plant among Stephania tetrandra, Cocculus trilobus, and Aristolochiae fangchi to develop the genetic marker for Sinomini Caulis et Rhizoma. Methods : Sinomenium acutum was identified by the classification and identification committee of the National Center for Standardization of Herbal Medicines. The chloroplast ndhF gene was amplified. We performed sequences alignment analysis of Sinomenium acutum, Stephania tetrandra, C. trilobus, and A. fangchi using BioEdit program. The SFR markers designed were consisted of SF01, SR04, and SR05 primers. Results : Many variations of Sinomeni Caulis et Rhizoma are currently commercialized as herbal medicine. We compared the base sequences of the ndhF intergenic space of chloroplast DNA with Sinomenium acutum, Stephania tetrandra, C. trilobus, and A. fangchi. According to the results, it showed that the nucleotide variations were seen in 30 genes of four species. Phylogenetic analysis revealed that 4 species were classified into five groups based on an inter-group divergence in nucleotide sequence of 9%. We developed SFR marker nucleotides enough to authenticate respective species and confirmed its application on the band size at 419 base pair. These sequence differences at corresponding positions were available genetic markers to identity the Sinomeni Caulis et Rhizoma. Conclusions : Base on these results, the ndhF region was effective in distinguishing Sinomini Caulis et Rhizoma The SFR genetic marker was useful for identifying Sinomini Caulis et Rhizoma with other species.

• The Korea Journal of Herbology
• /
• v.34 no.6
• /
• pp.91-97
• /
• 2019

Objective : To establish a reliable tool between for the distinction of original plants of Sanguisorbae Radix, we analyzed the complete chloroplast genome sequence of Sanguisorbae Radix and identified single nucleotide polymorphisms (SNPs). Materials and methods : The chloroplast genome sequence of Sanguisorba officinalis, Sanguisorba tenuifolia f. alba (Trautv. & Mey.) Kitam and Sanguisorba tenuifolia Fisch. ex Link obtained using next-generation sequencing technology were described and compared with those of other species to develop specific markers. Candidate genetic markers were identified to distinguish species from the chloroplast sequences of each species using Modified Phred Phrap Consed and CLC Genomics Workbench programs. Results : The structure of the chloroplast genome of each sample that had been assembled and verified was circular, and the length was about 155 kbp. Through comparative analysis of the chloroplast sequences, we found 220 nucleotides, 158 SNPs, and 62 Indel (insertion and/or deletion), to distinguish Sanguisorba officinalis, Sanguisorba tenuifolia f. alba (Trautv. & Mey.) Kitam and Sanguisorba tenuifolia Fisch. ex Link. Finally, 15 specific SNP genetic markers were selected for the verification at positions. Avaliable primers for the dried herb, which is used as medicine, were used to develop the PCR amplification product of Sanguisorbae Radix to assess the applicability of PCR analysis. Conclusion : In this study, we found that Fendel-qPCR analysis based on the chloroplast DNA sequences can be an efficient tool for discrimination of Sanguisorba officinalis, Sanguisorba tenuifolia f. alba (Trautv. & Mey.) Kitam and Sanguisorba tenuifolia Fisch. ex Link.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.4
• /
• pp.217-231
• /
• 2022

Reinforced polyurethane foam (R-PUF), a material for liquefied natural gas cargo containment systems, is expected to have different mechanical properties depending on its stacking position of foaming as the glass fiber reinforcement of R-PUF sinks inside R-PUF under the influence of gravity. In addition, since R-PUF is not a homogeneous material, it is also expected that the coordinate direction within this material has a great correlation with the mechanical properties. So, this study was conducted to confirm this correlation with the one between the mechanical properties and the stacking position. In particular, in this study, R-PUF of 3 different densities (130, 170, and 210 kg/m³) was used, and tensile, compression, and shear tests of this material were performed under 5 temperatures. As a result of the tests, it was confirmed that the strength and modulus of elasticity of the material increased as the temperature decreased. Specifically, the strength and modulus of elasticity in the Z direction, which was the lamination direction, tended to be lower than those in the other directions. Finally, the strength and elastic modulus of different specimens of the material found at the bottom of their lamination compared to the specimens with these properties found at positions other than their lamination bottom were evaluated. Further analysis confirmed that as the temperature decreased, hardening of R-PUF occurred, indicating that the strength and modulus of elasticity increased. On the other hand, as the density of R-PUF increased, a sharp increase in strength and elastic modulus of R-PUF was observed.