• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.4
• /
• pp.58-64
• /
• 1992

이 논문에서는 Hoop속에 Ball이 구르는 간단한 전기 기계 구동 장치를 고려 하였다. 이 장치의 구조는 간단하지만 원유수송선과 같은 대형 액체를 고속 수송할 때 발생되는 "liquid slop"문제를 해석하고 제어하는데 좋은 모델이 된다. 본 연구에서는 liquid slop dynamics를 언급 하였고, 이러한 시스템을 제어 하기 위하여 재래식 PID, state-feedback 알고리즘의 유용성을 검토하였고 하이브리드 제어방식을 제안하였다. 하이브리드 제어방식이 다른방식보다 성능면에서 다소 우세함을 알 수 있었다.을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.386-390
• /
• 1998

A master-slave system is proposed as a teaching device for a dual arm robot. The slave robots are remotely controlled by two delta-type master arms. In order to help the operator to observe the target object from the desired position and desired direction, cameras are mounted on a specialized manipulator, Movements of two slave arms are coordinated with that of the cameras. Due to this coordinated movements, the operator needs not to care the geometrical relation between the cameras and the slave robots.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.447-448
• /
• 2017

본 논문은 위치 제어 시스템의 기계 제정수 추정 알고리즘을 제안한다. 추정 대상 제정수는 관성모멘트와 점성 마찰계수, 쿨롱 마찰계수이다. 제정수 추정에 대한 오차를 줄이기 위해, 적분 연산과 정현파의 위치 명령을 사용하였다. 시뮬레이션 및 실험을 통하여 이의 유효성을 입증하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1574-1575
• /
• 2007

"Dynamic Neural Unit"(DNU) based upon the topology of a reverberating circuit in a neuronal pool of the central nervous system. In this thesis, we present a genetic DNU-control scheme for unknown nonlinear systems. Our methodis different from those using supervised learning algorithms, such as the backpropagation (BP) algorithm, that needs training information in each step. The contributions of this thesis are the new approach to constructing neural network architecture and its trainin.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.320.1-320
• /
• 2002

In a hard disk drive (HDD) control system, a state-space controller/observer design is popularly adopted fur its advantages such as effective filtering of position and velocity, use of estimation error to handle servo defects, etc. In this report, a systematic method is proposed to accommodate the transport delay in the plant dynamics into the state estimator. (omitted)

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1840-1843
• /
• 1997

The task environment of a robot is changing rapidly and task itself becomes complicated due to current industrial trends of multi-product and small lot size production. A convenient user-interfaced off-line programming(OLP) system is being developed in order to overcome the difficulty in teaching a robot task. Using the OLP system, operators can easily teach robot tasks off-line and verify feasibility of the task through simulation of a robot prior to the on-line execution. However, some task errors are inevitable by kinematic differences between the robot model in OLP and the actual robot. Three calibration methods using image information are proposed to compensate the kinematic differences. These methods compose of a relative position vector method, three point compensation method, and base line compensation method. To compensate a kinematic differences the vision system with one monochrome camera is used in the calibration experiment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.4
• /
• pp.37-41
• /
• 2013

A balance maintain system of Stewart platform using AHRS(Attitude and Heading Reference System) sensor is introduced. The Stewart platform is used for controlling a standing plate to keep up horizontal level at any slopes. To know current leaned degrees, AHRS sensor is used. We made feed-back system that AHRS sensor sends current status and the Stewart platform revises top plate to be equilibrium state.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.3
• /
• pp.149-154
• /
• 2002

In this paper, we propose a new graphic deformation algorithm for haptic interface system. Our deformable model is based on non-linear elasticity, anisotropy behavior and the finite element method. Also we developed controller for high-speed communication. The proposed controller is based on the PCI/FPGA technology, which could progress the capability of the position calculating and the force data transmitting. The haptic system is composed of the 6DOF force display device, the high-speed controller, HIR library for 3D graphic deformation algorithm and the haptic rendering algorithm. The developed system will be used on constructing the dynamical virtual environment. We demonstrate the relevance of this approach for the real-time simulating deformations of elastic objects. To show the efficiency of our system, we programmed the simulation of force reflecting. As the result of experiment, we found that it has high stability and easy to control for deformable object than some other systems.

• 전자공학회논문지 IE
• /
• v.45 no.2
• /
• pp.28-33
• /
• 2008

The paper is represented active robot soccer system using humanoid. many robot we implement the control method of several robot and the algorithm of robot soccer system. the position and direction of the robot is recognized quickly using color tag on the shoulder of robot and special personal computer. Humanoid robot soccer system in this paper develops better in existent wheel-driven soccer robot. Forward, through a lot of studies, self-moving soccer game like human with humanoid is possible.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1144-1148
• /
• 1991

The problems occurred when developing a automatic wheel deburring system are to make effective flexibility in model change and the irregularity of the position/shape of the burr, to select optimal robotic manufacturing process and to develope optimal end effector. The locations where burr exists are on flange, rim and spoke. Here will be discussed the optimal solution for the removal of rim burr by using robot. The research can be summarized as the automatic robot path generation by recognizing rim contour and automatic deburring process technique. Various rim contour data is generated automatically when the sensor which is fixed to robot is moving with the parallel motion to the wheel center axis and this generated data is transferred to the data storage system and converted to the robot path data. The robotic tool system which is suitable to the rim deburring process is developed by integrating tool, compliance function and sensor. And factory automation system controlled by robot controller and PC is developed. This system shows good productivity and flexibility.