• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.1
• /
• pp.43-51
• /
• 2019

PURPOSE: To prevent secondary complications from decreased pulmonary functions and promote neurological recovery, identification of respiratory capacity change patterns depending on different postures of stroke patients and investigation of their properties are needed for active rehabilitation. Therefore, this study was conducted to investigate the changes in vital capacity in response to different positions and to implement the results as clinical data. METHODS: A respiratory function test was administered to 52 patients with stroke in the sitting, supine, paretic side lying, and non-paretic side lying positions. Pulmonary function indexes used for comparison were forced vital capacity (FVC), forced expiratory volume at 1 second (FEV1), forced expiratory flow 25-75% (FEF 25-75%), and maximum voluntary ventilation (MVV). One-way repeated ANOVA was used for analysis, and post hoc analysis was conducted using least significant difference (LSD). RESULTS: All pulmonary function indexes were measured in the order of sitting, paretic side lying, supine, and non-paretic side lying positions. Excluding the FEF25-75% and MVV of the supine compared with the paretic side lying position, all other pulmonary function indexes differed significantly (p<.05). CONCLUSION: There are differences in pulmonary function indexes depending on different postures of stroke patients, and the study showed that the non-paretic side lying position yielded the greatest effect on lung ventilation mechanisms. Based on these results, appropriate postures need to be considered during physical therapy interventions for stroke patients.

• Journal of Industrial Convergence
• /
• v.15 no.2
• /
• pp.1-6
• /
• 2017

This paper illustrates key features of an enterprise employment simulation which integrates a system dynamic feedback model with a cost-effectiveness optimisation capability utilising genetic algorithms. Its core is a 3-dimensional array structure tracking staff numbers by rank, by time-in-rank, by years-of-service. The resultant model, which could readily be adapted to non-Defence use, can identify, given user specification of any mix of employment rules, the likely patterns of employment behaviour including: resultant time-in-rank and years-of-service profiles; ability of a Unit to fill all positions to target strength; ability to fill promotional positions within normal rules for substantive promotion; need to fill promotional positions using rules for temporary promotion or transfer from outside; necessary recruitment pattern to sustain target strength.

• PNF and Movement
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2021

Purpose: The purpose of this study was to determine how the position of tibial rotation affects peak force and hamstring muscle activation during isometric knee flexion in healthy women. Methods: Seventeen healthy women performed maximum isometric knee flexion at 30˚ with three tibial rotation positions (tibial internal rotation, neutral position, and tibial external rotation). Surface electromyographic (EMG) activity was recorded from the medial hamstring (MH) and lateral hamstring (LH) muscles. The strength of the knee flexor was measured with a load-cell-type strength-measurement sensor. Data were analyzed using one-way repeated analysis of variance. Results: The results showed that MH and LH activities and peak force were significantly different among the three tibial rotation conditions (p < 0.01). The post-hoc comparison revealed that the MH EMG activity in tibial neutral and internal rotation positions were significantly greater than tibial external rotation (p < 0.01). The LH activity in tibial external rotation was significantly greater than the tibial neutral position and internal rotation (p < 0.01). The peak force of the knee flexor was also greater in the external tibial rotation position compared with the tibial neutral and internal rotation positions (p < 0.01). Conclusion: Our findings suggest that hamstring muscle activation could be changed by tibial rotation.

• Korean Journal of Metals and Materials
• /
• v.47 no.2
• /
• pp.121-128
• /
• 2009

The strain, microstructure and mechanical properties through thickness of an oxygen free copper(OFC) processed by differential speed rolling(DSR) were investigated in detail. The OFC sample with thickness of 1 mm was rolled to 35% reduction at ambient temperature without lubrication changing the differential speed ratio from 1.0:1 to 2.2:1. The shear strain introduced by the conventional rolling showed positive values at positions of upper roll side and negative values at positions of lower roll side. However, it showed zero or positive values at all positions for the samples rolled by the DSR. The effects of strain distribution through thickness of the coper sheets on microstructure, texture and mechanical properties are discussed in the present study.

• The Korean Journal of Emergency Medical Services
• /
• v.25 no.3
• /
• pp.179-188
• /
• 2021

Purpose: This study aimed to identify effective cardiopulmonary resuscitation methods by comparing the fatigue of rescuers according to various positions in cardiopulmonary resuscitation situations conducted on beds in hospitals. Methods: An experimental study of students in the department of emergency medical service in H University, G Metropolitan City was conducted in four positions for applying chest pressure on mannequins on beds. Results: As a result of measuring the muscle fatigue of four muscle attachments according to the four positions conducted on the bed, the average was 3.4%, the P was significant at 0.001, and the fatigue difference was confirmed to occur depending on the attachment. An analysis of pressure depth by pose revealed that P1, P2, P3, and P4 have a depth of 58.3, 55.1, 56.4, and 56.3 mm, respectively, with P4 having the deepest depth. Conclusion: Among the various postures of the rescuer during cardiopulmonary resuscitation performed on the bed in the hospital, P1 is thought to be the most tiring, although its associated CPR quality is good.

• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.46-53
• /
• 1992

Finger movements in the sagittal plane mainly consist of flexion and extension about the metacarpophalangeal(MCP) and proximal interphalangeal(PIP) joints. A kinematic finger model was developed with the assumption of constant tendon moment arms. Equations of static equilibrium were derived for the finger model using the principle of virtual work. Equations of static equilibrium for the finger model were indeterminate since only three equations were available for five unknown variables(forces). The number of variables was reduced based on information on muscular activities in finger movements. Then the amounts of forces which muscles exerted to maintain static equilibrium against external loads were computed from the equilibrium equations. The muscular forces were expressed mathematically as functions of finger positions, tendon moment arms, lengths of phalanges, and the magnitude and direction of external load. The external finger strength were computed using the equations of muscular forces and anatomical data. Experiments were performed to measure finger strengths. Measurements were taken in combinations of four finger positions and four directions of force exertions. Validation of the finger models and of procedure to estimate finger strengths was done by comparing the results of computations and experiments. Significang differences were found between the predicted and measured finger strengths. However, the trends of finger strengths with respect to finger positions were similar inboth the predicted and measured. These findings indicate that the finger model and the procedure to predict finger strengths were correctly developed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2157-2169
• /
• 2023

In order to handle the problem that puncture patterns will change the position distribution of original information bits and frozen bits in polar codes, which affects performance of puncture polar codes further, a minimum row weight and polar spectrum based puncture polar codes construction algorithm (called PA-MRWP) is proposed in this paper. The algorithm calculates row weight of generator matrix and sorts the row weight in ascending order first. Next, the positions with the minimum row weight are selected as initial puncture positions. If the rows with the same row weight cannot all be punctured, polar spectrum based auxiliary puncture scheme is used. In sub-channels with the same row weight, rows corresponding to the polarized sub-channels with higher reliability are selected as puncture positions to construct puncture vector, and the reliability is calculated based on polar spectrum. It is actually a two-step selection strategy, the proposed minimum row weight puncture (MRWP) algorithm is used for primary selection and polar spectrum based auxiliary puncture is used for adjustment. Simulation results show that, compared with worst quality puncture (WQP) algorithm, the proposed PA-MRWP algorithm and Gaussian approximation-aided minimum row weight puncture (GA-MRWP) algorithm provide gains of about 0.46 dB and 0.29 dB at bit error rate (BER) of 10^-4, respectively when code length N=400, code rate R=1/2. In addition, the proposed puncture algorithms improve the BER performance significantly with respect to quasi-uniform puncture (QUP) algorithm.

• Animal Bioscience
• /
• v.36 no.11
• /
• pp.1769-1774
• /
• 2023

Objective: Resting comfort may influence sleep-related lying postures in cattle. This study aimed to investigate the effects of bed cleanliness on tucked (TSP) and extended (ESP) head positions in sleep-related lying postures. Methods: The study was conducted over two experimental periods. In each period, four Japanese Black fattening cattle were assigned to the cleaning treatment (CL), in which bedding material was replaced once during each experimental period. Four cattle were assigned to the control treatment (CON) with no bed cleaning. Daily duration, bout frequency, and bout length of sleep-related lying postures were measured, and bed moisture, ammonia concentration in the air, plasma cortisol, and serotonin concentration were also measured within one week before and after cleaning treatment in each period. Results: The bed moisture and ammonia concentrations decreased in CL after bed cleaning. Following bed cleaning, the duration and bout frequency of TSP in CL decreased compared to that observed in CON, whereas ESP in CL increased after bed cleaning. Total duration of sleep-related lying postures and cortisol and serotonin levels did not differ between CL and CON. Conclusion: These results suggest that cattle in sleep-related lying postures shifted from tucked head positions to extended head positions in response to improved bed cleanliness.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.4
• /
• pp.221-230
• /
• 2024

PURPOSE. This in vitro study was conducted to investigate the accuracy of intraoral scanner (IOS) for recording maximal intercuspal position (MIP) and border positions of the mandible. MATERIALS AND METHODS. Maxillary and mandibular master casts were articulated in MIP, protrusive, and lateral interocclusal position sequentially on a semi-adjustable articulator. For each articulation relation, sites of occlusal contacts (SOCs) and sites of clearance (SCs) were identified on the master casts with articulating paper (reference sites). IOS was used to take full arch scans and nine virtual interocclusal records (VIRs) for virtual articulation of models. Virtual SOCs and SCs were detected with 3D processing software and compared to those identified with the articulating paper. Sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) were calculated for each articulation relation. RESULTS. For MIP, IOS showed adequate sensitivity and NPV of 100%, and specificity and a PPV of 99%. For protrusive position, the IOS showed a sensitivity and a NPV of 100%, a high PPV of 86%, and a specificity of 83%. For lateral positions, the specificity and the PPV were high (93% and 79%, respectively), but the sensitivity and the NPV were below the clinically acceptable limits (28% and 56%, respectively). CONCLUSION. IOS displayed clinically acceptable accuracy for recording MIP and protrusive border mandibular position. However, IOS had less accuracy for lateral border mandibular position.

• The Korean Journal of Mycology
• /
• v.21 no.4
• /
• pp.293-300
• /
• 1993

For the enzymes AAT, GmDH, ME, GPI, LDH and IDH, nine, seven, four, nine, seven, and four different phenotypes, respectively, were observed. All six isolates of an unidentified sterile Pythium sp. isolated from field soil showed the same band positions for all six enzymes compared. These phenotypes were not similar to any of the known Pythium species. Two isolates of unknown Pythium species (145 and 299) showed the same band positions for all six enzymes. The phenotypes for all three unknown Pythium spp. were different from the other species in the experiment. Five isolates of P. heterothallicum showed the same band positions for all enzymes compared except one enzyme, lDH. Two isolates of P. torulosum showed the same band petitions for enzymes AAT, GmDH and ME, and three isolates of P. totulosum showed the same positions for enzymes GPI, LDH, and IDH. Single isolates of P. spinosum and P. irregulare showed the same band positions for enzymes AAT, GmDH and GPI. In conclusion, sterile types of Pythium species showed 100% similarities among themselves but did not show any similarity with all isolates of P. heterothallicum and P. spinosum isolate, and showed very low similarities with other isolates in general except with unknown Pythium isolate 306. Similarity levels between different species were low in general with few exceptions.