• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.755-759
• /
• 2010

Each four polycyclic aromatic hydrocarbons (PAHs) was reacted with OH radical at $1.5{\AA}$ distance by CAChe MOPAC 2000 program. These results were compared to those reported experimental results. Reaction positions of all four PAHs corresponded with predicted positions in which ${\Delta}$E(HOMO-LUMO) was approximately 4.7. Finally oxygen of OH radical combined with PAH and quinone form of products were produced. These results indicate that the proposed determining the ${\Delta}$E(HOMO-LUMO) can be effectively applied to predict reaction position of recalcitrant compounds such as dioxins, PCBs, POPs, and etc.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.39.1-39.1
• /
• 2016

The cosmic distance can be precisely determined using a 'standard ruler' imprinted by primordial baryon acoustic oscillation (hereafter BAO) in the early Universe. The BAO at the targeted epoch is observed by analyzing galaxy clustering in redshift space (hereafter RSD) of which theoretical formulation is not yet fully understood, and thus makes this methodology unsatisfactory. The BAO analysis through full RSD modeling is contaminated by the systematic uncertainty due to a non--linear smearing effect such as non-linear corrections and uncertainty caused by random viral velocity of galaxies. However, BAO can be probed independently of RSD contamination using the BAO peak positions located in the 2D anisotropic correlation function. A new methodology is presented to measure peak positions, to test whether it is also contaminated by the same systematics in RSD, and to provide the radial and transverse cosmic distances determined by the 2D BAO peak positions. We find that in our model independent anisotropic clustering analysis we can obtain about 2% and 5% constraints on $D_A$ and $H^{-1}$ respectively with current BOSS data which is competitive with other analysis.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.2
• /
• pp.1158-1162
• /
• 2017

The purpose of the study was to investigate the strength of sokinetic muscle by the position of a volleyball players. Analysis and comparison of shoulder dynamic stability will be conducted according to rotational movement of the shoulder during spiking and serving amongst the various positions. Fifty professional Korean female volleyball players (age: 20~30), all different positions - attacker (left and right), center, setter, and libero were The concentric peak torque, strength ration of the internal and external rotation of the shoulder girdle for both dominant and non-dominant arms. Firstly, there were significant differences found for the strength ratio between the setter and the other positions in the dominant arm. On a second note, there was a significant decrease in shoulder dynamic stabilization for both the attacker and center in the dominant arm. However, there were no significant differences for the setter or the libero. This study suggests that the isokinetic muscle strengths of the volleyball players are different from each other.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.12
• /
• pp.3539-3542
• /
• 2010

Selective mercuration at the 1,6-positions of 2-hydroxy derivative of Nile Red and its application towards $Hg^{2+}$-selective signaling was investigated. The 2-hydroxy Nile Red exhibited a selective UV-vis absorption and fluorescent signaling behavior towards $Hg^{2+}$ ions over common coexisting physiologically important metal ions in aqueous environment. $^1H$ NMR studies revealed that the mercuration was selectively effected at the 1,6-positions of 2-hydroxy Nile Red, which is quite different from that at the 6,8-positions for the parent Nile Red.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.469-475
• /
• 2003

The performance of a centrifugal compressor composed of an impeller, tandem diffuser rows and axial guide vanes has been predicted numerically and compared with available experimental results on its design rotational speed. The pitchwise-averaged mixing plane method was employed for the boundaries between rotor and stator to obtain steady state solutions. The overall characteristics showed differently according to the relative positions of tandem diffuser rows while the characteristics of impeller showed almost identical. The numerical results agree with the measured data in respect of their tendency. It turned out that 0% of relative positions is the worst case in terms of static pressure recovery and efficiency. According to the experimental results, some pressure fluctuations and malfunction of the compressor were observed for 75% case. However, this numerical calculation using mixing plane method did not capture any of those phenomena. Thus, unsteady flow calculation should be performed to investigate the stability of the compressor caused by different diffuser configuration.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.4
• /
• pp.25-30
• /
• 2010

Flow analysis and performa nce evaluation have been performed for a ventilation axial-flow fan with different positions of the motor. Two different positions of motor have been tested; one is in front of the impeller and the other is behind the impeller. Flow analyses are performed by solving three-dimensional Reynolds-averaged Navier-Stokes equations through a finite-volume solver. Preliminary numerical calculations are carried out to test the performances of different turbulence models, i.e., SST model, k-$\omega$ model, and k-$\varepsilon$ model with and without using empirical wall function in the flow analysis. The validation of numerical analyses has been performed in comparison with the experimental data. The numerical results for the performance characteristics of the ventilation axial-flow fan with two different positions of the motor have been presented.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.88-89
• /
• 2013

For the purpose of launching strikes, initial survivability of self-propelled artilleries is of crucial importance despite the fact that they are mobility weapon systems. This study identifies the combat placement possibility of the reinforced concrete box-type artillery positions, which might enable the replacement of the current igloo-types, in terms of cost and protection capability. In the numerical analysis the obtained numerical values have proved that these facilities have sufficient protection capability. In addition, it could be concluded that these facilities are also cost-competitive, if more than five positions are constructed simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2763-2771
• /
• 1997

To determine the satellite orbital positions considering interference caused by inter-satellite systems is one of the most improtant issues in terms of optimal usage of satellite network resources. In this paper, considering ITU filing situation, we present the satellite orbital positions determination method to minimize iter-satellite system interference effect in the fixed satellite communication using an optimization method. Through the computer simulatio, it was shown that the proposed method is suitable to determine the satellite orbital positions.

• Textile Coloration and Finishing
• /
• v.16 no.5
• /
• pp.54-61
• /
• 2004

This research surveys the differences of fabric mechanical properties with the different looms and the fabric positions according to the warp and weft yarn tensions on the Vamatex and Omega-Panter looms respectively. For this purpose, the grey fabrics woven by PET filament using two test looms are dyed and finished. The processing shrinkages are measured on each processes such as dryer, scouring, pre-set, dyeing and final-set using the fabric density and width. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft yarn tensions of the two looms and the fabric positions. In addition, the fabric thickness according to the fabric positions such as right, left selvedges and center of the fabrics is also measured and discussed with the characteristics of the Vamatex and Omega-Panter looms.

• International Journal of Automotive Technology
• /
• v.6 no.2
• /
• pp.119-124
• /
• 2005

Size distribution of diesel particles measured by ELPI and SMPS were compared. The results of ELPI and SMPS showed acceptable agreements in the qualitative comparison but showed differences in the quantitative comparison. In addition, the results of ELPI and SMPS showed a same trend about the change of engine loads. In this study, the effects of dilution methods and measuring positions on the measurement of PM size distribution were also studied by using the SMPS. As results, the decrease of large particles and the increase of small particles were observed when the dilution air was heated. It was also observed that the number concentration of the diesel particles was varied within 20$\%$ by the different measuring positions of 140 cm.