• Physical Therapy Rehabilitation Science
• /
• v.9 no.3
• /
• pp.201-208
• /
• 2020

Objective: This study aimed to identify the effects of performing shoulder and hip abduction during the V-sit exercise on abdominal muscle activity. Design: Cross-sectional study. Methods: Thirty healthy adults volunteered for this experiment. The participants randomly performed 6 types of V-sit exercises, including V-sit alone (hip 0°, shoulder 0°), V-sit with hip abduction 0° and shoulder abduction 15°, V-sit with hip abduction 0° and shoulder abduction 30°, V-sit with hip abduction 15° and shoulder abduction 0°, V-sit with shoulder and hip abduction 15°, and V-sit with shoulder abduction 30° and hip abduction 15°. EMG data were recorded from the rectus abdominis (RA), external oblique (EO), and internal oblique (IO) muscles of both sides. All abdominal EMG data during the six types of V-sit exercises were measured for 5 seconds, three times, and recorded for the middle 3 seconds excluding the 1 second at the start and end. Results: V-sit with shoulder abduction 30° resulted in significantly greater muscle activity of both RA, EO compared to shoulder abduction 0°, shoulder abduction 15° (p<0.05) and V-sit with shoulder abduction 15° showed significantly greater muscle activation of the RA compared with shoulder abduction 0° (p<0.05). The muscle activity of both EO and IO in the V-sit with hip abduction 15° was significantly greater than hip abduction 0° in all shoulder conditions (p<0.05). Conclusions: Greater angles of shoulder and hip abduction produced more abdominal muscle activity increases during the V-sit exercises. Shoulder abduction affected the RA, EO muscle activation and hip abduction affected the EO, IO muscle activation. This study showed that shoulder and hip abduction during V-sit exercises enabled effective activation of the trunk muscles.

• Journal of Preventive Medicine and Public Health
• /
• v.41 no.3
• /
• pp.186-194
• /
• 2008

Objectives : This study describes trends in the socioeconomic disparities in breast cancer screening among US women aged 40 or over, from 2000 to 2005. We assessed 1) the disparities in each socioeconomic dimension; 2) the changes in screening mammography rates over time according to income, education, and race; and 3) the sizes and trends of the disparities over time. Methods : Using data from the Behavioral Risk Factor Surveillance System (BRFSS) from 2000 to 2005, we calculated the age-adjusted screening rate according to relative household income, education level, health insurance, and race. Odds ratios and the relative inequality index (RII) were also calculated, controlling for age. Results : Women in their 40s and those with lower relative incomes were less likely to undergo screening mammography. The disparity based on relative income was greater than that based on education or race (the RII among low-income women across the survey years was 3.00 to 3.48). The overall participation rate and absolute differences among socioeconomic groups changed little or decreased slightly across the survey years. However, the degree of each socioeconomic disparity and the relative inequality among socioeconomic positions remained quite consistent. Conclusions : These findings suggest that the trend of the disparity in breast cancer screening varied by socioeconomic dimension. Continued differences in breast cancer screening rates related to income level should be considered in future efforts to decrease the disparities in breast cancer among socioeconomic groups. More focused interventions, as well as the monitoring of trends in cancer screening participation by income and education, are needed in different social settings.

• The Plant Pathology Journal
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2016

In this study, the full-length nucleotide sequences of four Iranian PVY isolates belonging to $PVY^N$ strain were determined. The genome of Iranian PVY isolates were 9,703-9,707 nucleotides long encoding all potyviral cistrons including P1, HC-Pro, P3, 6K1, CI, 6K2, VPg, NIa-Pro, NIb and CP with coding regions of 825, 1,395, 1,095, 156, 1,902, 156, 564, 732, 1,557 and 801 nucleotides in length, respectively. The length of pipo, embedded in the P3 cistron, was 231 nucleotides. Phylogenetic analysis showed that the Iranian isolates clustered with European recombinant NTN isolates in the N lineage. Recombination analysis demonstrated that Iranian $PVY^N$ isolates had a typical European $PVY^{NTN}$ genome having three recombinant junctions while $PVY^N$ and $PVY^O$ were identified as the parents. We used dN/dS methods to detect candidate amino acid positions for positive selection in viral proteins. The mean ${\omega}$ ratio differed among different genes. Using model M0, ${\omega}$ values were 0.267 (P1), 0.085 (HC-Pro), 0.153 (P3), 0.050 (CI), 0.078 (VPg), 0.087 (NIa-pro), 0.079 (NIb) and 0.165 (CP). The analysis showed different sites within P1, P3 and CP were under positive selection pressure, however, the sites varied among PVY populations. To the best of our knowledge, our analysis provides the first demonstration of population structure of $PVY^N$ strain in mid-Eurasia Iran using complete genome sequences and highlights the importance of recombination and selection pressure in the evolution of PVY.

• The Plant Pathology Journal
• /
• v.29 no.3
• /
• pp.234-241
• /
• 2013

Polygalacturonase (PG) gene is a typical gene family present in eukaryotes. Forty-nine PGs were mined from the genomes of Neurospora crassa and five Aspergillus species. The PGs were classified into 3 clades such as clade 1 for rhamno-PGs, clade 2 for exo-PGs and clade 3 for exo- and endo-PGs, which were further grouped into 13 sub-clades based on the polypeptide sequence similarity. In gene structure analysis, a total of 124 introns were present in 44 genes and five genes lacked introns to give an average of 2.5 introns per gene. Intron phase distribution was 64.5% for phase 0, 21.8% for phase 1, and 13.7% for phase 2, respectively. The introns varied in their sequences and their lengths ranged from 20 bp to 424 bp with an average of 65.9 bp, which is approximately half the size of introns in other fungal genes. There were 29 homologous intron blocks and 26 of those were sub-clade specific. Intron losses were counted in 18 introns in which no obvious phase preference for intron loss was observed. Eighteen introns were placed at novel positions, which is considerably higher than those of plant PGs. In an evolutionary sense both intron loss and gain must have taken place for shaping the current PGs in these fungi. Together with the small intron size, low conservation of homologous intron blocks and higher number of novel introns, PGs of fungal species seem to have recently undergone highly dynamic evolution.

• Archives of Plastic Surgery
• /
• v.41 no.5
• /
• pp.493-499
• /
• 2014

Background Maintaining stability and restoring the aesthetic appearance are the fundamental goals when managing zygomatic fractures. We aimed to evaluate the stability and anthropometric outcomes of zygomatic fracture patients who underwent two-point fixation involving the infraorbital rim and zygomaticomaxillary buttress via the transconjunctival and gingivobuccal approaches without any skin incisions. Methods We examined 15 zygomatic fracture patients who underwent two-point fixation during a 3-year period. Stability was evaluated using three-dimensional facial bone computed tomography. Superoinferior and anteroposterior displacement of the zygoma was quantified. The aesthetic appearance of the periorbital region was evaluated using indirect anthropometry with standardized clinical photographs. The ratios between the eye fissure height and width, and lower iris coverage ratio were used to evaluate aesthetical changes. The bony displacement and aesthetic ratios were analyzed using Wilcoxon or Friedman tests. The correlation between the preoperative zygoma position and anthropometric values was analyzed. Results The positions of the zygoma were similar to those on the contralateral side at the long-term follow-up. The preoperative anthropometric measurements on the fractured side differed from those on the contralateral side, although these values were close to the normal values at the long-term follow-up. Furthermore, we noted that the anteroposterior displacement strongly positively correlated with the lower iris coverage rate (Spearman's coefficient=0.678, P=0.005). Conclusions Two-point fixation of zygomatic fractures achieved stable outcomes on long-term follow-up, and also appeared to be reliable in restoring the aesthetic appearance of the periorbital region.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.192-204
• /
• 2004

The surface electromyographic(sEMG) analyses were knee joint angle during open kinetic chain exercise (OKC) and close kinetic chain exercise (CKC) in vastus medialis (VM), vastus lateralis (VL), and rectus femoralis (RF). Ten subjects with normal , aged 20 to 30(X=27.4, SD=3.23), were randomized Statistical techniques for data analysis were applied paired t-test. The 0.05 level of significane was used as the critical level for rejection of the null hypotheses for the study. And the results were: 1) Both OKC and CKC improved the strength of quadriceps muscle as the knee joint flexion was increased. 2) In OKC, the strength of VM was improved the most at the 30 degree angle. 3) In CKC, the strength of VM was improved the most at the 30 degree angle. 4) The VM/VL ratio was the largest at the 10 and 20 degree angles in OKC and CKC. 5) The VM/VL ratio at 10, 20, and 30 degree angles was significantly different between OKC and CKC (P < 0.05). Base on the results, the OKCE is recommended for the knee joint patients, especially for the patellofemoral pain syndrome patients, during the early phase of rehabilitation. In order to improve strength of the quadriceps, muscle strength training at 30 degree angle is recommended. In order to improve VM/VL ratio, 10 and 20 degree angles are recommended during OKCE and CKCE, respectively. Future researches are warranted comparing electromyographic analysis between OKCE and CKCE in the quadriceps at a certain work lead, and muscle strength performance in the quadriceps at different positions of foot.

• The Journal of Korean Physical Therapy
• /
• v.32 no.4
• /
• pp.238-244
• /
• 2020

Purpose: This study compared the effects of the fascial distortion model (FDM), foam rolling (FR), and self-stretching (SS) on the ankle dorsiflexion range of motion (ROM). Methods: Thirty subjects who had no more than 30° of ankle dorsiflexion ROM at the weight-bearing lunge test were recruited in this study. They were divided into three groups: (FDM, FR, and SS), and underwent each intervention for five minutes. Before and after the intervention, the ankle dorsiflexion ROM in the supine (the open-) and standing (the closed-kinetic chain) of the subjects were tested. The changes in the ROM between pre- and post-intervention and among the groups were analyzed. Results: All groups showed increased ankle dorsiflexion ROM after the intervention in both positions. In the position of the open kinetic chain, the changes in the ROM between pre- and post-intervention had significant differences among the groups, and the FDM was higher than the FR and SS. In the position of the closed kinetic chain, the ROM after the interventions and the changes in the ROM had significant differences among the groups, and FDM was higher than the FR (ROM after the intervention, the change in ROM) and SS (the change in ROM). Conclusion: These findings showed that FDM had more efficiency than the FR and SS as FDM had a stronger effect on increasing ankle dorsiflexion in a short, limited time. Clinicians who have limited time to treat their patients, particularly trying to increase ankle dorsiflexion ROM, should consider the application of FDM.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.171-180
• /
• 2008

This study was conducted to analyze the curling behavior of concrete slabs on grade under temperature loading through the laboratory tests and to investigate the effects of the support conditions of underlying layers on the curling behavior of the slab on grade systems. For the laboratory tests, the concrete slabs were fabricated and the temperature measurement sensors were installed. The temperature loading was applied intentionally and the time histories of the vertical displacements of the slab at several different positions were measured. One-layered underlying layers were made using different materials and different thicknesses. Two-layered underlying layers were also made to have the same composite stiffness each other, but the material of the upper layer was designed to be different The experimental analysis results showed that the trend of the displacement time histories of the slab was basically the same as that of the temperature gradient time histories. The characteristics of the curling behavior of the slab were analyzed by separating the regions of curling up and curling down. The difference in the vertical displacements at the center and comer decreased as the stiffness of the underlying layer became larger, and the upper layer's material of the underlying layers affected the curling behavior of the slab.

• Journal of Korean Society of Rural Planning
• /
• v.19 no.1
• /
• pp.123-135
• /
• 2013

The purpose of this study is to investigate industry-wise employment growth factors in rural areas. Regional economic vitalization is sensitive to internal and external interaction changes among various industrial and occupational sectors. Thus, rural regional economic vitalization requires a comprehensive approach in analyzing industry-dependent employment structures and growth factors in rural areas. However, research conducted thus far has mostly focused on agriculture and farmers. Considering the evidence that rural communities continue to be stagnant and 80% of the rural population is engaged in nonagricultural activities, it becomes necessary to review industry-specific employment change factors in rural areas. This study targeted 5 counties in Chungnam. The results revealed that agriculture, forestry, and fisheries occupied the foremost positions with regard to population employed and regional GRDP share. The influence of national growth on employment and business variation effects was as high as 98.1% and 78.6%, respectively, thus demonstrating the high likelihood of rural economy to be influenced by external factors. Growth in the public sector appeared to support employment structure. Moreover, wholesale and retail businesses, constituting 14.4% of employment in rural areas, showed a strong trend toward degeneration, to the extent that difficulties have been forecasted for the supply of goods and services essential for basic livelihood of the rural residents. The implications based on the above observations need to be considered for policy-making to ensure that industrial structure is modified on the basis of internal demand of the region, and support for small businesses is integrated in rural area development projects.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.13-21
• /
• 2017

PURPOSES : In this research, an SB3-level roadside barrier for a highway transition zone that meets the newly established guide Installation and Management Guide for Roadside Safety Appurtenance is developed. Its performance is evaluated by a numerical simulation and real-scale vehicle impact test. METHODS : The commercial explicit dynamic software LS-DYNA is utilized for impact simulation. An FE model of a passenger vehicle developed and released by the National Crash Analysis Center (NCAC) at George Washington University and a heavy goods vehicle (HGV) model developed by the TC226/CM-E Work Group are utilized for impact simulation. The original vehicle models were modified to reflect the conditions of test vehicles. The impact positions of the passenger vehicle and truck to the transition guardrail were set as 1/2 and 3/4 of the transition region, respectively, according to the guide. RESULTS : Based on the numerical simulation results of the existing transition barrier, a new structural system with improved performance was suggested. According to the result of a numerical simulation of the suggested structural system, two sets of transition barriers were manufactured and installed for real-scale vehicle impact tests. The tests were performed at a test field for roadside safety hardware of the Korea Highway Corporation Research Institute. CONCLUSIONS : The results of both the real-vehicle impact tests and numerical simulations of the developed transition barrier satisfied the performance criteria, and the results of numerical simulation showed good correlation with the test results.